Development of a device for cooling ladle liners for casting ladles
Open Access
- 1 January 2026
- journal article
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Journal of Applied Engineering Science
- Vol. 24 (1) , 107-116
Abstract
This article focuses on the controlled cooling process of the linings of ferroalloy production ladles. Analysis of the operating conditions of the linings revealed that temperature stresses during heating and cooling are the main cause of damage to the linings of high-temperature units. At the enterprise in question, the cooling process is uncontrolled when the lining is exposed to the workshop atmosphere. This leads to cracks forming in the lining and its subsequent destruction. Cooling schedules have been developed for the ladles under consideration, during which the resulting thermal stresses do not damage the lining. A device has been developed for the ladle liners to ensure the cooling process is kept on schedule. Incomplete liner replacement involves cooling the ladle by supplying a mixture of combustion gases from the ladle heating booth and air. The liner is cooled using a mixture of three media: ambient air from the workshop, combustion products from the ladle heating stand, and combustion products from the ferroalloy gas burnt in the burner. A cooling schedule for casting ladle liners has been developed to ensure that thermal stresses do not exceed the strength limit of the refractory materials. At the same time, the cooling time is reduced from 19 hours 30 minutes to 6 hours 50 minutes. The developed device enables the outer and inner walls of the lining to be cooled, secondary resources (ferroalloy gas and combustion products from the ladle heating stand) to be used.Keywords
Funding Information
- Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan
This publication has 22 references indexed in Scilit:
- Finite element (FE) analysis of thermal stress in production process of multi-layer lining ladleCase Studies in Thermal Engineering, 2024
- Assessment of Reliability and Technical Risks in the Operation of Heat Engineering UnitsRefractories and Industrial Ceramics, 2023
- A mathematical model for the thermal state of a steel ladleIronmaking & Steelmaking: Processes, Products and Applications, 2023
- Thermomechanical finite element modeling of steel ladle containing alumina spinel refractory liningFinite Elements in Analysis and Design, 2022
- Transient operation effects on the thermal and mechanical response of a large-scale rotary kilnResults in Engineering, 2022
- Analysis of Methods for Heating the Lining of High-Temperature UnitsRefractories and Industrial Ceramics, 2021
- Influence of heating and cooling rate on the stress state of the brick lining in a rotary kiln using finite element simulationsEngineering Failure Analysis, 2019
- Plan for modernization of a section that prepares steel-pouring ladles: introducing and improving the performance of monolithic linings and the complex of production equipmentRefractories and Industrial Ceramics, 2013
- Modeling of cooling of a steel-teeming ladleJournal of Engineering Physics and Thermophysics, 2013
- Efficiency of electrically heating the lining of steel-pouring ladlesMetallurgist, 2012