Mechanical properties of SiC f /SiC composites with alternating PyC/BN multilayer interfaces
Authors:
- 24 June 2017
- journal article
- research article
- Published by SAGE Publications in Advances in Applied Ceramics: Structural, Functional and Bioceramics
- Vol. 116 (7) , 392-399
Abstract
Alternating pyrolytic carbon/boron nitride (PyC/BN)n multilayer coatings were applied to the KD–II silicon carbide (SiC) fibres by chemical vapour deposition technique to fabricate continuous SiC fibre-reinforced SiC matrix (SiCf/SiC) composites with improved flexural strength and fracture toughness. Three-dimensional SiCf/SiC composites with different interfaces were fabricated by polymer infiltration and pyrolysis process. The microstructure of the coating was characterised by scanning electron microscopy, X–photoelectron spectroscopy and transmission electron microscopy. The interfacial shear strength was determined by the single-fibre push-out test. Single-edge notched beam (SENB) test and three-point bending test were used to evaluate the influence of multilayer interfaces on the mechanical properties of SiCf/SiC composites. The results indicated that the (PyC/BN)n multilayer interface led to optimum flexural strength and fracture toughness of 566.0 MPa and 21.5 MPa m1/2, respectively, thus the fracture toughness of the composites was significantly improved.Keywords
Funding Information
- National Natural Science Foundation of China (51372274, 91426304)
This publication has 31 references indexed in Scilit:
- Fibre-reinforced multifunctional SiC matrix composite materialsInternational Materials Reviews, 2017
- Interfacial debonding and slipping of carbon fiber-reinforced ceramic-matrix composites under two-stage cyclic loadingComposite Interfaces, 2016
- Relationships between the accumulative damage and dielectric properties of woven BN-coated Hi-Nicalon™ SiC fibre-reinforced SiC matrix compositesCeramics International, 2015
- Rare-earth nitrate additives for the sintering of silicon carbideJournal of the European Ceramic Society, 2013
- Influence of SiC coating thickness on mechanical properties of SiCf/SiC compositeJournal of Nuclear Materials, 2013
- Mechanical properties of 3D KD-I SiCf/SiC composites with engineered fibre–matrix interfacesComposites Science and Technology, 2011
- Effects of the single layer CVD SiC interphases on the mechanical properties of the SiCf/SiC composites fabricated by PIP processCeramics International, 2010
- Joining of machined SiC/SiC composites for thermonuclear fusion reactorsJournal of Nuclear Materials, 2008
- Influence of pyrolytic carbon interface thickness on microstructure and mechanical properties of SiC/SiC composites by NITE processComposites Science and Technology, 2008
- Fiber‐Matrix Bond‐Strength Characterization of Silicon Carbide‐Silicon Carbide MaterialsJournal of the American Ceramic Society, 1990