Performance of a neutron spectrometer based on a PIN diode

Authors:
  • GDG. D'Angelo
    G. D'Angelo
  • AFA. Fazzi
    A. Fazzi
  • APA. Foglio Para
    A. Foglio Para
  • APA. Pola
    A. Pola
  • LVL. Ventura
    L. Ventura
  • PZP. Zotto
    P. Zotto

Abstract
The neutron spectrometer discussed in this work consists of a PIN diode coupled with a polyethylene converter. Neutrons are detected through the energy deposited by recoil-protons in silicon. The maximum detectable energy is ∼6 MeV and is imposed by the thickness of the fully depleted layer (300 µm for the present device). The minimum detectable energy which can be assessed with pulse-shape discrimination (PSD) is ∼0.9 MeV. PSD is performed with a crossover method and setting the diode in the ‘reverse-injection’ configuration (i.e. with the N+ layer adjacent to the converter). This configuration provides longer collection times for the electron–hole pairs generated by the recoil-protons. The limited interval of detectable energies restricts the application of this spectrometer to low-energy neutron fields, such as the ones which can be produced at facilities hosting low-energy ion accelerators. The capacity to reproduce continuous neutron spectra was investigated by optimising the electronic chain for pulse-shape discrimination. In particular, the spectrometer was irradiated with neutrons that were generated by striking a thick beryllium target with protons of several energies and the measured spectra were compared with data taken from the literature.

This publication has 7 references indexed in Scilit: