2–2 piezoelectric composites with high density and fine scale fabricated by interdigital pair bonding
- 22 November 1999
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 75 (21) , 3390-3392
Abstract
Interdigital pair bonding (IPB) is proposed as a means to fabricate piezoelectric composites used for ultrasonic transducers and arrays for medical imaging and nondestructive evaluation, especially in the high frequency range. This letter presents experimental results of prototype 2–2 piezoelectric composites made by IPB. Two composites with different lateral dimensions were fabricated using 70 and 40 μm thickness dicing saw blades. The widths of ceramic stripe and epoxy kerf for composite A are 53 and 12 μm, respectively, and are 36 and 4 μm for composite B. The thickness mode and lateral modes for both composites were investigated by impedance spectrum analysis. The for both samples is 0.64. The current designs permit the fabrication of composites for transducers operated up to approximately 50 MHz using conventional dicing saw blades. The extension of IPB to fabrication of 1–3 composite is discussed.
Keywords
This publication has 9 references indexed in Scilit:
- Composite ultrasound transducer arrays for operation above 20 MHz1999
- Resonance modes and losses in 1-3 piezocomposites for ultrasonic transducer applicationsJournal of Applied Physics, 1999
- A 20 MHz single-element ultrasonic probe using 0.91Pb(Zn/sub 1/3/Nb/sub 2/3/)O/sub 3/-0.09PbTiO/sub 3/ single crystalIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1998
- Evaluation of piezocomposites for ultrasonic transducer applications influence of the unit cell dimensions and the properties of constituents on the performance of 2-2 piezocompositesIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1997
- A 100-MHz ultrasonic transducer array using ZnO thin filmsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1995
- Fabrication of high frequency spherically shaped ceramic transducersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1994
- Principles and applications of ultrasound backscatter microscopyIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1993
- Modeling 1-3 composite piezoelectrics: thickness-mode oscillationsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1991
- A 100 MHz B-Scan Ultrasound Backscatter MicroscopeUltrasonic Imaging, 1989