Selective laser melting of maraging steel: mechanical properties development and its application in mold
Authors:
- Yuchao BaiYuchao Bai
- Yongqiang YangYYYongqiang Yang
- Zefeng XiaoZXZefeng Xiao
- Di WangDWDi Wang
- 9 April 2018
- journal article
- research article
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 24 (3) , 623-629
Abstract
Purpose: This paper aims to verify whether selective laser melting (SLM) could be used for manufacturing mold with conformal cooling channels and determine whether the mechanical properties development of SLM manufacturing maraging steel mold would be beneficial to improve the quality of mold. Design/methodology/approach: A series of block specimens and cylindrical tensile specimens are manufactured by SLM, and then are heat treated by solution treatment (ST) and solution treatment + aging treatment (ST + AT), respectively. The development of microstructure, microhardness and tensile strength of specimens is investigated. Then, a mold with conformal cooling channels is designed and manufactured by SLM and machined after ST with microhardness decreasing. Findings: The morphology of microstructure varies widely under different heat treatment. The microhardness and tensile strength decrease after ST with cellular structure broken, which is conducive to mechanical finishing for mold to improve surface accuracy. After that, the hardness and strength of the mold increase significantly by AT with the precipitation of Ni3Mo, Fe2Mo and Ni3Ti particles. The maraging steel mold with conformal cooling channels can be manufactured by SLM successfully. And the surface accuracy of mold could be improved easily by machining. Originality/value: Compared with the traditional mold with simple cooling channels, the mold with conformal cooling channels can be manufactured by SLM directly. The hardness of maraging steel mold manufactured by SLM can be reduced through ST, which is conducive to mechanical finishing for overcoming the defect of low precision of SLM directly manufacturing mold. This provides a new way for manufacturing mold of high quality.Keywords
This publication has 23 references indexed in Scilit:
- Research on the fabricating quality optimization of the overhanging surface in SLM processThe International Journal of Advanced Manufacturing Technology, 2012
- Selective Laser MeltingPhotonicsViews, 2012
- Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steelPhysics Procedia, 2011
- Microstructure, hardness and residual stress distribution in maraging steel gas tungsten arc weldmentsScience and Technology of Welding and Joining, 2008
- Fundamentals of Selective Laser Melting of alloyed steel powdersCIRP Annals, 2006
- Effects of austenite reversion during overageing on the mechanical properties of 18 Ni (350) maraging steelMaterials Science and Engineering: A, 2005
- Modeling of precipitation hardening during the aging and overaging of 18Ni–Co–Mo–Ti maraging 300 steelJournal of Alloys and Compounds, 2005
- Mechanical properties of a Cr–Ni–Mo–Al–Ti maraging steel in the process of martensitic transformationMaterials Science and Engineering: A, 2001
- Martensite in steel: strength and structureMaterials Science and Engineering: A, 1999
- Precipitation Hardening in 350 Grade Maraging SteelMetallurgical Transactions A, 1993