PCSEL Performance of Type-I InGaAsSb Double-QWs Laser Structure Prepared by MBE
Open Access
Abstract
This paper discusses the issue of controlling the epitaxial growth of mixed group V alloys to form a type-I InGaAsSb/AlGaAsSb double quantum wells (QWs) structure. We also discuss the run-to-run reproducibility of lattice-matched AlGaAsSb alloys and strained In0.35Ga0.65As0.095Sb0.905 in terms of growth parameters (V/III ratio, Sb2/As2 ratio). Molecular beam epitaxy (MBE) was used to grow two type-I InGaAsSb double-QWs laser structures differing only in the composition of the bottom cladding layer: Al0.85Ga0.15As0.072Sb0.928 (sample A) and Al0.5Ga0.5As0.043Sb0.957 (sample B). Both samples were respectively used in the fabrication of photonic crystal surface-emitting lasers (PCSELs). Sample A presented surface lasing action from circular as well as triangular photonic crystals. Sample B did not present surface lasing due to the deterioration of the active region during the growth of the upper cladding. Our findings underline the importance of temperature in the epitaxial formation of AlxGa1−xAsySb1−y in terms of lasing performance.Keywords
This publication has 18 references indexed in Scilit:
- Room-temperature 3.73 µm GaSb-based type-I quantum-well lasers with quinternary barriersSemiconductor Science and Technology, 2012
- How to recognize lasingNature Photonics, 2009
- Low-Threshold Strained Quantum-Well GaSb-Based Lasers Emitting in the 2.5- to 2.7-$\mu$m Wavelength RangeIEEE Photonics Technology Letters, 2009
- GaN Photonic-Crystal Surface-Emitting Laser at Blue-Violet WavelengthsScience, 2008
- Principal energy band gaps of the quaternary alloy AlxGa1−xSbyAs1−ySolid State Communications, 2005
- High temperature continuous wave operation of Sb-based vertical external cavity surface emitting laser near 2.3μmJournal of Crystal Growth, 2004
- 2 μm GaInAsSb/AlGaAsSb midinfrared laser grown digitally on GaSb by modulated-molecular beam epitaxyJournal of Applied Physics, 2000
- Band gaps and refractive indices of AlGaAsSb, GaInAsSb, and InPAsSb: Key properties for a variety of the 2–4-μm optoelectronic device applicationsJournal of Applied Physics, 1987
- Room-temperature operation of InGaAsSb/AlGaSb double heterostructure lasers near 2.2 μm prepared by molecular beam epitaxyApplied Physics Letters, 1986
- Multicomponent solid-solution semiconductor lasersIEEE Journal of Quantum Electronics, 1977