Joining technology of carbon fiber reinforced polymer (CFRP) using copper wire and adhesive
Authors:
- 27 May 2025
- journal article
- Published by IOP Publishing in Functional Composites and Structures
- Vol. 7 (2) , 025004
Abstract
This paper investigates a novel approach for joining carbon fiber reinforced polymer (CFRP) composites, aiming to mitigate fiber continuity disruptions and stress concentrations typically associated with conventional mechanical joining methods such as bolts and rivets. Specifically, the study examines the effects of copper wires (diameter: 0.25 mm), arranged horizontally and vertically on the CFRP surface, on adhesive bonding performance under curing conditions of 170 °C for 15 min. Single-lap shear tests and optical microscopy analyses were conducted to evaluate the influence of wire orientation and curing conditions on interfacial strength, adhesive mechanisms, and failure modes. Vertically aligned copper wires achieved the highest average shear strength of 20 MPa, representing a maximum load increase of 439.74% compared to adhesive-only joints. Surpassing horizontal and no-wire samples. This improvement is attributed to enhanced adhesive infiltration and mechanical interlocking at the interface, leading to more cohesive failure within the adhesive layer. The results demonstrate that copper wire orientation significantly impacts adhesive penetration, interface quality, and fracture characteristics. Furthermore, optimized curing conditions improve adhesive stability and reduce interfacial degradation, reinforcing the tendency toward cohesive failure. This study provides quantitative and practical insights into copper wire-reinforced bonding mechanisms, facilitating advancements in composite electronics and structural applications.Keywords
Funding Information
- Korea Institute for Advancement of Technology (RS-2024-00409639)
This publication has 28 references indexed in Scilit:
- Mechanical performance evaluation of optimal hybrid composite fabricated with glass and carbon fibers and thermoplastic polypropylene matrix or fencing sports athletesInternational Communications in Heat and Mass Transfer, 2024
- A review of modification methods, joints and self-healing methods of adhesive for aerospaceScience Progress, 2024
- Towards sustainable structural composites: A review on the recycling of continuous-fiber-reinforced thermoplasticsAdvanced Industrial and Engineering Polymer Research, 2021
- Development of multifunctional hybrid metal/carbon composite structuresComposite Structures, 2019
- Design optimization and experimental validation of a novel wedge-shaped bond anchorage system for prestressed CFRP platesPolymer Testing, 2019
- Fabrication and Experimental Analysis of Copper Wire Embedded with GFRP CompositesMaterials Today: Proceedings, 2018
- A Review on the Mechanical Modeling of Composite Manufacturing ProcessesArchives of Computational Methods in Engineering, 2016
- Temperature effect during humid ageing on interfaces of glass and carbon fibers reinforced epoxy compositesJournal of Colloid and Interface Science, 2006
- Fibre reinforced composites in aircraft constructionProgress in Aerospace Sciences, 2005
- Substrate constraint and adhesive thickness effects on fracture toughness of adhesive jointsJournal of Adhesion Science and Technology, 2004