Evaluation and characterization of ammoniumpolyphosphate–pentaerythritol‐based systems for intumescent coatings
- 26 January 2007
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 104 (2) , 748-753
Abstract
Intumescent coatings are increasingly used as a method of passive fire protection on steel constructions. By forming a carbon network and releasing a blowing agent, the thin intumescent film swells 100‐fold at elevated temperatures. The highly insulating foam effectively prevents the load bearing steel from reaching its critical temperature at which it looses its mechanical properties and collapses. The role of the carbon donor in intumescent coatings has been studied. Comparison in temperature development, foaming ratios, and rheological behavior has been performed between formulations containing pentaerythritol (penta), di–penta, and tri–penta. A simulated fire test, in which the temperature development during intumescence was studied, showed that the formulations containing penta were considerably more efficient in keeping a low temperature throughout the process. A more rapid temperature development was displayed when using di–penta and tri–penta as the carbon donor. Rheometer tests indicate that penta formulations enter the intumescent process at a lower temperature and stays in it for a longer time than di–penta and tri–penta formulations. Furthermore, the crossover temperature and maximum phase angle are shifted towards higher temperatures by replacing penta with di–penta and with tri–penta in the formulations, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 748–753, 2007Keywords
This publication has 7 references indexed in Scilit:
- Thermoplastic resins for thin film intumescent coatings – towards a better understanding of their effect on intumescence efficiencyPolymer Degradation and Stability, 2005
- Recent Advances for Intumescent PolymersMacromolecular Materials and Engineering, 2004
- Thermal degradation and flame retardancy of ethylene-vinyl alcohol copolymer blended with ammonium polyphosphatePolymer Degradation and Stability, 2003
- TG-MS and TG-FTIR applied for an unambiguous thermal analysis of intumescent coatingsJournal of Thermal Analysis and Calorimetry, 2002
- XPS study of an intumescent coating application to the ammonium polyphosphate/pentaerythritol fire-retardant systemApplied Surface Science, 1994
- Can the gel point of a cross‐linking polymer be detected by the G′ – G″ crossover?Polymer Engineering & Science, 1987
- Study of the mechanism of intumescence in fire retardant polymers: Part VI—Mechanism of ester formation in ammonium polyphosphate-pentaerythritol mixturesPolymer Degradation and Stability, 1985