Impact of Nanoparticles on Heat Transfer Enhancement and Thermal Performance Improvement in HTS Power Transformers
Open Access
Abstract
Despite the numerous benefits of high-temperature superconducting (HTS) power transformers, they are highly sensitive and vulnerable from a thermal perspective, particularly under fault current conditions due to their fault current tolerance properties. Ensuring the proper operation of the cooling system can enhance the transformer’s performance during fault and overload conditions. To improve the thermal management of this transformer in both convective heat transfer and nucleate boiling conditions, utilizing liquid nitrogen (LN2) nanofluid instead of conventional LN2 is a promising solution. In this study, a two-phase Eulerian model using ANSYS Fluent software is employed to analyze the impact of different volume fractions (VFs) of Al2O3 nanoparticles with a 40 nm diameter on the cooling performance of a power HTS transformer. The numerical simulations are conducted using the Ranz–Marshal method for heat transfer and the finite element method for solving the governing equations. Nanoparticle concentrations ranging from 0 to 1% are evaluated under various fault conditions. Additionally, the influence of nanoparticles on bubble behavior is examined, partially mitigating the blockage of cooler microchannels. The simulation reveals that adding nanoparticles to the fluid reduces the temperature of the hotspot by 29% in steady state and by 34–52% under different fault currents as a result of 0–46% enhancement of nucleate boiling heat transfer, thereby improving the cooling efficiency of the transformer.Keywords
This publication has 65 references indexed in Scilit:
- Effect of nanofluid sedimentation on heat transfer and critical heat flux in boiling flowsJournal of Thermal Analysis and Calorimetry, 2024
- Effect of particle diameter and void fraction on gas–solid two-phase flow: a numerical investigation using the Eulerian–Eulerian approachComputational Particle Mechanics, 2024
- Influence of field-dependent critical current on harmonic AC loss analysis in HTS coils for superconducting transformers supplying non-linear loadsCryogenics, 2021
- Effects of Nanoparticle Shapes on Heat and Mass Transfer of Nanofluid Thermocapillary Convection around a Gas BubbleMicrogravity Science and Technology, 2019
- Heat transfer enhancement in distribution transformers using TiO2 nanoparticlesAdvanced Powder Technology, 2019
- Effect of nanostructures on rapid boiling of water films: a comparative study by molecular dynamics simulationApplied Physics A, 2019
- AC loss simulation in a HTS 3-Phase 1 MVA transformer using H formulationCryogenics, 2018
- Flow boiling heat transfer to MgO-therminol 66 heat transfer fluid: Experimental assessment and correlation developmentApplied Thermal Engineering, 2018
- Optimization of Distributive Ratios of Apportioned Winding Configuration in HTS Power Transformers for Hysteresis Loss and Leakage Flux ReductionJournal of Superconductivity and Novel Magnetism, 2015
- No-load loss calculation of distribution transformers supplied by nonsinusoidal voltage using three-dimensional finite element analysisEnergy, 2013