Mechanical Interlocking Approaches to the Prediction of Mechanical and Tribological Behavior of Natural Fiber-Reinforced Polymer Hybrid Nanocomposites or Automotive Applications
Open Access
- 2 August 2023
- journal article
- retracted article
- Published by Wiley in Advances in Polymer Technology
- Vol. 2023, 1-8
Abstract
Polymer matrix composites synthesized with biodegradable natural fiber obtain a predominant structure with specific properties at a low-processing cost. The unique characteristics of polymer matrix composites were magnetized in automotive parts like top roof, panel, and seat frame applications. American Society for Testing and Materials (ASTM) G99 analyzed the wear characteristics of synthesized composites through a pin-on-disc wear tester with an EN32 steel disc. The epoxy hybrid composites have been synthesized via a conventional casting process assisted with a mechanical interlock technique to obtain a predominant structure with specific properties at a low-processing cost. The advanced composite contained different jute weights (50, 25, 50, and 75g) and coconut coir (50, 70, 45, and 20g) hybridized with graphite particles. ASTM D2240, D638, and D790 standards evaluated the fabricated composite hardness, tensile, and flexural strength. The Sample 4 hybrid composite found maximum hardness, tensile, and flexural strength of 27.410.99Hv, 51.691.01MPa, and 55.940.78MPa, respectively. Sample 4 offered good wear resistance of their volumetric wear rate of 0.043cm3 on 40N average load at 0.25m/s sliding speed. It is increased by 12 compared to Sample 1 at 40N applied load on 2.5m/s sliding speed.Keywords
This publication has 35 references indexed in Scilit:
- A review of the recent developments in biocomposites based on natural fibres and their application perspectivesComposites Part A: Applied Science and Manufacturing, 2015
- Investigation on mechanical and thermo‐mechanical properties of granite powder filled treated jute fiber reinforced epoxy compositePolymer Composites, 2015
- Mechanical properties of kenaf fibre reinforced polymer composite: A reviewConstruction and Building Materials, 2015
- A Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid CompositesPolymers, 2014
- Evaluation of Mechanical Properties of Coconut Coir Fiber Reinforced Polymer Matrix CompositesJournal of Nano Research, 2013
- Jute fiber reinforced epoxy composites and comparison with the glass and neat epoxy compositesJournal of Composite Materials, 2013
- Critical review of recent publications on use of natural composites in infrastructureComposites Part A: Applied Science and Manufacturing, 2012
- Biofibres and biocompositesCarbohydrate Polymers, 2008
- Natural fibers and their composites2008
- Sisal fibre and its composites: a review of recent developmentsComposites Science and Technology, 2000