A Defocus-Robust Encoded Pattern for Simultaneous Absolute Positioning and Parallelism Evaluation in High-Magnification Microscopy
- 30 January 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-14
Abstract
Microscopy-based positioning techniques are applicable to precision manufacturing scenarios, such as semiconductor fabrication. High-magnification microscopic metrology (e.g., using a 100× objective) provides an extremely small pixel equivalent size, thereby offering a solid physical basis for achieving nanometer-level absolute positioning. However, the extremely shallow depth of field—typically a few hundred nanometers—makes spatially varying defocus, mainly induced by target–stage parallelism errors, a critical obstacle to robust large-range positioning. Existing encoded-pattern absolute positioning methods are therefore often demonstrated at low magnification, where defocus is less severe. This paper proposes an encoded-pattern method that enables both defocus-robust absolute positioning and in-situ installation parallelism evaluation under high magnification. For positioning, a sub-pixel edge-gradient scheme is used to estimate feature locations with reduced sensitivity to blur. For parallelism evaluation, the defocus-dependent blur magnitude is leveraged to quantify the target tilt. Experiments demonstrate a positioning resolution characterized by a standard deviation of 0.8 nm and an RMSE of 115.5 nm over a 3 mm × 3 mm range. Moreover, the proposed in-situ parallelism evaluation estimates the target tilt with a mean absolute error of 94.8 nm.Keywords
Funding Information
- Major technical Program (JSGGZD20220822095401003)
- Shenzhen Science and Technology Program (RCYX202312110903450563)
- National Natural Science Foundation of China (52475552)
- Shenzhen Basic Research Project (JCYJ20241202123900002)
This publication has 29 references indexed in Scilit:
- Depth from Defocus technique for irregular particle imagesMeasurement, 2024
- Design and Parameter Optimization of Zero Position Code Considering Diffraction Based on Deep Learning Generative Adversarial NetworksNanomanufacturing and Metrology, 2024
- Measurement of Six-Degree-of-Freedom Absolute Postures Using a Phase-Encoded Pattern Target and a Monocular Vision SystemInternational Journal of Precision Engineering and Manufacturing, 2023
- Optical microscopy image restoration and its application in strain measurement by digital image correlation methodOptics and Lasers in Engineering, 2022
- Autofocusing technologies for whole slide imaging and automated microscopyJournal of Biophotonics, 2020
- Estimation of particle depth from two defocused images using the Fourier transformParticuology, 2020
- A robust level error estimation method for machine tool installationPrecision Engineering, 2019
- Realtime in-plane displacements tracking of the precision positioning stage based on computer micro-visionMechanical Systems and Signal Processing, 2019
- Absolute optical imaging position encoderMeasurement, 2015
- Monte Carlo evaluation of periodic error uncertaintyPrecision Engineering, 2007