Fluoride Ions Effect on the Corrosion Behavior of Pure Aluminum in Deaerated 0.05 M Sulfuric Acid Solutions
Open Access
- 22 June 2023
- journal article
- research article
- Published by Wiley in ChemistrySelect
- Vol. 8 (24)
Abstract
The corrosion study of aluminum‐based materials is the topic of a great scientific attention because of increasing the applications in many sectors of these materials. The fluoride ions (F − ) effect on the corrosion behavior of pure aluminum in deaerated 0.05 M sulfuric acid (H 2 SO 4 ) solutions at 25 °C was investigated. The electrochemical measurements such as open circuit potential and potentiodynamic polarization were accomplished to study the effect of fluoride and sulfate ions present in the test solutions. The optical microscopic and atomic force microscopic images were taken to view the morphologies and surface roughness of pure aluminum which coincidence with the corrosion rates found from the immersion of the test specimens using weight loss method. The surface morphology and elemental compositions of pure aluminum was evaluated by scanning electron microscope and energy dispersive X‐ray spectroscopy, respectively. The results showed that the general corrosion was formed on the surface of pure aluminum. It is also revealed that the surface roughness and amount of corrosion of pure aluminum were increased by the presence of even a very small amount of fluoride ions in deaerated sulfuric acid solutions.Keywords
Funding Information
- Iwate University
- Ministry of Education, Culture, Sports, Science and Technology
This publication has 53 references indexed in Scilit:
- Corrosion Inhibition: Theory and Practice2011
- The study on microstructure and electrochemical properties of Al–Mg–Sn–Ga–Pb alloy anode material for Al/AgO batteryJournal of Solid State Electrochemistry, 2010
- The aluminum chemistry and corrosion in alkaline solutionsJournal of Nuclear Materials, 2009
- The effect of substrate orientation on the kinetics of ultra-thin oxide-film growth on Al single crystalsActa Materialia, 2008
- Factors That Influence Formation of AlF[sub 3] Passive Film on Aluminum in Li-Ion Battery Electrolytes with LiPF[sub 6]Journal of the Electrochemical Society, 2006
- Aluminum corrosion in deaerated pure waterJournal of Japan Institute of Light Metals, 2006
- Cathodic breakdown of anodic oxide film on Al and Al–Sn alloys in NaCl solutionElectrochimica Acta, 2005
- Corrosion behaviour of aluminium in hydrochloric acid (HCl) solution containing mercaptoacetic acidMaterials Letters, 2004
- Design and analysis of aluminum/air battery system for electric vehiclesJournal of Power Sources, 2002
- Electrolytic aluminium plating in molten salt mixtures based on AlCl3 I: Influence of the addition of tetramethylammonium chlorideSurface Technology, 1981