A 6-around-1 cable using high-temperature superconducting STAR ® wires for magnet applications
Authors:
- Nathaly CastanedaNCNathaly Castaneda
- Paolo FerracinPFPaolo Ferracin
- Cyrus FunkhouserCFCyrus Funkhouser
- Eduard GalstyanEGEduard Galstyan
- Hugh C HigleyHHHugh C Higley
- Goran MajkicGMGoran Majkic
- Hoang NguyenHNHoang Nguyen
- Soren O PrestemonSPSoren O Prestemon
- Venkat SelvamanickamVSVenkat Selvamanickam
- Huy TruongHTHuy Truong
- Xiaorong WangXWXiaorong Wang
- 2 February 2024
- journal article
- research article
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 37 (3) , 035009
Abstract
To generate a dipole field above 20 T, we need high-temperature superconductors, including REBa2Cu3O 7 − x (RE = rare earth, rebco) coated conductors. However, the optimal architecture of a high-current flexible rebco cable is not yet settled for high-field magnet applications. Here we report a 6-around-1 cable concept based on the high-temperature superconducting star ® wires. We made two cable samples. One had a single star ® wire and the other had six star ® wires. The cable with six star ® wires was 1.5 m long. It had a diameter of 5.7 mm and a pitch length of 52 mm. The critical current of the cable before bending was 1448 A at 77 K, retaining at least 77% of the total critical current from individual star ® wires. The cable had a low n value around 4.5. At a bend radius of 30 mm, the critical current and n value remained the same as before bending. The total resistance of electrical terminations was 61 nΩ at 77 K. The flexible and transposed 6-around-1 star ® cable can provide another route toward practical rebco conductors for high-field accelerator and fusion magnet applications.Keywords
Funding Information
- Small Business Innovation Research and Small Business Technology Transfer (DE-SC0021689)
- U.S. Magnet Development Program
- Office of Science (DEAC02-05CH11231)
This publication has 36 references indexed in Scilit:
- Current distribution monitoring enables quench and damage detection in superconducting fusion magnetsScientific Reports, 2022
- Non-twisted stacks of coated conductors for magnets: Analysis of inductance and AC lossesCryogenics, 2020
- Behavior of a high-temperature superconducting conductor on a round core cable at current ramp rates as high as 67.8 kA s−1in background fields of up to 19 TSuperconductor Science and Technology, 2016
- Test of 60 kA coated conductor cable prototypes for fusion magnetsSuperconductor Science and Technology, 2015
- High strength kiloampere Bi2Sr2CaCu2Oxcables for high-field magnet applicationsSuperconductor Science and Technology, 2015
- Effect of variations in terminal contact resistances on the current distribution in high-temperature superconducting cablesSuperconductor Science and Technology, 2015
- Modeling and simulation of termination resistances in superconducting cablesSuperconductor Science and Technology, 2014
- Investigation of a Rutherford cable using coated conductor Roebel cables as strandsSuperconductor Science and Technology, 2013
- HTS twisted stacked-tape cable conductorSuperconductor Science and Technology, 2011
- YBa2Cu3O7−δcoated conductor cabling for low ac-loss and high-field magnet applicationsSuperconductor Science and Technology, 2009