This study investigates the corrosion behaviour of T91 steel in static lead–bismuth eutectic (LBE) at 700 °C for 245 h under controlled oxidising conditions, with emphasis on nanoscale microstructural evolution and oxygen transport mechanisms. A combination of transmission Kikuchi diffraction (TKD), scanning/transmission electron microscopy (STEM/TEM), and atom probe tomography (APT) was employed to elucidate the corrosion mechanisms. The results show that corrosion is dominated by preferential grain boundary (GB) oxidation rather than dissolution-controlled processes typical of reducing environments. The oxidised grain boundaries (GBs) are decorated with Cr-rich oxides, which induce significant local Cr depletion and thus facilitate a ferrite phase transformation in the adjacent matrix. A Si-rich oxide layer is further observed at the outer edge of the oxidised GBs. A distinct multi-layered microstructural evolution was identified, comprising a fine recrystallised near-surface region, an intermediate coarsened recrystallised zone, and a transition region retaining lath martensite features. Intragranular oxidation, together with Cr- and Si-enriched oxide particles, indicates that oxygen penetrates beyond GBs. VN precipitates and dislocation structures were also found to act as additional fast diffusion pathways, facilitating local oxidation. Combined, these observations show that oxidation in T91 is governed by a hierarchical network of diffusion paths that accelerates oxygen ingress, microstructural degradation, and recrystallisation. GB oxidation propagates into the grain interior, causing Cr depletion and microstructural degradation, which may facilitate the continued advance of the LBE corrosion front.