Stress Concentration Factor for Jute Fibre Reinforced PLA Composite Plate with Circular Cut-out and its Effect on Coconut Shell Powder
Open Access
- 1 March 2020
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 810 (1)
Abstract
In strictly engineering terms, the design of machine elements is focused reasonably on the regions where stress concentration occurs. Plates having holes are a practical requirement in various aeronautical, marine, naval, mechanical and civil arrangements. In many aerospace and naval machine components these kinds of holes are provided to reduce the overall weight of the assembly and to lay electrical and fuel lines. These two parameters were then used in the modified ANSYS, virtual crack closure technique to obtain the stress intensity factors. Very good Pressure vessel. Agreement between the finite element stresses and the theoretical stresses is seen. The intend of this work was to analyse stress concentration factor of Jute fibre reinforced PLA composite plate with circular cut-out and compare it with addition of coconut shell powder. The Ansys 2019 R2 Finite Element Analysis software was used to get the stress analysis of the composite plate. The shell 281 elements were used in meshing the models and this was due to their regular agreement around the circular cut-out that enabled the nodal displacements to be obtained at a constant distance from the circular cut-out. From the Ansys analysis, it is clearly evidenced that addition of CSP decreases the stress concentration factorKeywords
This publication has 12 references indexed in Scilit:
- Torsional failure of a knuckle joint of a universal steel coupling system during operation – A case studyEngineering Failure Analysis, 2007
- Advanced optimal tolerance design of mechanical assemblies with interrelated dimension chains and process precision limitsComputers in Industry, 2005
- Configuration design sensitivity analysis of dynamics for constrained mechanical systemsComputer Methods in Applied Mechanics and Engineering, 2001
- A variable input speed approach for improving the output motion characteristics of Watt-type pressesInternational Journal of Machine Tools and Manufacture, 2000
- Stress concentration around irregular holes using complex variable methodSādhanā, 1998
- Competitive and technology management strategy: a case study of TELCOInternational Journal of Technology Management, 1998
- Precision embossing alternative method of forming flat partsJournal of Materials Processing Technology, 1997
- Numerical analysis of stresses at oblique holes in plates subjected to tension and bendingThe Journal of Strain Analysis for Engineering Design, 1995
- Optimization of a double knuckle linkage drive with contrast mechanical advantage for mechanical pressesInternational Journal of Machine Tools and Manufacture, 1993
- Analysis and comparison of selected rotary linkage drives for mechanical pressesInternational Journal of Machine Tools and Manufacture, 1993