Numerical Analysis of Wick-Type Two-Phase Mechanically Pumped Fluid Loop for Thermal Control of Electric Aircraft Motors
Open Access
Abstract
The development of thermal control systems has become an important issue in next-generation electric aircraft design due to the increase in heat exhausted with electrification. In this paper, a wick-type two-phase mechanically pumped fluid loop system for future electric aircraft was proposed through the investigation of current two-phase flow cooling technology. Taking the experimental electric aircraft X-57 as an example, a wick-type two-phase mechanically pumped fluid loop with four evaporators for transporting 12 kW of waste heat within an 80 °C temperature limit was proposed and its feasibility was confirmed. A numerical model was constructed and validated to predict the operating characteristics of a two-phase mechanically pumped fluid loop. The optimal pump outputs under-even and uneven heat load conditions and was investigated for the first time by considering the vapor-liquid separation conditions in each flow path and the power consumption of the pump. Under the optimal pump output condition, the operating characteristics of the wick-type two-phase mechanically pumped fluid loop system were calculated. The calculation results indicate that the proposed wick-type two-phase mechanically pumped fluid loop is suitable as the thermal control system for an X-57 electric aircraft motor, as the calculation results satisfied the operational requirements of the motor.Keywords
This publication has 29 references indexed in Scilit:
- Mathematical modeling of multiple evaporators/condensers loop heat pipe operation with flow regulator under various operating conditionsJournal of Thermal Science and Technology, 2015
- Experimental investigation of pump-assisted capillary phase change loopApplied Thermal Engineering, 2014
- Challenges and opportunities for electric aircraft thermal managementAircraft Engineering and Aerospace Technology, 2014
- Experimental analysis of pump-assisted and capillary-driven dual-evaporators two-phase cooling loopApplied Thermal Engineering, 2012
- Effect of Operational Conditions on Cooling Performance of Pump-Assisted and Capillary-Driven Two-Phase LoopJournal of Thermophysics and Heat Transfer, 2011
- Active coolers based on copper–water LHPs for desktop PCApplied Thermal Engineering, 2009
- Mathematical modeling of steady-state operation of a loop heat pipeApplied Thermal Engineering, 2009
- Performance Evaluation of a Pump-Assisted, Capillary Two-Phase Cooling LoopJournal of Thermal Science and Engineering Applications, 2009
- Loop heat pipesApplied Thermal Engineering, 2005
- A simple friction pressure drop correlation for two-phase flow in pipesChemical Engineering and Processing - Process Intensification, 1986