Kai Lu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kai Lu has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Yinsheng Li
Japan Atomic Energy Agency
9 shared publications - Jinya Katsuyama
Nuclear Safety Research Center, Japan Atomic Energy Agency, 2-4 Shirakata, Tokai-mura, Naka-gun, Ibaraki 319-1195, Japan
7 shared publications - Akihiro Mano
Japan Atomic Energy Agency, Tokai, Ibaraki 3191195, Japan
2 shared publications - Fuminori Iwamatsu
Research and Development Group, Hitachi, Ltd., 7-1-1 Omikacho, Hitachi 319-1292, Ibaraki, Japan
1 shared publication - Koichi Masaki
Nuclear Safety Research Center, Japan Atomic Energy Agency, 2-4 Shirakata, Tokai-mura, Naka-gun, Ibaraki 319-1195, Japan
1 shared publication - Kunio Hasegawa
Japan Atomic Energy Agency , Tokai-mura, Naka-gun, Ibaraki-ken 319-1195, Japan
1 shared publication
Latest Publications
- Open Access
- 16 July 2021
- Published by ASME International
Improved Bayesian Update Method on Flaw Distributions Reflecting Non-Destructive Examination Result
We have developed a probabilistic fracture mechanics (PFM) analysis code PASCAL4 for evaluating failure frequency of reactor pressure vessels (RPVs) considering neutron irradiation embrittlement and pressurized thermal shock events. It is well-known that flaw distributions such as flaw size and density have an important role in failure frequency calculation by PFM analysis.
- 16 July 2021
- Published by ASME International
Open AccessImproved Bayesian Update Method on Flaw Distributions Reflecting Non-Destructive Examination Result
We have developed a probabilistic fracture mechanics (PFM) analysis code PASCAL4 for evaluating failure frequency of reactor pressure vessels (RPVs) considering neutron irradiation embrittlement and pressurized thermal shock events. It is well-known that flaw distributions such as flaw size and density have an important role in failure frequency calculation by PFM analysis.
- Open Access
- 16 July 2021
- Published by ASME International
Extension of Pascal4 Code for Probabilistic Fracture Mechanics Analysis of Reactor Pressure Vessel in Boiling Water Reactor
In Japan, Japan Atomic Energy Agency has developed a probabilistic fracture mechanics analysis code PASCAL4 for probabilistic integrity assessment of reactor pressure vessels in pressurized water reactors considering neutron irradiation embrittlement and cool-down transients (e.g., pressurized thermal shock events). However, PASCAL4 did not have the capability to consider the
- 16 July 2021
- Published by ASME International
Open AccessExtension of Pascal4 Code for Probabilistic Fracture Mechanics Analysis of Reactor Pressure Vessel in Boiling Water Reactor
In Japan, Japan Atomic Energy Agency has developed a probabilistic fracture mechanics analysis code PASCAL4 for probabilistic integrity assessment of reactor pressure vessels in pressurized water reactors considering neutron irradiation embrittlement and cool-down transients (e.g., pressurized thermal shock events). However, PASCAL4 did not have the capability to consider the
- 18 November 2020
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 143 (3)
Effect of Coolant Water Temperature of Emergency Core Cooling System on Failure Probability of Reactor Pressure Vessel
Structural integrity assessment of reactor pressure vessel (RPV) is important for the safe operation of nuclear power plant. For an RPV in a pressurized water reactor (PWR), pressurized thermal shock (PTS) resulted from rapid coolant water injection due to a loss-of-coolant accident is an issue of particular concern. The coolant water temperature in the emergency core cooling system (ECCS) can influence the integrity of RPV subjected to PTS events; thus, this paper is focused on investigating the effect of coolant water temperature of ECCS on failure probability of an RPV. First, thermal-hydraulic (TH) analyses were conducted for a Japanese PWR model plant by using RELAP5, and different coolant water temperatures in ECCS were considered to investigate the effect of coolant water temperature on TH behaviors during a PTS event. Using the TH analysis results, probabilistic fracture mechanics (PFM) analyses were performed for the RPV of the Japanese model plant. Based on the PFM analysis results, the effect of coolant water temperature on failure probability of the RPV was quantified.
- 18 November 2020
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 143 (3)
Effect of Coolant Water Temperature of Emergency Core Cooling System on Failure Probability of Reactor Pressure Vessel
Structural integrity assessment of reactor pressure vessel (RPV) is important for the safe operation of nuclear power plant. For an RPV in a pressurized water reactor (PWR), pressurized thermal shock (PTS) resulted from rapid coolant water injection due to a loss-of-coolant accident is an issue of particular concern. The coolant water temperature in the emergency core cooling system (ECCS) can influence the integrity of RPV subjected to PTS events; thus, this paper is focused on investigating the effect of coolant water temperature of ECCS on failure probability of an RPV. First, thermal-hydraulic (TH) analyses were conducted for a Japanese PWR model plant by using RELAP5, and different coolant water temperatures in ECCS were considered to investigate the effect of coolant water temperature on TH behaviors during a PTS event. Using the TH analysis results, probabilistic fracture mechanics (PFM) analyses were performed for the RPV of the Japanese model plant. Based on the PFM analysis results, the effect of coolant water temperature on failure probability of the RPV was quantified.
- 5 October 2020
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 143 (2)
Application of Probabilistic Fracture Mechanics to Reactor Pressure Vessel Using PASCAL4 Code
Probabilistic fracture mechanics (PFM) is considered to be a promising methodology in structural integrity assessments of pressure-boundary components in nuclear power plants since it can rationally represent the inherent probabilistic distributions for influence parameters without over-conservativeness. To strengthen the applicability of PFM methodology in Japan, Japan Atomic Energy Agency has developed a PFM analysis code PASCAL4 which enables the failure frequency evaluation of reactor pressure vessels (RPVs) considering neutron irradiation embrittlement and thermal transients. PASCAL4 is expected to make a significant contribution to the probabilistic integrity assessment of Japanese RPVs. In this study, PFM analysis for a Japanese model RPV in a pressurized water reactor (PWR) was conducted using PASCAL4, and the effects of nondestructive examination (NDE) and neutron flux reduction on failure frequencies of the RPV were quantitatively evaluated. From the analysis results, it is concluded that PASCAL4 is useful for probabilistic integrity assessments of embrittled RPVs and can enhance the applicability of PFM methodology.
- 5 October 2020
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 143 (2)
Application of Probabilistic Fracture Mechanics to Reactor Pressure Vessel Using PASCAL4 Code
Probabilistic fracture mechanics (PFM) is considered to be a promising methodology in structural integrity assessments of pressure-boundary components in nuclear power plants since it can rationally represent the inherent probabilistic distributions for influence parameters without over-conservativeness. To strengthen the applicability of PFM methodology in Japan, Japan Atomic Energy Agency has developed a PFM analysis code PASCAL4 which enables the failure frequency evaluation of reactor pressure vessels (RPVs) considering neutron irradiation embrittlement and thermal transients. PASCAL4 is expected to make a significant contribution to the probabilistic integrity assessment of Japanese RPVs. In this study, PFM analysis for a Japanese model RPV in a pressurized water reactor (PWR) was conducted using PASCAL4, and the effects of nondestructive examination (NDE) and neutron flux reduction on failure frequencies of the RPV were quantitatively evaluated. From the analysis results, it is concluded that PASCAL4 is useful for probabilistic integrity assessments of embrittled RPVs and can enhance the applicability of PFM methodology.
- 22 May 2020
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 142 (5)
Plasticity Correction on Stress Intensity Factor Evaluation for Underclad Cracks in Reactor Pressure Vessels
Structural integrity assessment of reactor pressure vessels (RPVs) is essential for the safe operation of nuclear power plants. For RPVs in pressurized water reactors (PWRs), the assessment should be performed by considering neutron irradiation embrittlement and pressurized thermal shock (PTS) events. To assess the structural integrity of an RPV, a traditional method is usually employed by comparing fracture toughness of the RPV material with the stress intensity factor (KI) of a crack postulated near the RPV inner surface. When an underclad crack (i.e., a crack beneath the cladding of an RPV) is postulated, KI of this crack can be increased owing to the plasticity effect of cladding. This is because the yield stress of cladding is lower than that of base metal and the cladding may yield earlier than base metal. In this paper, detailed three-dimensional (3D) finite element analyses (FEAs) were performed in consideration of the plasticity effect of cladding for underclad cracks postulated in Japanese RPVs. Based on the 3D FEA results, a plasticity correction method was proposed on KI calculations of underclad cracks. In addition, the effects of RPV geometries and loading conditions were investigated using the proposed plasticity correction method. Moreover, the applicability of the proposed method to the case which considers the hardening effect of materials after neutron irradiation was also investigated. All of these results indicate that the proposed plasticity correction method can be used for KI calculations of underclad cracks and is applicable to structural integrity assessment of Japanese RPVs containing underclad cracks.
- 22 May 2020
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 142 (5)
Plasticity Correction on Stress Intensity Factor Evaluation for Underclad Cracks in Reactor Pressure Vessels
Structural integrity assessment of reactor pressure vessels (RPVs) is essential for the safe operation of nuclear power plants. For RPVs in pressurized water reactors (PWRs), the assessment should be performed by considering neutron irradiation embrittlement and pressurized thermal shock (PTS) events. To assess the structural integrity of an RPV, a traditional method is usually employed by comparing fracture toughness of the RPV material with the stress intensity factor (KI) of a crack postulated near the RPV inner surface. When an underclad crack (i.e., a crack beneath the cladding of an RPV) is postulated, KI of this crack can be increased owing to the plasticity effect of cladding. This is because the yield stress of cladding is lower than that of base metal and the cladding may yield earlier than base metal. In this paper, detailed three-dimensional (3D) finite element analyses (FEAs) were performed in consideration of the plasticity effect of cladding for underclad cracks postulated in Japanese RPVs. Based on the 3D FEA results, a plasticity correction method was proposed on KI calculations of underclad cracks. In addition, the effects of RPV geometries and loading conditions were investigated using the proposed plasticity correction method. Moreover, the applicability of the proposed method to the case which considers the hardening effect of materials after neutron irradiation was also investigated. All of these results indicate that the proposed plasticity correction method can be used for KI calculations of underclad cracks and is applicable to structural integrity assessment of Japanese RPVs containing underclad cracks.
- 11 December 2019
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 142 (2)
Improvements on Evaluation Functions of a Probabilistic Fracture Mechanics Analysis Code for Reactor Pressure Vessels
In Japan, a probabilistic fracture mechanics (PFM) analysis code PASCAL was developed for structural integrity assessment of reactor pressure vessels (RPVs) considering neutron irradiation embrittlement and pressurized thermal shock (PTS) events. By reflecting the latest knowledge and findings, the evaluation functions are continuously improved and have been incorporated into PASCAL4 which is the most recent version of the PASCAL code. In this paper, the improvements made in PASCAL4 are explained in detail, such as the evaluation model of warm prestressing (WPS) effect, evaluation function of confidence levels for PFM analysis results by considering the epistemic and aleatory uncertainties in probabilistic variables, the recent stress intensity factor (KI) solutions, and improved methods for KI calculations when considering complicated stress distributions. Moreover, using PASCAL4, PFM analysis examples considering these improvements are presented.
- 11 December 2019
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 142 (2)
Improvements on Evaluation Functions of a Probabilistic Fracture Mechanics Analysis Code for Reactor Pressure Vessels
In Japan, a probabilistic fracture mechanics (PFM) analysis code PASCAL was developed for structural integrity assessment of reactor pressure vessels (RPVs) considering neutron irradiation embrittlement and pressurized thermal shock (PTS) events. By reflecting the latest knowledge and findings, the evaluation functions are continuously improved and have been incorporated into PASCAL4 which is the most recent version of the PASCAL code. In this paper, the improvements made in PASCAL4 are explained in detail, such as the evaluation model of warm prestressing (WPS) effect, evaluation function of confidence levels for PFM analysis results by considering the epistemic and aleatory uncertainties in probabilistic variables, the recent stress intensity factor (KI) solutions, and improved methods for KI calculations when considering complicated stress distributions. Moreover, using PASCAL4, PFM analysis examples considering these improvements are presented.
- 18 April 2018
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 140 (3)
Development of Stress Intensity Factors for Subsurface Flaws in Plates Subjected to Polynomial Stress Distributions
The stress intensity factor (SIF) solutions for subsurface flaws near the free surfaces of components, which are known to be important in engineering applications, have not been provided yet. Thus, in this paper, SIF solutions for subsurface flaws near the free surfaces in flat plates were numerically investigated based on the finite element analyses. The flaws with aspect ratios a/ℓ = 0.0, 0.1, 0.2, 0.3, 0.4, and 0.5, the normalized ratios a/d = 0.0, 0.1, 0.2, 0.4, 0.6, and 0.8, and d/t = 0.01 and 0.10 were taken into account, where a is the half flaw depth, ℓ is the flaw length, d is the distance from the center of the subsurface flaw to the nearest free surface, and t is the wall thickness. Fourth-order polynomial stress distribution in the thickness direction was considered. In addition, the developed SIF solutions were incorporated into a Japanese probabilistic fracture mechanics (PFM) code, and PFM analyses were performed for a Japanese reactor pressure vessel (RPV) containing a subsurface flaw near the inner surface. The PFM analysis results indicate that the obtained SIF solutions are effective in engineering applications.
- 18 April 2018
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 140 (3)
Development of Stress Intensity Factors for Subsurface Flaws in Plates Subjected to Polynomial Stress Distributions
The stress intensity factor (SIF) solutions for subsurface flaws near the free surfaces of components, which are known to be important in engineering applications, have not been provided yet. Thus, in this paper, SIF solutions for subsurface flaws near the free surfaces in flat plates were numerically investigated based on the finite element analyses. The flaws with aspect ratios a/ℓ = 0.0, 0.1, 0.2, 0.3, 0.4, and 0.5, the normalized ratios a/d = 0.0, 0.1, 0.2, 0.4, 0.6, and 0.8, and d/t = 0.01 and 0.10 were taken into account, where a is the half flaw depth, ℓ is the flaw length, d is the distance from the center of the subsurface flaw to the nearest free surface, and t is the wall thickness. Fourth-order polynomial stress distribution in the thickness direction was considered. In addition, the developed SIF solutions were incorporated into a Japanese probabilistic fracture mechanics (PFM) code, and PFM analyses were performed for a Japanese reactor pressure vessel (RPV) containing a subsurface flaw near the inner surface. The PFM analysis results indicate that the obtained SIF solutions are effective in engineering applications.
- 11 January 2017
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 139 (2) , 021407
Remaining Fatigue Lives of Similar Surface Flaws in Accordance With Combination Rules
When multiple flaws are detected in structural components, the remaining lives of the components are estimated by fatigue flaw growth calculations using combination rules in fitness-for-service (FFS) codes. Many FFS codes provide combination rules for multiple flaws; however, these rules differ significantly among the various codes. Fatigue flaw growths for two similar adjacent surface flaws in a flat plate subjected to a cyclic tensile stress were obtained by numerical calculations using these different combination rules. In addition, fatigue flaw growths taking into account the interaction effect between the two similar flaws were conducted by the extended finite-element method (X-FEM). The calculation results show that the fatigue lives calculated by the X-FEM are close to those obtained by the American Society of Mechanical Engineers (ASME) Code. Finally, it is noted that the combination rule provided by the ASME Code is appropriate for fatigue flaw growth calculations.
- 11 January 2017
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 139 (2) , 021407
Remaining Fatigue Lives of Similar Surface Flaws in Accordance With Combination Rules
When multiple flaws are detected in structural components, the remaining lives of the components are estimated by fatigue flaw growth calculations using combination rules in fitness-for-service (FFS) codes. Many FFS codes provide combination rules for multiple flaws; however, these rules differ significantly among the various codes. Fatigue flaw growths for two similar adjacent surface flaws in a flat plate subjected to a cyclic tensile stress were obtained by numerical calculations using these different combination rules. In addition, fatigue flaw growths taking into account the interaction effect between the two similar flaws were conducted by the extended finite-element method (X-FEM). The calculation results show that the fatigue lives calculated by the X-FEM are close to those obtained by the American Society of Mechanical Engineers (ASME) Code. Finally, it is noted that the combination rule provided by the ASME Code is appropriate for fatigue flaw growth calculations.
- Open Access
- 1 January 2017
- Published by American Institute of Mathematical Sciences (AIMS) in AIMS Materials Science
- Vol. 4 (2) , 439-451
Fatigue crack growth calculations for two adjacent surface cracks using combination rules in fitness-for-service codes
If multiple discrete cracks are detected in structural components, the combination rules provided in fitness-for-service (FFS) codes are employed to estimate the remaining lives of the components by fatigue crack growth (FCG) calculations. However, the specific criteria for combination rules prescribed by various FFS codes are different. This paper presents FCG calculations for two adjacent surface cracks in a flat plate using different combination criteria. Three different crack aspect ratios of 0.05, 0.15 and 0.5, and a nominal distance of 5 mm between the two cracks are investigated in the calculations. The results show that the FCG behaviors obtained by various codes are significantly different. In addition, the combination process of the two cracks is found to affect the crack shape development remarkably
- 1 January 2017
- Published by American Institute of Mathematical Sciences (AIMS) in AIMS Materials Science
- Vol. 4 (2) , 439-451
Open AccessFatigue crack growth calculations for two adjacent surface cracks using combination rules in fitness-for-service codes
If multiple discrete cracks are detected in structural components, the combination rules provided in fitness-for-service (FFS) codes are employed to estimate the remaining lives of the components by fatigue crack growth (FCG) calculations. However, the specific criteria for combination rules prescribed by various FFS codes are different. This paper presents FCG calculations for two adjacent surface cracks in a flat plate using different combination criteria. Three different crack aspect ratios of 0.05, 0.15 and 0.5, and a nominal distance of 5 mm between the two cracks are investigated in the calculations. The results show that the FCG behaviors obtained by various codes are significantly different. In addition, the combination process of the two cracks is found to affect the crack shape development remarkably