Bharat Modi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bharat Modi has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Ashish Gohil
Nirma University
2 shared publications- Kaushik M. Patel
Institute of Technology, Nirma University
2 shared publications Kaushik Patel
Nirma University
2 shared publications- Ashish M. Gohil
Department of Mechanical Engineering, Institute of Technology, Nirma University, Ahmedabad, India
1 shared publication - Harsh S. Soni
Institute of Technology, Nirma University, Ahmedabad 382481, Gujarat, India
1 shared publication - Manickam Ramachandran
REST Labs
1 shared publication
Latest Publications
- 3 July 2024
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 11 (3) , 1368-1381
Ultrasonic vibration-assisted single point incremental forming of hemispherical shaped component using AA3003 material
- 3 July 2024
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 11 (3) , 1368-1381
Ultrasonic vibration-assisted single point incremental forming of hemispherical shaped component using AA3003 material
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3122 (1) , 100018
Car crash analysis using FEA
With increase in day-to-day demand in automobile the rate of accidents is also being increased on daily basis. To ensure the safe journey of the passengers, the With increase in day-to-day demand in automobile the rate of accidents is also being increased on daily basis. To ensure the safe journey of the passengers, the
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3122 (1) , 100018
Car crash analysis using FEA
With increase in day-to-day demand in automobile the rate of accidents is also being increased on daily basis. To ensure the safe journey of the passengers, the With increase in day-to-day demand in automobile the rate of accidents is also being increased on daily basis. To ensure the safe journey of the passengers, the
- 19 October 2022
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 38 (6) , 680-691
Single-stage single point incremental square hole flanging of AA5052 material
Single-point incremental forming process is a cost-effective die-less process to form sheet metal parts. To implement the forming method in industrial applications, it is required to study forming of various shapes. The available literature on hole flanging by single-point incremental forming is mostly focused on cylindrical flanges and very few studies on the square flange are available. The available study on the square flange is based on multistage experiments. The single-stage forming can reduce the forming time significantly. Therefore, in this work, the single-stage single-point square hole flanging of AA5052-H32 sheet material has been studied. A process-specific fracture forming limit line is obtained by single point incremental hole flanging experiments to analyze the strain behavior during the forming of flanges. A definition of Limit Forming Ratio for square flanging has been proposed and its value for the flange forming has been obtained experimentally. The effect of precut square hole length, pre-cut square hole corner radius, and tool rotation on flange formability has been studied and presented. Moreover, forming forces evolving during the process, the microstructure of the material, and the surface roughness of the flange are analyzed and presented. The results show that the flange formability increases with increase in the pre-cut square hole corner radius; the tool rotation reduces the flange formability and increases the surface roughness.
- 19 October 2022
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 38 (6) , 680-691
Single-stage single point incremental square hole flanging of AA5052 material
Single-point incremental forming process is a cost-effective die-less process to form sheet metal parts. To implement the forming method in industrial applications, it is required to study forming of various shapes. The available literature on hole flanging by single-point incremental forming is mostly focused on cylindrical flanges and very few studies on the square flange are available. The available study on the square flange is based on multistage experiments. The single-stage forming can reduce the forming time significantly. Therefore, in this work, the single-stage single-point square hole flanging of AA5052-H32 sheet material has been studied. A process-specific fracture forming limit line is obtained by single point incremental hole flanging experiments to analyze the strain behavior during the forming of flanges. A definition of Limit Forming Ratio for square flanging has been proposed and its value for the flange forming has been obtained experimentally. The effect of precut square hole length, pre-cut square hole corner radius, and tool rotation on flange formability has been studied and presented. Moreover, forming forces evolving during the process, the microstructure of the material, and the surface roughness of the flange are analyzed and presented. The results show that the flange formability increases with increase in the pre-cut square hole corner radius; the tool rotation reduces the flange formability and increases the surface roughness.
- 22 May 2022
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 37 (16) , 1837-1849
Effect of amplitude of vibration in ultrasonic vibration-assisted single point incremental forming
In the recent past, ultrasonic vibration-assisted single-point incremental forming has gained the attention of the metal forming researchers’ interest. Being a latest development, the process is not completely established from the point of view of the underlying mechanism and the effect of the process variables on the formability of the component. The amplitude of vibration and frequency of vibration are two ultrasonic process-specific variables which may affect the formability of the component. In this research work, the effect of amplitude of vibration along with forming feed and step-depth have been studied by performing a groove test on AA3003 aluminum sheet. The FFL for the SPIF process is proposed based on the thickness strain of the tensile testing component. The critical value of amplitude of ultrasonic vibration and ultrasonic intensity is identified demarking the ultrasonic softening and ultrasonic hardening zone.
- 22 May 2022
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 37 (16) , 1837-1849
Effect of amplitude of vibration in ultrasonic vibration-assisted single point incremental forming
In the recent past, ultrasonic vibration-assisted single-point incremental forming has gained the attention of the metal forming researchers’ interest. Being a latest development, the process is not completely established from the point of view of the underlying mechanism and the effect of the process variables on the formability of the component. The amplitude of vibration and frequency of vibration are two ultrasonic process-specific variables which may affect the formability of the component. In this research work, the effect of amplitude of vibration along with forming feed and step-depth have been studied by performing a groove test on AA3003 aluminum sheet. The FFL for the SPIF process is proposed based on the thickness strain of the tensile testing component. The critical value of amplitude of ultrasonic vibration and ultrasonic intensity is identified demarking the ultrasonic softening and ultrasonic hardening zone.
- 1 January 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 38, 402-406
Three dimensional analysis of mechanical behavior of lumbar vertebra under impact load and its biomechanical importance
- 1 January 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 38, 402-406
Three dimensional analysis of mechanical behavior of lumbar vertebra under impact load and its biomechanical importance
- Open Access
- 1 December 2020
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1706 (1) , 012177
Effect of feed and step depth in hole flanging using single point incremental forming
Single Point Incremental Forming can be used to form hole flanges in automobile and aerospace applications. In hole flanging using single point incremental forming, a study on effect of feed and step depth on formability has been carried out. Hole flange thickness is taken as formability criterion. Moreover, effect of those parameters on surface roughness has also been studied to understand effect of Single Point Incremental Forming. The results obtained by experimental work were analyzed and are presented here.
- 1 December 2020
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1706 (1) , 012177
Open AccessEffect of feed and step depth in hole flanging using single point incremental forming
Single Point Incremental Forming can be used to form hole flanges in automobile and aerospace applications. In hole flanging using single point incremental forming, a study on effect of feed and step depth on formability has been carried out. Hole flange thickness is taken as formability criterion. Moreover, effect of those parameters on surface roughness has also been studied to understand effect of Single Point Incremental Forming. The results obtained by experimental work were analyzed and are presented here.
- 10 October 2020
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 235 (3) , 303-332
Review of the effect of process parameters on performance measures in the incremental sheet forming process
Incremental sheet forming process has developed the interest of researchers in the field of sheet metal forming due to high formability and capability to produce prototypes of new products at low cost and minimum lead time. Research work is going on in various front to enhance the process capabilities so that it can be explored for commercial production. In this article, progress and recent development in the field of incremental forming has been reviewed and presented for the benefit of practicing engineers and industry. The effect of various process parameters on the performance of the process have been summarized in this paper. Moreover, the issues which need attention are discussed towards the conclusion of this paper.
- 10 October 2020
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 235 (3) , 303-332
Review of the effect of process parameters on performance measures in the incremental sheet forming process
Incremental sheet forming process has developed the interest of researchers in the field of sheet metal forming due to high formability and capability to produce prototypes of new products at low cost and minimum lead time. Research work is going on in various front to enhance the process capabilities so that it can be explored for commercial production. In this article, progress and recent development in the field of incremental forming has been reviewed and presented for the benefit of practicing engineers and industry. The effect of various process parameters on the performance of the process have been summarized in this paper. Moreover, the issues which need attention are discussed towards the conclusion of this paper.
- Open Access
- 1 March 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 810 (1)
Stress Concentration Factor for Jute Fibre Reinforced PLA Composite Plate with Circular Cut-out and its Effect on Coconut Shell Powder
In strictly engineering terms, the design of machine elements is focused reasonably on the regions where stress concentration occurs. Plates having holes are a practical requirement in various aeronautical, marine, naval, mechanical and civil arrangements. In many aerospace and naval machine components these kinds of holes are provided to reduce the overall weight of the assembly and to lay electrical and fuel lines. These two parameters were then used in the modified ANSYS, virtual crack closure technique to obtain the stress intensity factors. Very good Pressure vessel. Agreement between the finite element stresses and the theoretical stresses is seen. The intend of this work was to analyse stress concentration factor of Jute fibre reinforced PLA composite plate with circular cut-out and compare it with addition of coconut shell powder. The Ansys 2019 R2 Finite Element Analysis software was used to get the stress analysis of the composite plate. The shell 281 elements were used in meshing the models and this was due to their regular agreement around the circular cut-out that enabled the nodal displacements to be obtained at a constant distance from the circular cut-out. From the Ansys analysis, it is clearly evidenced that addition of CSP decreases the stress concentration factor
- 1 March 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 810 (1)
Open AccessStress Concentration Factor for Jute Fibre Reinforced PLA Composite Plate with Circular Cut-out and its Effect on Coconut Shell Powder
In strictly engineering terms, the design of machine elements is focused reasonably on the regions where stress concentration occurs. Plates having holes are a practical requirement in various aeronautical, marine, naval, mechanical and civil arrangements. In many aerospace and naval machine components these kinds of holes are provided to reduce the overall weight of the assembly and to lay electrical and fuel lines. These two parameters were then used in the modified ANSYS, virtual crack closure technique to obtain the stress intensity factors. Very good Pressure vessel. Agreement between the finite element stresses and the theoretical stresses is seen. The intend of this work was to analyse stress concentration factor of Jute fibre reinforced PLA composite plate with circular cut-out and compare it with addition of coconut shell powder. The Ansys 2019 R2 Finite Element Analysis software was used to get the stress analysis of the composite plate. The shell 281 elements were used in meshing the models and this was due to their regular agreement around the circular cut-out that enabled the nodal displacements to be obtained at a constant distance from the circular cut-out. From the Ansys analysis, it is clearly evidenced that addition of CSP decreases the stress concentration factor