Analysis of Impact of Air-Gap Length and Superconducting Coil-to-Stator Distance in Superconducting Vernier Machines
Open Access
- 16 April 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 59454-59465
Abstract
This paper investigates the influence of air-gap length (lag) and the distance between the superconducting coil and the stator (lsc) on the electromagnetic performance of a conventional Superconducting Machine (SCM) and a Superconducting Vernier Machine (SCVM). Both machines are partially superconducting (only rotor field windings are superconducting) and use iron stator and iron rotor (ISIR) topologies. They are designed for offshore wind power applications at a 10 MW power level. Key performance metrics—including cogging torque, induced EMF, air-gap flux density, average torque, torque ripple, efficiency, power factor and inductance are compared with respect to variations in lag and lsc. The finite element results show that the SCVM’s modulation effect is influenced by both lag and lsc. This modulation effect leads to increased average torque, reduced cogging torque and torque ripple compared with the conventional SCM. In contrast, for the conventional SCM, the electromagnetic performance is mainly influenced by lag. Moreover, the study indicates that the modulation effect of lag on SCVM is not only due to the fundamental component (BPr) but also other harmonics components, whereas the modulation effect of lsc is only due to BPr.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EPSRC) and Natural Environment Research Council (NERC) Centre for Doctoral Training in Offshore Wind Energy and the Environment (EP/S023763/1)
This publication has 26 references indexed in Scilit:
- 10 MW Direct-Drive Superconducting Vernier Machines for Offshore Wind Power Application2025
- System-Level Investigation of Multi-MW Direct-Drive Wind Power PM Vernier GeneratorsIEEE Access, 2020
- Effect of Airgap Length on Electromagnetic Performance of Surface Mounted Permanent Magnet Vemier Machine2020
- Reliability prediction of an offshore wind turbine gearboxRenewable Energy, 2019
- Permanent magnet vernier machine: a reviewIET Electric Power Applications, 2019
- Key challenges and prospects for large wind turbinesRenewable and Sustainable Energy Reviews, 2016
- Design and analysis of a novel vernier reluctance fully superconducting synchronous generator with LTS windings for wind power generation2015
- Comparison of stator HTS vernier machines having different stator and rotor pole numbers2015
- Influence of design parameters on cogging torque in permanent magnet machinesIEEE Transactions on Energy Conversion, 2000
- Generic torque-maximizing design methodology of surface permanent-magnet vernier machineIEEE Transactions on Industry Applications, 2000