Measurements of dust and respirable crystalline silica during indoor demolition and renovation
Open Access
- 22 October 2024
- journal article
- research article
- Published by Oxford University Press (OUP) in Annals of Work Exposures and Health
- Vol. 69 (1) , 48-58
Abstract
Increased focus on renovating and maintaining the existing building stock is an integral part of the circular economy, however this might pose challenges to workers health. The aim of this study was to assess the renovation workers’ exposure to inhalable dust, thoracic dust, respirable dust, and respirable crystalline silica (RCS). Personal aerosol samples were collected as full shift samples from 92 workers to a total of 407 samples. Fourteen locations around Oslo, Norway was visited for multiple days with repeated measurements of the same individual. Particulate matter from 3 aerosol fractions, respirable, thoracic, and inhalable, were analyzed gravimetrically, and the respirable fraction was analyzed for RCS by NIOSH 7500 method for X-ray diffraction (XRD) with low temperature plasma ashing sample preparation. The total measured concentrations of respirable dust (n = 192) had a geometric mean (GM) of 0.88 mg/m3, RCS concentrations (n = 182) had a GM of 0.040 mg/m3, thoracic dust (n = 131) had GM 2.4 mg/m3, and inhalable dust (n = 84) had a GM of 8.5 mg/m3. The maximum measured concentrations were 29 mg/m3, 3.2 mg/m3, 65 mg/m3, and 163 mg/m3, respectively. Workdays involving tasks such as mechanical demolition and clearing out demolished materials led to the highest exposure levels of both dust and RCS. However, other workers at the renovation sites were indirectly exposed to a considerable amount of RCS. This study revealed substantial exposure to both RCS and dust during renovation, and protective measures are warranted to reduce exposure levels in the industry.Keywords
Funding Information
- Norwegian Agreement for a More Inclusive Working Life
This publication has 18 references indexed in Scilit:
- A systematic review of the effectiveness of dust control measures adopted to reduce workplace exposureEnvironmental Science and Pollution Research, 2023
- Dynamic health risk assessment model for construction dust hazards in the reuse of industrial buildingsBuilding and Environment, 2022
- Determinants of Respirable Quartz Exposure Concentrations Across Occupations in Denmark, 2018Annals of Work Exposures and Health, 2021
- Effectiveness of a Multidimensional Randomized Control Intervention to Reduce Quartz Exposure Among Construction WorkersAnnals of Occupational Hygiene, 2015
- Effectiveness of Dust Control Methods for Crystalline Silica and Respirable Suspended Particulate Matter Exposure During Manual Concrete Surface GrindingJournal of Occupational and Environmental Hygiene, 2010
- Silica Exposure on Construction Sites: Results of an Exposure Monitoring Data Compilation ProjectJournal of Occupational and Environmental Hygiene, 2006
- Variability in Quartz Exposure in the Construction Industry: Implications for Assessing Exposure-Response RelationsJournal of Occupational and Environmental Hygiene, 2004
- Chronic obstructive pulmonary disease due to occupational exposure to silica dust: a review of epidemiological and pathological evidenceOccupational and Environmental Medicine, 2003
- Determinants of exposure to respirable quartz dust in the construction industryAnnals of Occupational Hygiene, 2001
- Compliance Versus Risk in Assessing Occupational ExposuresRisk Analysis, 1997