Determination of minimum-cost synthetic mooring systems for large floating wind turbines deployed in intermediate water depths
- 1 January 2023
- journal article
- conference paper
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 15 (1)
Abstract
As the wind industry develops larger turbines for offshore deployment, the problems with station keeping systems are exacerbated. As turbines increase in size, so do the loads on the turbine. Meanwhile, many offshore sites available for leasing occur in intermediate water depths (55–85 m), which will appear ever smaller relative to the increasing platform size of floating offshore wind turbines. This complicates the process of designing mooring systems for these larger systems and emphasizes the importance of having a good methodology for automating this process. In this paper, a routine is developed that will map objectives for a multi-objective genetic algorithm to obtain mooring radius-lowest cost designs over a range of radii simultaneously. This work will implement and expand on a tiered-constraint evaluation scheme that was developed in the previous work by West et al. [Modelling 2, 728–752 (2021)]. New components and constraints are added to the optimization problem to allow the optimizer to find realistically deployable designs with reasonably accurate cost estimates. These techniques will then be used to find the most economic mooring designs for a 15-MW floating offshore wind turbine with a hybrid mooring system.Keywords
Funding Information
- New York State Energy Research and Development Authority (PON4424 154676)
This publication has 13 references indexed in Scilit:
- IEA Wind TCP Task 37: Definition of the IEA 15-Megawatt Offshore Reference Wind Turbine2020
- Design optimization of mooring system: An application to a vessel-shaped offshore fish farmEngineering Structures, 2019
- Mooring system design optimization using a surrogate assisted multi-objective genetic algorithmEngineering Optimization, 2018
- Cost Optimization of Mooring Solutions for Large Floating Wave Energy ConvertersEnergies, 2018
- Dynamic design optimization of an equivalent truncated mooring systemOcean Engineering, 2016
- Optimization of Mooring Systems for Floating Offshore Wind TurbinesCoastal Engineering Journal, 2015
- Validation of a lumped-mass mooring line model with DeepCwind semisubmersible model test dataOcean Engineering, 2015
- Mooring System Optimization for Floating Wind Turbines using Frequency Domain AnalysisEnergy Procedia, 2012
- Multi-objective optimization of functionally graded materials with temperature-dependent material propertiesMaterials & Design (1980-2015), 2007
- A fast and elitist multiobjective genetic algorithm: NSGA-IIIEEE Transactions on Evolutionary Computation, 2002