Development of Stress Intensity Factors for Subsurface Flaws in Plates Subjected to Polynomial Stress Distributions
- 18 April 2018
- journal article
- research article
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 140 (3)
Abstract
The stress intensity factor (SIF) solutions for subsurface flaws near the free surfaces of components, which are known to be important in engineering applications, have not been provided yet. Thus, in this paper, SIF solutions for subsurface flaws near the free surfaces in flat plates were numerically investigated based on the finite element analyses. The flaws with aspect ratios a/ℓ = 0.0, 0.1, 0.2, 0.3, 0.4, and 0.5, the normalized ratios a/d = 0.0, 0.1, 0.2, 0.4, 0.6, and 0.8, and d/t = 0.01 and 0.10 were taken into account, where a is the half flaw depth, ℓ is the flaw length, d is the distance from the center of the subsurface flaw to the nearest free surface, and t is the wall thickness. Fourth-order polynomial stress distribution in the thickness direction was considered. In addition, the developed SIF solutions were incorporated into a Japanese probabilistic fracture mechanics (PFM) code, and PFM analyses were performed for a Japanese reactor pressure vessel (RPV) containing a subsurface flaw near the inner surface. The PFM analysis results indicate that the obtained SIF solutions are effective in engineering applications.Keywords
This publication has 8 references indexed in Scilit:
- Probabilistic Fracture Mechanics Analysis Models for Japanese Reactor Pressure Vessels2017
- Development of Probabilistic Evaluation Models of Fracture Toughness KIc and KIa for Japanese RPV Steels2015
- Verification Analyses for Newly Developed Automatic 3D Finite Element Crack Propagation System2014
- Assessment of Residual Stress Due to Overlay-Welded Cladding and Structural Integrity of a Reactor Pressure VesselJournal of Pressure Vessel Technology, 2013
- Stress Intensity Factor Solution for Subsurface Flaw Estimated by Influence Function Method2006
- Analysis of Stress Intensity Factor for Embedded Crack Subjected to Arbitrarily Distributed Surface Stresses. Analysis and Application of Influence Coefficients for Flat Plates with an Embedded Elliptical Crack.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 1992
- Tension of a plate containing an embedded elliptical crackEngineering Fracture Mechanics, 1984
- Stress-Intensity Factor Equations for Cracks in Three-Dimensional Finite Bodies1983