Improving the rheology of linear low-density polyethylene (LLDPE) and processability of blown film extrusion using a new binary processing aid
- 18 April 2023
- journal article
- research article
- Published by Walter de Gruyter GmbH in International Polymer Processing
- Vol. 38 (3) , 310-321
Abstract
To improve the processability of LLDPE, a binary processing aid composed of polyethylene glycol (PEG) and hydrocalumite was designed. Hydrocalumite containing HPO3 2− was successfully synthesized with co-precipitation of calcium and aluminum hydroxide in the presence of phosphorous acid. Scanning Electron Microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, Thermogravimetric analyses (TGA) and Ion chromatography were utilized for the characterization of the synthesized hydrocalumite. SEM images showed the layered structure. Ion Chromatography demonstrated the molar ratio of Ca2+/Al3+ was 2:1.3 as an interlayer ion. The influence of PEG/hydrocalumite with the different ratios as a processing aid on the rheological properties of LLDPE was investigated by capillary rheometry. The results obtained showed that PEG/hydrocalumite processing aid with a ratio of 1:3 exhibited the best effect on the reduction of critical stress due to the best coverage of the extruder surface. The measurement of processing parameters in the blown film extruder revealed that hydrocalumite interacted with metallic oxides, created a slippery film layer on the die wall. This leads to a decrease in the die pressure and power consumption by 11% and 21%, respectively. SEM analysis confirmed a delay in Sharkskin instability at a higher shear rate.Keywords
This publication has 47 references indexed in Scilit:
- Multi-scale phenomena induced by fluoropolymer processing aids during the extrusion of linear-low density polyethyleneJournal of Non-Newtonian Fluid Mechanics, 2011
- Improvement of processing parameters by using processing aids during the linear low‐density polyethylene film blowing processJournal of Vinyl and Additive Technology, 2009
- Wall slip and spurt flow of polybutadieneJournal of Rheology, 2008
- Influence of poly(ethylene glycol)‐containing additives on extrusion of ultrahigh molecular weight polyethylene/polypropylene blendJournal of Applied Polymer Science, 2006
- Influence of type of compatibilizer on the rheological and mechanical behavior of LCP/TP blends under different stationary and nonstationary shear conditionsJournal of Applied Polymer Science, 2005
- The effect of die exit curvature, die surface roughness and a fluoropolymer additive on sharkskin extrusion instabilities in polyethylene processingJournal of Non-Newtonian Fluid Mechanics, 2005
- A simple way to suppress surface defects in the processing of polyethyleneJournal of Non-Newtonian Fluid Mechanics, 2004
- Role of processing aids in the extrusion of molten polymersJournal of Vinyl and Additive Technology, 2002
- Molecular character of sharkskin phenomenon in metallocene linear low density polyethylenesMacromolecular Chemistry and Physics, 1998
- Vibrational Spectra of Phosphite and Hypophosphite Anions, and the Characteristic Frequencies of PO3-- and PO2- GroupsJournal of the American Chemical Society, 1957