Impact of Thermal Stress on Abrasive Dust from a Carbon Fiber-Reinforced Concrete Composite
Authors:
- Arne KochAKArne Koch
- Lukas FriedericiLFLukas Friederici
- Petra FialaPFPetra Fiala
- Armin SpringerASArmin Springer
- Sebastiano Di BucchianicoSBSebastiano Di Bucchianico
- Michael StintzMSMichael Stintz
- Marcus FrankMFMarcus Frank
- Christopher Paul RügerCRChristopher Paul Rüger
- Thorsten StreibelTSThorsten Streibel
- Ralf ZimmermannRZRalf Zimmermann
Open Access
Abstract
Recently, a novel corrosion-resistant construction material, Carbon Concrete Composite (C3), consisting of coated carbon fibers embedded in a concrete matrix, was introduced. However, thermal exposure during domestic fires may impact the release of organic pollutants and fibers during abrasive processing and/or demolition. Consequently, the objective of this study was to explore the emission characteristics of toxic compounds and harmful fibers during the dry-cutting after exposure to 25–600 °C (3 h, air). These parameters mimic the abrasive machining and dismantling after a domestic fire event. Mass spectrometry and chromatography served as analytical methodologies, and no organic pollutants for exposure temperatures ≥ 400 °C were found. In contrast, significant amounts of pyrolysis products from the organic fiber coating were released at lower temperatures. Studying the morphology of the released fibers by electron microscopy revealed a decrease in fiber diameter for temperatures exceeding 450 °C. At ≥550 °C, harmful fibers, according to the World Health Organization (WHO) definition, occurred (28–41 × 103 WHO fibers/m3 at 550–600 °C). This leads to the conclusion that there is a demand for restraining and protection measures, such as the use of wet cutting processes, suction devices, particle filtering masks and protective clothing, to handle thermally stressed C3.Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt (03ZZ0332A)
This publication has 54 references indexed in Scilit:
- Carbonization in Polyacrylonitrile (PAN) Based Carbon Fibers Studied by ReaxFF Molecular Dynamics SimulationsThe Journal of Physical Chemistry B, 2012
- Post spinning and pyrolysis processes of polyacrylonitrile (PAN)-based carbon fiber and activated carbon fiber: A reviewJournal of Analytical and Applied Pyrolysis, 2012
- CFRP-Recycling Following a Pyrolysis Route: Process Optimization and PotentialsJournal of Composite Materials, 2009
- Effect of carbon fiber dispersion on the mechanical properties of carbon fiber-reinforced cement-based compositesMaterials Science and Engineering: A, 2008
- Performance of Alkali-resistant Glass Fiber Reinforced ConcreteJournal of Reinforced Plastics and Composites, 2006
- Characteristics of basalt fiber as a strengthening material for concrete structuresComposites Part B: Engineering, 2005
- Lung Cancer Risk after Exposure to Polycyclic Aromatic Hydrocarbons: A Review and Meta-AnalysisEnvironmental Health Perspectives, 2004
- Particulate matter in the atmosphere: which particle properties are important for its effects on health?Science of The Total Environment, 2000
- Analysis by pyrolysis/gas chromatography/mass spectrometry of glass fibre/vinylester thermal degradation productsPolymer Degradation and Stability, 1995
- Physical Parameters of Airborne Asbestos Fibres in Various Work Environments—Preliminary FindingsAIHA Journal, 1975