Experimental Investigation of Stability of Emulsions Produced by Catastrophic Phase Inversion Using Non-Ionic Surfactants
Open Access
- 16 January 2025
- journal article
- research article
- Published by MDPI AG in Colloids and Interfaces
- Vol. 9 (1) , 6
Abstract
Emulsions stabilized by environmentally friendly surfactants have been at the center of research attention over recent decades. Non-ionic surfactants with good biodegradability, while being non-toxic and non-irritating, have dominated in this area. For a chosen system, the main goal is to engineer its properties for smaller droplet sizes and better stability, a process which is mainly derived from the emulsification method. In the present study, Ethylan 1005 and Ethylan 1008 were used as stabilizers, both alone and combined at different ratios, in eco-friendly emulsions produced by paraffin oil and Millipore water, via direct emulsification, catastrophic phase inversion and catastrophic phase inversion in droplets. During the experiments, the emulsions’ rheological behavior, phase separation, and droplet size distribution profiles were measured. Catastrophic phase inversion in droplets resulted in the finest droplet size distributions for both emulsifiers when used alone. As the concentration of Ethylan 1008 increased from 0% to 100% in the surfactant mixtures, the droplets’ mean diameter and range also increased, indicting degradation of emulsion stability. However, phase separation tests revealed the opposite. Explanation was found in the chemical structure of the two emulsions and the steric phenomena caused by this, while a semi-quantitative analysis of these trends was also developed.Keywords
This publication has 20 references indexed in Scilit:
- Emulsification and emulsion stability: The role of the interfacial propertiesAdvances in Colloid and Interface Science, 2021
- Phase inversion emulsification: Current understanding and applicationsAdvances in Colloid and Interface Science, 2015
- Detection of densely dispersed spherical bubbles in digital images based on a template matching techniqueColloids and Surfaces A: Physicochemical and Engineering Aspects, 2007
- Prediction of phase inversion in agitated vessels using a two-region modelChemical Engineering Science, 2005
- Ionic surfactants on fluid interfaces: determination of the adsorption; role of the salt and the type of the hydrophobic phaseColloids and Surfaces A: Physicochemical and Engineering Aspects, 2005
- Experimental investigation of phase inversion in a stirred vessel using LIFChemical Engineering Science, 2005
- Catastrophic phase inversion of abnormal emulsions in the vicinity of the locus of transitional inversionColloids and Surfaces A: Physicochemical and Engineering Aspects, 2004
- Using emulsion inversion in industrial processesAdvances in Colloid and Interface Science, 2004
- On the mechanism of catastrophic phase inversion in emulsionsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2003
- The effect of temperature on the phase equilibria and the types of dispersions of the ternary system composed of water, cyclohexane, and nonionic surfactantJournal of Colloid and Interface Science, 1968