Zhijun Deng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhijun Deng has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Beibei Chen
School of Mechanical and Electrical Engineering, Guilin University of Electronic Technology, Guilin 541004, China
1 shared publication - Chaoqun Zeng
School of Automotive and Transportation Engineering, Shenzhen Polytechnic University, Shenzhen 518055, China
1 shared publication - Chen Zhao
Shenzhen Institute of Advanced Research, University of Electronic Science and Technology of China, Shenzhen, China
1 shared publication - Fei Wang
School of Undergraduate Education, Shenzhen Polytechnic University, Shenzhen 518055, China
1 shared publication - Guoyuan Wu
University of California, Riverside, Riverside, USA
1 shared publication Jianfeng Zhao
School of Automotive and Transportation Engineering, Shenzhen Polytechnic University, 7098 Liuxian Avenue, Shenzhen, Guangdong, China
1 shared publication
Latest Publications
- Open Access
Gradient Flow Field Designing to Enhance Mass and Heat Transfer for Air-Cooled Proton Exchange Membrane Fuel Cell Using the Modeling Frame
Structural optimization of the cathode flow field is a viable approach to homogenize multi-physical field distributions and boost the output of air-cooled proton exchange membrane fuel cells (PEMFCs). This work develops a three-dimensional non-isothermal model to systematically evaluate the performance of graded flow channel designs. The results indicate that the graded structure promotes fluid transport in the central zone, thereby improving oxygen distribution uniformity at the gas diffusion layer/catalyst layer (GDL/CL) interface. Compared to the traditional parallel flow channel (with an average oxygen mass fraction of 0.051% and a uniformity index of 0.779), this configuration yields a 6.4% increase in the average oxygen mass fraction and a 0.96% enhancement in distribution uniformity. However, increased gradient flow reduces the flow velocity within the channels and raises the operating temperature, posing challenges for water and thermal management. The curved channel design, featuring longer channels at the ends and shorter channels in the center, compensates for the uneven air supply caused by the fan, thus balancing the flow distribution. Among the tested configurations, the 10° curved structure exhibits optimal performance, achieving the best compromise between gas distribution and liquid water removal. It effectively promotes oxygen diffusion and uniform water distribution, significantly alleviating mass transfer polarization and yielding a more uniform interface temperature distribution due to evaporative cooling. Both excessively small and large curvature angles lead to performance degradation, primarily due to inadequate water removal and flow separation, accompanied by excessive pressure drop, respectively. In contrast, the 10° curved channel strikes an optimal balance, offering significant advantages in overall cell performance and water–thermal management, which provides critical guidance for optimizing PEMFC flow field designs.
Open AccessGradient Flow Field Designing to Enhance Mass and Heat Transfer for Air-Cooled Proton Exchange Membrane Fuel Cell Using the Modeling Frame
Structural optimization of the cathode flow field is a viable approach to homogenize multi-physical field distributions and boost the output of air-cooled proton exchange membrane fuel cells (PEMFCs). This work develops a three-dimensional non-isothermal model to systematically evaluate the performance of graded flow channel designs. The results indicate that the graded structure promotes fluid transport in the central zone, thereby improving oxygen distribution uniformity at the gas diffusion layer/catalyst layer (GDL/CL) interface. Compared to the traditional parallel flow channel (with an average oxygen mass fraction of 0.051% and a uniformity index of 0.779), this configuration yields a 6.4% increase in the average oxygen mass fraction and a 0.96% enhancement in distribution uniformity. However, increased gradient flow reduces the flow velocity within the channels and raises the operating temperature, posing challenges for water and thermal management. The curved channel design, featuring longer channels at the ends and shorter channels in the center, compensates for the uneven air supply caused by the fan, thus balancing the flow distribution. Among the tested configurations, the 10° curved structure exhibits optimal performance, achieving the best compromise between gas distribution and liquid water removal. It effectively promotes oxygen diffusion and uniform water distribution, significantly alleviating mass transfer polarization and yielding a more uniform interface temperature distribution due to evaporative cooling. Both excessively small and large curvature angles lead to performance degradation, primarily due to inadequate water removal and flow separation, accompanied by excessive pressure drop, respectively. In contrast, the 10° curved channel strikes an optimal balance, offering significant advantages in overall cell performance and water–thermal management, which provides critical guidance for optimizing PEMFC flow field designs.
- Open Access
In Situ Monitoring of Anodic Acidification Process Using 3D μ-XCT Method
Debonding of the primary anode caused by anodic acidification is one of the major failure modes of the impressed current cathodic protection (ICCP) system in reinforced concrete structures. This study used 3D micro X-ray computed tomography (μ-XCT) to monitor the in situ evolution of the anodic acidification-affected zone. Samples were scanned after 0 to 40 days of the accelerated anodic acidification test. The anodic acidification-affected zone was identified in μ-XCT images using the gray level segmentation method. The total volume of this zone was measured using the 3D reconstruction method. It was found that detailed 3D information can be extracted using the 3D reconstruction method. The spatial heterogeneity was analyzed using this reconstructed volume information. The Faraday efficiency was calculated and found to increase after 20 days of operation. It was also found that the affected zone was proportional to the input electrical energy. The proposed model is useful for estimating the durability of an ICCP system.
Open AccessIn Situ Monitoring of Anodic Acidification Process Using 3D μ-XCT Method
Debonding of the primary anode caused by anodic acidification is one of the major failure modes of the impressed current cathodic protection (ICCP) system in reinforced concrete structures. This study used 3D micro X-ray computed tomography (μ-XCT) to monitor the in situ evolution of the anodic acidification-affected zone. Samples were scanned after 0 to 40 days of the accelerated anodic acidification test. The anodic acidification-affected zone was identified in μ-XCT images using the gray level segmentation method. The total volume of this zone was measured using the 3D reconstruction method. It was found that detailed 3D information can be extracted using the 3D reconstruction method. The spatial heterogeneity was analyzed using this reconstructed volume information. The Faraday efficiency was calculated and found to increase after 20 days of operation. It was also found that the affected zone was proportional to the input electrical energy. The proposed model is useful for estimating the durability of an ICCP system.