Lignin phosphorylation to enhance mechanical and physical properties and reduce formaldehyde emissions in plywood panels
Open Access
- 11 February 2026
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (10) , 9092-9107
Abstract
Lignin is gaining more attention for its potential use in adhesives for wood-based composites owing to its accessibility, molecular structure, barrier properties, and potential for chemical modification. In order to assess the physical, thermal, and mechanical performances of alkaline lignin (AL) and its ability to reduce formaldehyde emissions in synthetic phenol formaldehyde (PF) adhesives used to glue plywood panels, AL was surface-modified by a phosphorylation treatment to produce phosphorylated alkali lignin. In this study, lignin was isolated from alkali-treated powdered argan shells and subsequently phosphorylated to obtain phosphorylated lignin (P-AL). The isolated lignin was characterized by two-dimensional (2D-1H and 13C NMR) heteronuclear single quantum coherence (HSQC) spectra to confirm its successful isolation from argan shells. Both AL and P-AL were then subjected to a series of analytical techniques, including Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) with elemental mapping, X-ray fluorescence (XRF) spectrometry, phosphorus nuclear magnetic resonance (31P NMR) spectroscopy, conductimetric titration (to determine the phosphorylation rate), thermogravimetric and derivative thermogravimetric analysis (TGA/DTG) and X-ray diffraction (XRD) analysis. Afterwards, P-AL was formulated with PF resin and applied to plywood panels, following characterizations to evaluate mechanical properties, such as bond strength (BS), modulus of rupture (MOR), modulus of elasticity (MOE), shear strength (SS), and formaldehyde emission (FE). Results showed that lignin phosphorylation had a significantly positive effect on plywood adhesion, especially in terms of FE, which decreased from 2.5 to 1.89 mg−1 m−2 h−1, while maintaining higher mechanical properties, including an MOE of 4144 MPa and an MOR of 66 MPa.Keywords
This publication has 60 references indexed in Scilit:
- Mechanochemical treatment boosted microwave-assisted sulfonation of softwood lignin for the fabrication of dye dispersantChemical Engineering Journal, 2025
- Extraction, characterization and chemical functionalization of phosphorylated cellulose derivatives from Giant Reed PlantCellulose, 2021
- Thermogravimetric analysis of teeth for forensic purposesJournal of Thermal Analysis and Calorimetry, 2019
- Effects of Hydrothermal Methods such as Steam Explosion and Microwave Irradiation on Extraction of Water Soluble Antioxidant Materials from Garlic HuskWaste and Biomass Valorization, 2018
- Delignification from Geodae-Uksae1 using soda-pulping followed by evaluation on recycling of liquid-liquid extraction solventBiomass and Bioenergy, 2018
- The impact of argan oil on plasma lipids in humans: Systematic review and meta‐analysis of randomized controlled trialsPhytotherapy Research, 2017
- Functionalized lignin for halogen-free flame retardant rigid polyurethane foam: preparation, thermal stability, fire performance and mechanical propertiesJournal of Polymer Research, 2013
- Scavengers for achieving zero formaldehyde emission of wood-based panelsWood Science and Technology, 2013
- Biomimetic surface modification of polycarbonateurethane film via phosphorylcholine-graft for resisting platelet adhesionMacromolecular Research, 2012
- Argan oil: Occurrence, composition and impact on human healthEuropean Journal of Lipid Science and Technology, 2008