Modeling of a 4-DOF Flexible Laparoscopic Instrument for Robot-Assisted Minimally Invasive Surgery
Authors:
- Calin VaidaCalin Vaida
- Ionut ZimaIZIonut Zima
- Florin GraurFlorin Graur
- Bogdan GhermanBGBogdan Gherman
- Vasile BulbucanVBVasile Bulbucan
- Paul TucanPTPaul Tucan
- Alexandru PuscaAPAlexandru Pusca
- Florin ZaharieFZFlorin Zaharie
- Pierre MougenotPMPierre Mougenot
- Adrian PislaAdrian Pisla
- Damien ChablatDamien Chablat
- Nadim Al HajjarNHNadim Al Hajjar
Open Access
Abstract
Background: Flexible surgical instruments for Robot-Assisted Minimally Invasive Surgery (RAMIS) face a critical limitation: the inability to rotate the distal head while the instrument is in a bent configuration, which restricts the maneuverability in narrow surgical workspaces. Methods: This paper presents a novel 4-degree-of-freedom (DOF) flexible laparoscopic instrument with a 10 mm diameter, incorporating a 3D-printed flexible element. The design enables independent bending (0–90°), continuous distal head rotation (360°), gripper actuation (0–60°), and rod rotation (180°). A constant-curvature kinematic model was developed. The instrument was manufactured using PolyJet 3D printing technology and integrated with the ATHENA parallel robot for proof-of-concept experimental validation. Results: Experimental tests demonstrated successful independent 360° distal head rotation across the full bending range (0–90°), validated through simulated surgical procedures including stomach retraction. Quantitative characterization using optical motion capture revealed a maximum angular deflection of 79.85° at 670 g applied load, with tip displacements of 74.95 mm (X) and 91.18 mm (Y). The measured grasping force was approximately 2 N, tip position repeatability was ±2.86 mm, and fatigue testing demonstrated no degradation after 500 bending cycles, confirmed by digital microscope inspection. The instrument performed multiple manipulation tasks, including elastic band transfer, wire path navigation, spring manipulation, and tissue grasping. Conclusions: The proposed instrument addresses a significant white spot in surgical robotics by adding an additional functional capability enabling grasper reorientation without repositioning the entire instrument.Keywords
Funding Information
- European Union—Next Generation EU and Romanian Government (760072/23.05.2023)
- European Union—Next Generation EU and Romanian Government (CF 116/15.11.2022)
This publication has 77 references indexed in Scilit:
- Conceptual Design of a Flexible Instrument for Robot-Assisted Laparoscopic Pancreatic Surgery2025
- A highly intuitive and ergonomic redundant joint master device for four‐degrees of freedom flexible endoscopic surgery robotThe International Journal of Medical Robotics and Computer Assisted Surgery, 2020
- A single port surgical robot system with novel elbow joint mechanism for high force transmissionThe International Journal of Medical Robotics and Computer Assisted Surgery, 2017
- Technical review of the da Vinci surgical telemanipulatorThe International Journal of Medical Robotics and Computer Assisted Surgery, 2012
- Reviewing the technological challenges associated with the development of a laparoscopic palpation deviceThe International Journal of Medical Robotics and Computer Assisted Surgery, 2012
- Comparative Effectiveness of Minimally Invasive vs Open Radical ProstatectomyJAMA, 2009
- Development of a Control System for a Parallel Robot Used in Minimally Invasive SurgeryIFMBE Proceedings, 2009
- Bowel injury as a complication of laparoscopyBritish Journal of Surgery, 2004
- The laparoscopic experience of surgical graduates in the United StatesSurgical Endoscopy, 2003
- Minimally Invasive and Robotic SurgeryJAMA, 2001