Effects of arrival rate and gas pressure on the chemical bonding and composition in titanium nitride films prepared on Si(100) substrates by ion beam and vapor deposition
- 15 December 2004
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 23 (1) , 137-141
Abstract
Thin titanium nitride films were prepared at room temperature by titanium metal vapor deposition on silicon substrates with simultaneous irradiation by a 2 keV nitrogen ion beam. Arrival rate ratios, ARR( /Ti), defined as the ratio of the flux of incident atomic nitrogen particles in the ion beam relative to the flux of titanium atoms transported to the substrate, ranged from 0.17 to 2.5. The gas pressure in the vacuum chamber was maintained at or during the deposition and irradiation process. Analyses of Ti x-ray photoelectron spectroscopy spectra indicated the presence of metal , nitride TiN, oxide , oxynitride , and carbide TiC phases. The phase was observed exclusively and predominantly in the films prepared at and , 0.21, and 0.28, and the TiN phase is major in the others, as confirmed by the x-ray diffractometry analyses. The chemical composition ratio /Ti in the films prepared at increased linearly with increasing ARR( /Ti) up to and tended to be constant with further increase in ARR( /Ti), while this ratio in the films prepared at was almost constant independently of ARR( /Ti), similar to the constant value observed at and higher ARR( /Ti). This dependence may be understood by comparison with the flux of evaporated titanium atoms, the flux of nitrogen in the beam, and the impingement rate of nitrogen gas in the vacuum chamber, evaluated through the kinetic theory of gases. On the other hand, titanium is known to be one of the chemically active materials which form stable compounds with gases by chemisorption, this fact leading to considerable incorporation of contaminant oxygen and carbon in the depositing titanium film.
Keywords
This publication has 20 references indexed in Scilit:
- Texture of IBAD TiN films as a function of ion-beam intensity and angular incidenceSurface and Coatings Technology, 1996
- X-Ray Photoelectron Spectroscopy Studies of Titanium Nitride Barrier Metals Prepared by Low-Pressure Metalorganic Chemical Vapor DepositionJapanese Journal of Applied Physics, 1995
- Titanium nitride oxidation chemistry: An x-ray photoelectron spectroscopy studyJournal of Applied Physics, 1992
- Crystalline orientation control by the IVD methodNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1989
- Transmission electron microscopy studies of brown and golden titanium nitride thin films as diffusion barriers in very large scale integrated circuitsJournal of Vacuum Science & Technology A, 1988
- Characterization of a 3 cm Kaufman ion source with nitrogen feed gasVacuum, 1986
- The microstructure of reactively sputtered Ti-N films containing the Ti2N phaseActa Metallurgica, 1985
- Mechanisms of reactive sputtering of titanium nitride and titanium carbide II: Morphology and structureThin Solid Films, 1983
- Enhanced ARE apparatus and TiN synthesisJournal of Vacuum Science and Technology, 1979
- Many-electron singularity in X-ray photoemission and X-ray line spectra from metalsJournal of Physics C: Solid State Physics, 1970