TSThorsten Streibel

Thorsten Streibel

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Thorsten Streibel has a total of 176 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Development of a Ship-Based Membrane Inlet Photoionization Mass Spectrometer (MI-PIMS) for Online Detection of Explosives in Seawater

    by Carolin Schwarz, Christian Gehm, Thomas Kröger-Badge, Thorsten Streibel, Björn Raupers, Dorothée Niethammer, Denis Starostin-Penner, Hannes Lüdtke, Johannes Passig, Sven Ehlert, et al.

    Toxic nitro organic compounds, such as trinitrotoluene (TNT), released from dumped ammunition in coastal waters pose a threat to humans and the marine environment. Ship-based real-time screening of ammunition dumpsites requires online trace analysis of dissolved nitroaromatic explosives and their degradation products. We introduce a membrane inlet mass spectrometry approach (MIMS), using a laser based photofragmentation/(1 + 1)-Resonance-Enhanced Multi-Photon Ionization (REMPI) process, which forms nitrous oxide marker fragment ions (NO+). The ionization process enables simultaneous detection of all dissolved nitro organic compounds via NO+; thus, organic nitro-groups not only from the bulk explosive parent molecule (e.g., TNT) themselves but also from propellants, primers, and TNT degradation products contribute to an integrated detection reading. Online sampling of dissolved organics is performed by a hollow polydimethylsiloxane (PDMS) fiber membrane inlet. Laser parameters for the photofragmentation/REMPI detection of explosives were tested by a tunable Nd/YAG OPO laser unit, and analytical figures of merit were determined. At a wavelength of 213 nm, detection limits in the suitable range of 300 ng/L-32 μg/L were achieved for nitro organics. The developed demonstrator unit was deployed for a field test in the framework of the AMMOTRACe EU project on board a German research vessel, targeting the "Kolberger Heide", a known ammunition dumpsite in the Baltic Sea. A successful detection of explosives from the seabed was achieved, proving the feasibility of this detection technique. Furthermore, the results are paving the way toward the development of a submersible REMPI-MIMS system for in situ monitoring of underwater threads.


  • Atmospheric Aging Alters the Toxicity Mechanisms of Residential Wood Combustion Aerosol: A Parallel In Vivo and In Vitro Study

    by Svenja Offer, Hendryk Czech, Sebastiano Di Bucchianico, Anni Hartikainen, Mika Ihalainen, Henri Hakkarainen, Mikko S. Happo, Kati Huttunen, Tuukka Ihantola, Heikki Suhonen, et al.

    Residential wood combustion (RWC) contributes significantly to urban air pollution; however, the influence of atmospheric aging on adverse health effects of RWC emissions remains uncertain. We exposed C57BL/6J mice in parallel with different in vitro models of first-line of defense cells (macrophages: RAW264.7 and lung epithelial cells: A549) at the air–liquid interface to either fresh or aged RWC emissions generated from an oxidation flow reactor. Both in vivo and in vitro cellular and molecular outcomes show that photochemically aged emissions play a key role in triggering lung inflammation and the polarization of macrophages into an M2 phenotype, bridging the gap between epidemiology and toxicology on inflammatory lung responses. Furthermore, evidence of protumorigenic activity in lung epithelial cells is detected after exposure to both emissions, but more pronounced after exposure to aged RWC emissions. This study highlights the importance of considering atmospheric aging in the assessment of air-pollution-related health effects.

  • Open Access

    Resonance‐Enhanced Multiphoton Ionization Spectroscopy of Monocyclic and Polycyclic Aromatic Hydrocarbons in the Gas Phase

    by Carolin Schwarz, Fabian Etscheidt, Christian Gehm, Johannes Passig, Sven Ehlert, Thorsten Streibel, Ralf Zimmermann

    Rationale: Aromatic hydrocarbons (AHs) and polycyclic aromatic hydrocarbons (PAHs) pose significant risks to human health and the environment due to their toxic and carcinogenic properties. These depend strongly on molecular structure, with even isomers exhibiting different characteristics. Consequently, when conducting a risk assessment of a sample, a rapid and reliable detection technique capable of differentiating between isomers is crucial. Methods: Time‐of‐flight mass spectrometry (TOFMS) combined with (1 + 1) resonance‐enhanced multiphoton ionization ((1 + 1)‐REMPI) has proven to be a promising approach due to its wavelength selectivity for different structures. An optical parametric oscillator generated UV radiation from 213 to 300 nm from the third harmonic (355 nm) of a Nd:YAG laser beam. A thermogravimetric system was applied to transfer the substances into the gas phase. Results: We performed REMPI spectroscopy of 48 monocyclic and polycyclic aromatic hydrocarbons, including compounds with various substituents (alkyl groups, ‐OCH 3 , ‐SH, ‐OH, ‐Cl) and heteroatoms (N, O, S). The observed spectral shifts correlate with ring number as well as the type, number, and position of substituents and heteroatoms. While these shifts are comparable to trends observed in absorption spectra, variations in intensity arise due to differences in excited‐state lifetimes and the cross sections of both absorption steps. It was further demonstrated that the selected wavelength range, extending to a lower limit of 213 nm, is especially beneficial for the naphthalenes. The relative photoionization cross sections of the investigated compounds have been calculated, showing that the aforementioned structural dependencies also influence the ionization efficiency. Conclusions: In common applications, these results may be used to determine a suitable laser wavelength for the substances of interest in order to achieve a higher level of sensitivity. For tunable laser applications, they serve as a reference for distinguishing and quantifying isomers in complex mixtures based on spectral shifts.


  • Open Access

    In vitro genotoxic and mutagenic potentials of combustion particles from marine fuels with different sulfur contents

    by Seongho Jeong, Jana Pantzke, Svenja Offer, Uwe Käfer, Jan Bendl, Mohammad Saraji-Bozorgzad, Anja Huber, Bernhard Michalke, Uwe Etzien, Gert Jakobi, et al.


  • Open Access

    Short-lived reactive components substantially contribute to particulate matter oxidative potential

    by Steven J. Campbell, Battist Utinger, Alexandre Barth, Zaira Leni, Zhi-Hui Zhang, Julian Resch, Kangwei Li, Sarah S. Steimer, Catherine Banach, Benjamin Gfeller, et al.

    Exposure to airborne particulate matter (PM) has been attributed to millions of deaths annually. However, the PM components responsible for observed health effects remain unclear. Oxidative potential (OP) has gained increasing attention as a key property that may explain PM toxicity. Using online measurement methods that impinge particles for OP quantification within seconds, we reveal that 60 to 99% of reactive oxygen species (ROS) and OP in secondary organic aerosol and combustion-generated PM have a lifetime of minutes to hours and that the ROS activity of ambient PM decays substantially before offline analysis. This implies that current offline measurement methods substantially underestimate the true OP of PM. We demonstrate that short-lived OP components activate different toxicity pathways upon direct deposition onto reconstituted human bronchial epithelia. Therefore, we suggest that future air pollution and health studies should include online OP quantification, allowing more accurate assessments of links between OP and health effects.


  • Atmospheric Pressure Laser Ionization Mass Spectrometry with Tunable UV Wavelength Utilizing an Optical Parametric Oscillator

    by Fabian Etscheidt, Christopher P. Rüger, Carolin Schwarz, Ole Tiemann, Anika Neumann, Helly J. Hansen, Thorsten Streibel, Sven Ehlert, Ralf Zimmermann

    To our knowledge, this study presents the first implementation of wavelength-resolved resonance-enhanced multiphoton ionization (REMPI) spectroscopy under atmospheric pressure ionization conditions using a high-resolution mass spectrometric system. Atmospheric pressure laser ionization MS spectroscopic measurements were conducted on over 70 different polycyclic aromatic hydrocarbons (PAHs) and hetero-PAHs (N, S, and O) in standard solutions, as well as three complex PAH-containing samples. The results demonstrate the successful transfer of REMPI spectroscopy from vacuum to atmospheric pressure conditions, maintaining spectral integrity without significant band broadening. The obtained spectral data add an orthogonal dimension to mass spectrometry, providing structural insights into aromatic core motifs and enabling isomeric differentiation. This differentiation is further enhanced by linear regression algorithms, which allow for the semiquantitative analysis of isomer mixtures. Comparison between standard spectra and complex sample spectra reveals high correlation values for certain peaks, strongly indicating the presence of specific PAHs and distinguishing between phenanthrene and anthracene in fossil- and biobased samples.


  • Open Access

    How do different marine engine fuels and wet scrubbing affect gaseous air pollutants and ozone formation potential from ship emissions?

    by Jan Bendl, Mohammad Reza Saraji-Bozorgzad, Uwe Käfer, Sara Padoan, Ajit Mudan, Uwe Etzien, Barbara Giocastro, Julian Schade, Seongho Jeong, Evelyn Kuhn, et al.


  • Humic-like Substances (HULIS) in Ship Engine Emissions: Molecular Composition Effected by Fuel Type, Engine Mode, and Wet Scrubber Usage

    by Eric Schneider, Hendryk Czech, Helly J. Hansen, Seongho Jeong, Jan Bendl, Mohammad Saraji-Bozorgzad, Martin Sklorz, Uwe Etzien, Bert Buchholz, Thorsten Streibel, et al.

    Humic-like substances (HULIS), known for their substantial impact on the atmosphere, are identified in marine diesel engine emissions obtained from five different fuels at two engine loads simulating real world scenarios as well as the application of wet sulfur scrubbers. The HULIS chemical composition is characterized by electrospray ionization (ESI) ultrahigh resolution mass spectrometry and shown to contain partially oxidized alkylated polycyclic aromatic compounds as well as partially oxidized aliphatic compounds, both including abundant nitrogen- and sulfur-containing species, and clearly different to HULIS emitted from biomass burning. Fuel properties such as sulfur content and aromaticity as well as the fuel combustion efficiency and engine mode are reflected in the observed HULIS composition. When the marine diesel engine is operated below the optimum engine settings, e.g., during maneuvering in harbors, HULIS-C emission factors are increased (262-893 mg kg-1), and a higher number of HULIS with a shift toward lower degree of oxidation and higher aromaticity is detected. Additionally, more aromatic and aliphatic CHOS compounds in HULIS were detected, especially for high-sulfur fuel combustion. The application of wet sulfur scrubbers decreased the HULIS-C emission factors by 4-49% but also led to the formation of new HULIS compounds. Overall, our results suggest the consideration of marine diesel engines as a relevant regional source of HULIS emissions.


  • Open Access

    Impact of Thermal Stress on Abrasive Dust from a Carbon Fiber-Reinforced Concrete Composite

    by Arne Koch, Lukas Friederici, Petra Fiala, Armin Springer, Sebastiano Di Bucchianico, Michael Stintz, Marcus Frank, Christopher Paul Rüger, Thorsten Streibel, Ralf Zimmermann

    Recently, a novel corrosion-resistant construction material, Carbon Concrete Composite (C3), consisting of coated carbon fibers embedded in a concrete matrix, was introduced. However, thermal exposure during domestic fires may impact the release of organic pollutants and fibers during abrasive processing and/or demolition. Consequently, the objective of this study was to explore the emission characteristics of toxic compounds and harmful fibers during the dry-cutting after exposure to 25–600 °C (3 h, air). These parameters mimic the abrasive machining and dismantling after a domestic fire event. Mass spectrometry and chromatography served as analytical methodologies, and no organic pollutants for exposure temperatures ≥ 400 °C were found. In contrast, significant amounts of pyrolysis products from the organic fiber coating were released at lower temperatures. Studying the morphology of the released fibers by electron microscopy revealed a decrease in fiber diameter for temperatures exceeding 450 °C. At ≥550 °C, harmful fibers, according to the World Health Organization (WHO) definition, occurred (28–41 × 103 WHO fibers/m3 at 550–600 °C). This leads to the conclusion that there is a demand for restraining and protection measures, such as the use of wet cutting processes, suction devices, particle filtering masks and protective clothing, to handle thermally stressed C3.


  • Open Access

    Characterization of Biochars by Thermal Analysis Mass Spectrometry – Feed Analysis, Product Description, and Reaction Monitoring

    by Lukas Friederici, Sara-Maaria Meščeriakovė, Anika Neumann, Ekaterina Sermyagina, Arūnas Meščeriakovas, Ann Lähde, Christoph Grimmer, Thorsten Streibel, Christopher Rüger, Ralf Zimmermann

    Graphite and activated carbon have widespread applications in various technical fields, e.g. , water/gas purification and battery production. However, the production of graphite requires high temperatures, and fossil petroleum, coal, or nutshells are frequently used as a carbon source. As a replacement, lignin, a by-product of the pulp and paper industry, is a promising carbon source with a prefigured aromatic network. Unfortunately, lignin, derived from pulp production, has a high oxygen and water content. Hydrothermal carbonization (HTC) is reported as a novel and green method for mild thermochemical processing of wet biomass. Biomass-based feedstocks with improved characteristics can be obtained by this technique, but the chemical nature of this process is not fully understood yet. Adding a eutectic salt mixture (LiCl/KCl) to the pyrolysis of Kraft lignin and HTC lignin can improve the graphitization at lower temperatures. To explore the influence of the salt mixture, thermal analysis with online mass spectrometric detection of the evolved gas mixture was applied in this study. With the help of soft photoionization, phenol, hydrogen sulfide, dimethyl sulfide and various larger lignin fragments were identified. These larger dimeric/trimeric methoxyphenol derivatives were successfully identified by means of high-resolution mass spectrometry. Most importantly, it was possible to mimic the pyrolysis process with the eutectic salt mixture in the thermal balance at a laboratory-scale and to directly explore the evolved gas mixture on a molecular level. The investigations indicated the catalytic influence of the salt mixture on the production process of the biochars, achieving partially graphitization already at relatively low temperatures (700 °C). Insights obtained in this study improves the process understanding for future research to optimize and reduce the energy demand of different production steps, which leads to a decrease the carbon footprint for this kind of renewable feedstock.