Lateral Performance of Semi-Rigid Steel Frames with Precast Knee Bracing Systems: Testing and Finite Element Analysis
Open Access
Abstract
In this paper, the synergistic strengthening mechanism of a new type of prefabricated knee brace to semi-rigid steel frame lateral resistance was experimentally and numerically analyzed. Five full-scale specimens with a control steel frame and four knee-braced configurations were tested under pseudo-static cyclic loading in order to understand the stiffness evolution, failure mode, and energy dissipation characteristics of the specimens. Results show the following: (1) The innovative integrated knee braces increase initial lateral stiffness and yield capacity by 184–242% and 91–154% compared to conventional semi-rigid frames with acceptable ductility; (2) Three different failure modes coupled brace-joint yielding (Type I), brace dominated instability (Type II) and beam buckling brace connections (Type III) are identified; (3) Finite element simulations using ABAQUS with isotropic/kinetic hardening models show good agreement with experiments for their hysteretic responses confirming In particular the ultimate failure location is identified at the lateral screw holes of beam flanges located near brace supports where the local stress is greater than 1.8fy. The study further proposes a BIM-integrated design workflow. These results give a theoretical basis and some practical recommendations for the application of knee-braced semi-rigid systems in earthquake-resistant steel buildings.Keywords
Funding Information
- Science and Technology Plan of Guangzhou Municipal Construction Group ([2023]-KJ028)
- Key Project of Dongguan Social Development Science and Technology Project (20231800936112)
This publication has 24 references indexed in Scilit:
- Seismic resilience assessment of RC superstructures on long–short combined piled raft foundations: 3D SSI modeling with pounding effectsStructures, 2025
- A study on seismic performance of buckling restrained knee-braced jointsStructures, 2025
- Investigating the seismic performance and developing the fragility curves of self-centering steel frames with augmented nonlinear viscous damping: A numerical simulationStructures, 2024
- Improvement effects of knee-bracing friction dampers on cyclic behavior of steel joints in antique buildingsStructures, 2024
- Seismic performance evaluation and design of resilient knee braced frames equipped with shape memory alloy knee braces and replaceable energy-dissipating connectionsEngineering Structures, 2023
- Proposed seismic design parameters for the moment-resisting knee-braced frame systemEngineering Structures, 2022
- Experimental and parametric study of a novel braced system to improve seismic performanceStructures, 2022
- Experimental studies of the seismic behavior of EKBFs subjected to lateral loadingStructures, 2022
- Trade-off Pareto optimum design of an innovative curved damper truss moment frame considering structural and non-structural objectivesStructures, 2020
- On the Evaluation of the Use of EKBs to Improve Seismic Performance of Steel FramesInternational Journal of Steel Structures, 2018