Investigation of the Influence of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of 18Ni-300 Maraging Steel
Authors:
- 18 March 2022
- journal article
- research article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 913, 259-264
Abstract
The influence of SLM process parameters (i.e. laser power, scanning speed, and hatch spacing) on the microstructure and mechanical properties of 3D printed 18Ni-300 maraging steel was investigated. In experiments on 3D printed scan tracks, better fusion of powder material was achieved in parameter configurations with higher linear energy density (i.e. LED ≥ 375.00 J m-1). A higher LED indicates that more laser energy is transferred to the powder material, resulting in complete melting of the powder and the creation of a microstructure with less defects. In experiments on fully built samples, higher relative density was achieved when the hatch spacing was increased or the scanning speed was decreased. Fully built samples produced using parameter configuration B-2 (300 W, 700 mm s-1, 0.10 mm) have higher relative density and ultimate tensile strength as compared to the other parameter configurations.Keywords
This publication has 8 references indexed in Scilit:
- Microstructural heterogeneity and mechanical anisotropy of 18Ni-330 maraging steel fabricated by selective laser melting: The effect of build orientation and heightJournal of Materials Research, 2020
- Experimental analysis of conformal cooling in SLM produced injection moulds: Effects on process and product qualityAIP Conference Proceedings, 2019
- Effect of laser scanning strategies on texture, physical and mechanical properties of laser sintered maraging steelMaterials Science and Engineering: A, 2018
- Selective laser melting of maraging steel: mechanical properties development and its application in moldRapid Prototyping Journal, 2018
- The achievable mechanical properties of SLM produced Maraging Steel 300 componentsRapid Prototyping Journal, 2016
- Review of selective laser melting: Materials and applicationsApplied Physics Reviews, 2015
- Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steelPhysics Procedia, 2011
- Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methodsMaterials & Design (1980-2015), 2009