In Situ Monitoring of Anodic Acidification Process Using 3D μ-XCT Method
Open Access
- 20 November 2024
- Vol. 17 (22) , 5662
Abstract
Debonding of the primary anode caused by anodic acidification is one of the major failure modes of the impressed current cathodic protection (ICCP) system in reinforced concrete structures. This study used 3D micro X-ray computed tomography (μ-XCT) to monitor the in situ evolution of the anodic acidification-affected zone. Samples were scanned after 0 to 40 days of the accelerated anodic acidification test. The anodic acidification-affected zone was identified in μ-XCT images using the gray level segmentation method. The total volume of this zone was measured using the 3D reconstruction method. It was found that detailed 3D information can be extracted using the 3D reconstruction method. The spatial heterogeneity was analyzed using this reconstructed volume information. The Faraday efficiency was calculated and found to increase after 20 days of operation. It was also found that the affected zone was proportional to the input electrical energy. The proposed model is useful for estimating the durability of an ICCP system.Keywords
Funding Information
- National Natural Science Foundation of China (52208277, 52208308, 2021A1515110804, 2021A1515110709, 2024A1515012610)
- Guangdong Basic and Applied Basic Research Foundation (52208277, 52208308, 2021A1515110804, 2021A1515110709, 2024A1515012610)
- Natural Science Foundation of Guangdong Province (52208277, 52208308, 2021A1515110804, 2021A1515110709, 2024A1515012610)
This publication has 17 references indexed in Scilit:
- Potential and current distribution across different layers of reinforcement in reinforced concrete cathodic protection system- A numerical studyConstruction and Building Materials, 2020
- Evaluation on the acidification damage of the external anode mortar induced by impressed current cathodic protectionConstruction and Building Materials, 2019
- Effectiveness of a dual-functional intervention method on the durability of reinforced concrete beams in marine environmentConstruction and Building Materials, 2019
- Identification of corrosion products and 3D distribution in reinforced concrete using X-ray micro computed tomographyConstruction and Building Materials, 2019
- Predicting degradation of the anode–concrete interface for impressed current cathodic protection in concreteConstruction and Building Materials, 2018
- Effect of the paste–anode interface under impressed current cathodic protection in concrete structuresMaterials and Corrosion, 2018
- Monitoring reinforcement corrosion and corrosion-induced cracking by X-ray microcomputed tomography methodCement and Concrete Research, 2017
- Light-weight cementitious conductive anode for impressed current cathodic protection of steel reinforced concrete applicationConstruction and Building Materials, 2014
- The selection and use of cathodic protection systems for the repair of reinforced concrete structuresConstruction and Building Materials, 2013
- Qualitative model of concrete acidification due to cathodic protectionMaterials and Corrosion, 2008