Characterization of Microfluidic-Based Acoustic Sensor for Immersion Application
- 16 October 2014
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 15 (3) , 1559-1566
Abstract
This paper reported the characterization study on a new type of acoustic microsensor meant for immersion or underwater application. The new proposed device is based on microfluidic technology that is found to be able to overcome the fabrication issues associated with conventional capacitive micromachined ultrasonic transducer device. The design parameters have been explained in detail as well as their design justification. In this paper, two experiments have been setup to characterize the device performance. First, the pulse catch technique was used to investigate the device's response toward acoustic pulse or burst signal. The result shows that different number of burst cycles affects the capacitive response of the device. Providing the acoustic projector with suitable burst cycle parameter had yielded capacitive response with resolution of 1.16 pF, which is useful to be deployed in any suitable application such as for control or communication purposes. Second, the vibration effect had been studied between the ranges of 10-100 Hz of vibration. For rapid transition of the vibration frequency, the fall transition has a comparable error compared with the rise transition with an error ratio of 37:1. In terms of fluctuation behavior of the response, operating the device at static or constant frequency vibration does not have significant differences on the response, indicating its stability at single-frequency operation.Keywords
Funding Information
- Postgraduate Research Grant Scheme (PRGS)
- Research University (RU) grants from University Sains Malaysia
This publication has 16 references indexed in Scilit:
- Capacitive micromachined ultrasonic transducer (CMUT) as a chemical sensor for DMMP detectionSensors and Actuators B: Chemical, 2011
- Microvalves and Micropumps for BioMEMSMicromachines, 2011
- Microfabrication of coupled fluid–structure systems with applications in acoustic sensingSensors and Actuators A: Physical, 2008
- Micropumps, microvalves, and micromixers within PCR microfluidic chips: Advances and trendsBiotechnology Advances, 2007
- Capacitive micromachined ultrasonic transducer (CMUT) arrays for medical imagingMicroelectronics Journal, 2006
- MEMS/NEMS Techniques and Applications2006
- A micro-machined acoustic sensor array for fuel level indicationSensors and Actuators A: Physical, 2004
- Micromachined cochlear-like acoustic sensor2002
- Silicon micromachined ultrasonic transducersThe Journal of the Acoustical Society of America, 1998
- The microfabrication of capacitive ultrasonic transducersJournal of Microelectromechanical Systems, 1998