Priya Chathapuram Balasubramanian
Research Subjects
Priya Chathapuram Balasubramanian has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Elangomathavan Ramaraj
Department of Biology, College of Natural and Computational sciences, Debre Tabor University, Amhara region, Ethiopia
2 shared publications A. Nagadeepan
Department of Mechanical EngineeringSRM TRP Engineering CollegeTrichy621105 Tamil NaduIndia
1 shared publication- Abhishek Ghosh
Department of Applied Science, University of Quebec at Chicoutimi, Saguenay, Canada
1 shared publication - Alagarsamy Senthilkumar
Department of mechanical engineering, Saveetha Engineering college, Thandalam, Chennai, India
1 shared publication - Amit Agrawal
Institute of Business Management, GLA University, Mathura, India
1 shared publication - Asiful Hossain Seikh
Department of Mechanical Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia
1 shared publication
Latest Publications
- 12 March 2024
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 56 (5) , 1-12
Features of nano TiO2 on metallographic and optical performance of polyvinyl alcohol nanocomposite film
- 12 March 2024
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 56 (5) , 1-12
Features of nano TiO2 on metallographic and optical performance of polyvinyl alcohol nanocomposite film
- RetractedOpen Access
- 2 August 2023
- Published by Wiley in Advances in Polymer Technology
- Vol. 2023, 1-8
Mechanical Interlocking Approaches to the Prediction of Mechanical and Tribological Behavior of Natural Fiber-Reinforced Polymer Hybrid Nanocomposites or Automotive Applications
Polymer matrix composites synthesized with biodegradable natural fiber obtain a predominant structure with specific properties at a low-processing cost. The unique characteristics of polymer matrix composites were magnetized in automotive parts like top roof, panel, and seat frame applications. American Society for Testing and Materials (ASTM) G99 analyzed the wear characteristics of synthesized composites through a pin-on-disc wear tester with an EN32 steel disc. The epoxy hybrid composites have been synthesized via a conventional casting process assisted with a mechanical interlock technique to obtain a predominant structure with specific properties at a low-processing cost. The advanced composite contained different jute weights (50, 25, 50, and 75g) and coconut coir (50, 70, 45, and 20g) hybridized with graphite particles. ASTM D2240, D638, and D790 standards evaluated the fabricated composite hardness, tensile, and flexural strength. The Sample 4 hybrid composite found maximum hardness, tensile, and flexural strength of 27.410.99Hv, 51.691.01MPa, and 55.940.78MPa, respectively. Sample 4 offered good wear resistance of their volumetric wear rate of 0.043cm3 on 40N average load at 0.25m/s sliding speed. It is increased by 12 compared to Sample 1 at 40N applied load on 2.5m/s sliding speed.
- 2 August 2023
- Published by Wiley in Advances in Polymer Technology
- Vol. 2023, 1-8
RetractedOpen AccessMechanical Interlocking Approaches to the Prediction of Mechanical and Tribological Behavior of Natural Fiber-Reinforced Polymer Hybrid Nanocomposites or Automotive Applications
Polymer matrix composites synthesized with biodegradable natural fiber obtain a predominant structure with specific properties at a low-processing cost. The unique characteristics of polymer matrix composites were magnetized in automotive parts like top roof, panel, and seat frame applications. American Society for Testing and Materials (ASTM) G99 analyzed the wear characteristics of synthesized composites through a pin-on-disc wear tester with an EN32 steel disc. The epoxy hybrid composites have been synthesized via a conventional casting process assisted with a mechanical interlock technique to obtain a predominant structure with specific properties at a low-processing cost. The advanced composite contained different jute weights (50, 25, 50, and 75g) and coconut coir (50, 70, 45, and 20g) hybridized with graphite particles. ASTM D2240, D638, and D790 standards evaluated the fabricated composite hardness, tensile, and flexural strength. The Sample 4 hybrid composite found maximum hardness, tensile, and flexural strength of 27.410.99Hv, 51.691.01MPa, and 55.940.78MPa, respectively. Sample 4 offered good wear resistance of their volumetric wear rate of 0.043cm3 on 40N average load at 0.25m/s sliding speed. It is increased by 12 compared to Sample 1 at 40N applied load on 2.5m/s sliding speed.
- Open Access
- 1 January 2023
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 2023
Thermal Adsorption and Corrosion Characteristic Study of Copper Hybrid Nanocomposite Synthesized by Powder Metallurgy Route
Novel constitutions of ceramic bond the new opportunity of engineering materials via solid-state process attaining enhanced material characteristics to overcome the drawback of conventional materials used in aquatic applications. The copper-based materials have great potential to explore high corrosion resistance and good thermal performance in the above applications. The main objectives of this research are to develop and enhance the characteristics of the copper-based hybrid nanocomposite containing different weight percentages of alumina and graphite hard ceramics synthesized via solid-state processing (powder metallurgy). The presence of alumina nanoparticles with a good blending process has to improve the corrosion resistance, and graphite nanoparticles may limit the weight loss of the sample during potentiodynamic corrosion analysis. The developed composite’s micro Vickers hardness is evaluated by the E384 standard on ASTM value of 69 Hv and is noted by increasing the weight percentages of alumina nanoparticles. The conduction temperature of actual sintering anticipates the thermogravimetric analysis of developed composite samples varied from 400°C to 750°C. The thermogravimetric graph illustration curve of the tested sample found double-step decomposition identified between 427°C and 456°C. The potentiodynamic analyzer is used to evaluate the corrosion behaviour of the sample and the weight loss equation adopted for finding the theoretical weight loss of the composite.
- 1 January 2023
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 2023
Open AccessThermal Adsorption and Corrosion Characteristic Study of Copper Hybrid Nanocomposite Synthesized by Powder Metallurgy Route
Novel constitutions of ceramic bond the new opportunity of engineering materials via solid-state process attaining enhanced material characteristics to overcome the drawback of conventional materials used in aquatic applications. The copper-based materials have great potential to explore high corrosion resistance and good thermal performance in the above applications. The main objectives of this research are to develop and enhance the characteristics of the copper-based hybrid nanocomposite containing different weight percentages of alumina and graphite hard ceramics synthesized via solid-state processing (powder metallurgy). The presence of alumina nanoparticles with a good blending process has to improve the corrosion resistance, and graphite nanoparticles may limit the weight loss of the sample during potentiodynamic corrosion analysis. The developed composite’s micro Vickers hardness is evaluated by the E384 standard on ASTM value of 69 Hv and is noted by increasing the weight percentages of alumina nanoparticles. The conduction temperature of actual sintering anticipates the thermogravimetric analysis of developed composite samples varied from 400°C to 750°C. The thermogravimetric graph illustration curve of the tested sample found double-step decomposition identified between 427°C and 456°C. The potentiodynamic analyzer is used to evaluate the corrosion behaviour of the sample and the weight loss equation adopted for finding the theoretical weight loss of the composite.
- Open Access
- 24 June 2022
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2022, 1-8
Parametric Optimization of Wire Electrical Discharge Machining in AA7075 Metal Matrix Composite
Aluminium 7075 metal matrix composite reinforced with silicon nitride was fabricated using the stir casting technique. Composite fabricated was machined and subjected to wire electrical discharge machining to study the significant process parameter. Taguchi design of experiment using L9 orthogonal array was selected with three factors, current, pulse ON time, and wire feed at three levels. Influencing process parameters were identified using analysis of variance. Pulse ON time of 130μs, current of 20A, and wire feed of 1mm/min were identified as optimized parameters for higher material removal rate. For a good surface finish, the optimized parameter was identified as 130μs pulse ON time, 20A current, and wire feed rate of 2mm/min. Pulse ON time was identified as an influencing parameter followed by the current in achieving better material removal rate with good surface finish, whereas wire feed has no influence on the output parameters. Results of experimentation showed improved machining characteristics for higher pulse ON time and current for machining the synthesized composite through the Taguchi design of the experiment.
- 24 June 2022
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2022, 1-8
Open AccessParametric Optimization of Wire Electrical Discharge Machining in AA7075 Metal Matrix Composite
Aluminium 7075 metal matrix composite reinforced with silicon nitride was fabricated using the stir casting technique. Composite fabricated was machined and subjected to wire electrical discharge machining to study the significant process parameter. Taguchi design of experiment using L9 orthogonal array was selected with three factors, current, pulse ON time, and wire feed at three levels. Influencing process parameters were identified using analysis of variance. Pulse ON time of 130μs, current of 20A, and wire feed of 1mm/min were identified as optimized parameters for higher material removal rate. For a good surface finish, the optimized parameter was identified as 130μs pulse ON time, 20A current, and wire feed rate of 2mm/min. Pulse ON time was identified as an influencing parameter followed by the current in achieving better material removal rate with good surface finish, whereas wire feed has no influence on the output parameters. Results of experimentation showed improved machining characteristics for higher pulse ON time and current for machining the synthesized composite through the Taguchi design of the experiment.
- Open Access
- 1 January 2022
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 2022
Modelling and Deliberation of Multireinforcement Surface on Tribothermal Adsorption Performance of Nickel Alloy Matrix Hybrid Nanocomposite
The present research work is aimed at developing a nickel alloy (Ni-Cr) matrix hybrid nanocomposite comprising 5 wt%, 10 wt%, and 15 wt% of alumina nanoparticles (Al2O3) size of 50 nm with stable weight percentage (5 wt%) of titanium dioxide (TiO2) nanoparticle via vacuum die casting process for an automobile brake pad application. The deliberation of multireinforcement surface on nickel alloy matrix tribological performance was evaluated by constant sliding distance (200 m) on dry sliding condition via rotating pin on disc apparatus with different loading conditions of 10 N, 30 N, 50 N, and 70 N under the sliding velocity of 0.25 m/sec, 0.5 m/sec, and 0.75 m/sec, respectively. The influences of alumina and titanium dioxide nanoparticles in the nickel alloy matrix resulted in the thermal conductivity increasing by 18% compared to unreinforced nickel alloy. After temperature drop, the coefficient of thermal expansion for nickel alloy hybrid composite decreases progressively with increased reinforcement content as 10 wt% Al2O3/5 wt% TiO2. Further inclusion of both Al2O3 and TiO2 in nickel alloy was increased nominally. The thermal adsorption characteristic on composites mass loss was decreased while temperature increased from 28°C to 1000°C.
- 1 January 2022
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 2022
Open AccessModelling and Deliberation of Multireinforcement Surface on Tribothermal Adsorption Performance of Nickel Alloy Matrix Hybrid Nanocomposite
The present research work is aimed at developing a nickel alloy (Ni-Cr) matrix hybrid nanocomposite comprising 5 wt%, 10 wt%, and 15 wt% of alumina nanoparticles (Al2O3) size of 50 nm with stable weight percentage (5 wt%) of titanium dioxide (TiO2) nanoparticle via vacuum die casting process for an automobile brake pad application. The deliberation of multireinforcement surface on nickel alloy matrix tribological performance was evaluated by constant sliding distance (200 m) on dry sliding condition via rotating pin on disc apparatus with different loading conditions of 10 N, 30 N, 50 N, and 70 N under the sliding velocity of 0.25 m/sec, 0.5 m/sec, and 0.75 m/sec, respectively. The influences of alumina and titanium dioxide nanoparticles in the nickel alloy matrix resulted in the thermal conductivity increasing by 18% compared to unreinforced nickel alloy. After temperature drop, the coefficient of thermal expansion for nickel alloy hybrid composite decreases progressively with increased reinforcement content as 10 wt% Al2O3/5 wt% TiO2. Further inclusion of both Al2O3 and TiO2 in nickel alloy was increased nominally. The thermal adsorption characteristic on composites mass loss was decreased while temperature increased from 28°C to 1000°C.