Diaphragm Splicing Deviation in Steel Bridge Deck: Effect on Fatigue Performance and Its Preventive Measures
Authors:
- 1 June 2021
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Performance of Constructed Facilities
- Vol. 35 (3) , 04021008
Abstract
Asymmetric scallop cutouts on the sides of a U-rib caused by diaphragm splicing deviation were detected in a bridge. To study the possible effect of this phenomenon on fatigue performance, the stresses of the asymmetric scallop cutout and the diaphragm-to-rib weld were tested, and the influence was compared with that of the symmetric case. This and numerical simulation showed that, for the side of the U-rib with the smaller-radius scallop cutout, the position of stress concentration transferred from the scallop cutout to the diaphragm-to-rib weld, and the stress value of the weld was greater than that of the scallop cutout, resulting in more fatigue damage to the weld. To reduce the adverse effect caused by the asymmetric scallop cutouts, an application experiment with a hammer peening was carried out, and the stresses before and after hammering were monitored. The results showed that hammer peening could improve the fatigue performance by inducing compressive stress.Keywords
This publication has 20 references indexed in Scilit:
- State-of-the-Art Review on the Causes and Mechanisms of Bridge CollapseJournal of Performance of Constructed Facilities, 2016
- Fatigue Assessment of the Diaphragm-to-Rib Welded Connection in Orthotropic Steel Deck Using Effective Notch Stress ApproachJournal of Failure Analysis and Prevention, 2014
- Hermetically Metal Sealing Random Vibration Damage Mechanism and Fatigue Life PredictionApplied Mechanics and Materials, 2013
- Behavior Response Analysis of Long Span Rigid-Frame Bridge Considering Construction ErrorApplied Mechanics and Materials, 2013
- Energy Damage Detection Strategy Based on Strain Responses for Long-Span Bridge StructuresJournal of Bridge Engineering, 2011
- Conditional sampling and experiment design for quantifying manufacturing error of transonic airfoil2011
- Effects of Fabrication Procedures on Fatigue Resistance of Welded Joints in Steel Orthotropic DecksJournal of Bridge Engineering, 2009
- Full-Scale Fatigue Tests of Steel Orthotropic Decks for the Williamsburg BridgeJournal of Bridge Engineering, 2003
- Analysis of Recent Bridge Failures in the United StatesJournal of Performance of Constructed Facilities, 2003
- Design and Construction Error Effects on Structural ReliabilityJournal of Structural Engineering, 1987