Computational Methodology to Determine Fluid Related Parameters of Non Regular Three-Dimensional Scaffolds
Authors:
- Víctor Andrés Acosta SantamaríaVSVíctor Andrés Acosta Santamaría
- M MalvèMMM Malvè
- A DuizaboADA Duizabo
- A Mena TobarATA Mena Tobar
- G Gallego FerrerGFG Gallego Ferrer
- J M García AznarJ M García Aznar
- M DoblaréMDM Doblaré
- I OchoaIOI Ochoa
- 27 June 2013
- journal article
- research article
- Published by Springer Nature in Annals of Biomedical Engineering
- Vol. 41 (11) , 2367-2380
Abstract
The application of three-dimensional (3D) biomaterials to facilitate the adhesion, proliferation, and differentiation of cells has been widely studied for tissue engineering purposes. The fabrication methods used to improve the mechanical response of the scaffold produce complex and non regular structures. Apart from the mechanical aspect, the fluid behavior in the inner part of the scaffold should also be considered. Parameters such as permeability (k) or wall shear stress (WSS) are important aspects in the provision of nutrients, the removal of metabolic waste products or the mechanically-induced differentiation of cells attached in the trabecular network of the scaffolds. Experimental measurements of these parameters are not available in all labs. However, fluid parameters should be known prior to other types of experiments. The present work compares an experimental study with a computational fluid dynamics (CFD) methodology to determine the related fluid parameters (k and WSS) of complex non regular poly(l-lactic acid) scaffolds based only on the treatment of microphotographic images obtained with a microCT (μCT). The CFD analysis shows similar tendencies and results with low relative difference compared to those of the experimental study, for high flow rates. For low flow rates the accuracy of this prediction reduces. The correlation between the computational and experimental results validates the robustness of the proposed methodology.Keywords
This publication has 38 references indexed in Scilit:
- Biomimetic hydroxyapatite coating on pore walls improves osteointegration of poly(L‐lactic acid) scaffoldsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2012
- Prediction of permeability of regular scaffolds for skeletal tissue engineering: A combined computational and experimental studyActa Biomaterialia, 2012
- Chondrogenic differentiation of human bone marrow mesenchymal stem cells in chitosan-based scaffolds using a flow-perfusion bioreactorJournal of Tissue Engineering and Regenerative Medicine, 2010
- Microcomputed tomography and microfinite element modeling for evaluating polymer scaffolds architecture and their mechanical propertiesJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2009
- On scaffold designing for bone regeneration: A computational multiscale approachActa Biomaterialia, 2009
- Mechanical and flow characterization of Sponceram® carriers: Evaluation by homogenization theory and experimental validationJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2008
- Influence of pore size on tensile strength, permeability and porosity of hyaluronan-collagen scaffoldsJournal of Materials Science: Materials in Medicine, 2008
- Potential Effect of Geometry on Wall Shear Stress Distribution Across Scaffold SurfacesAnnals of Biomedical Engineering, 2007
- State of the art and future directions of scaffold-based bone engineering from a biomaterials perspectiveJournal of Tissue Engineering and Regenerative Medicine, 2007
- Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition techniqueBiomaterials, 2004