Spencer T. Hallowell
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Spencer T. Hallowell has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Mahdi Mehrtash
Ralph OConnor Sustainable Energy Institute, The Johns Hopkins University, Baltimore, MD, USA
2 shared publications - Andrew J. Goupee
Department of Mechanical Engineering, University of Maine, Orono, ME 04473, USA
1 shared publication Andrew Myers
1 shared publicationAnthony M. Viselli
Advanced Structures and Composites Center, University of Maine 1 , 35 Flagstaff Road, Orono, Maine 04469, USA
1 shared publicationBenjamin F. Hobbs
1 shared publication- Benjamin F. Hobbs
The Johns Hopkins University
1 shared publication
Latest Publications
- Open Access
- 1 March 2026
- Published by KEAI Publishing in Advances in Wind Engineering
- Vol. 3 (1)
Assessing risks and opportunities for offshore wind energy under evolving tropical cyclone hazards
- 1 March 2026
- Published by KEAI Publishing in Advances in Wind Engineering
- Vol. 3 (1)
Open AccessAssessing risks and opportunities for offshore wind energy under evolving tropical cyclone hazards
- 27 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 62 (3) , 5182-5191
High-Fidelity Resource Adequacy Study Considering Hurricane-Driven Offshore Wind Outages: A PJM Case Study
We propose a method to quantify the impact of hurricane-driven outages of offshore wind (OSW) generators on resource adequacy (RA). This method is applied to the PJM market, which is geographically exposed to hurricanes and includes approximately half of the 30 GW of OSW planned for installation in the Atlantic Ocean by 2030. While PJM has extensive reliability planning processes, detailed information on hurricane-specific hardening measures for OSW assets is not yet available given the limited existing deployment. Using NREL's probabilistic resource adequacy tool (PRAS), we develop a high fidelity reliability model of PJM that incorporates storage and individual transmission lines in addition to generators. We estimate forced outage rates and durations by explicitly modeling hurricane-induced preventive shutdowns and post-hurricane inspections and repairs. Multiple scenarios are considered to capture the probabilities and severities of hurricane-driven damage to OSW turbines, based on wind speeds extracted from a catalog of 100,000 years of simulated Atlantic hurricanes. To cost effectively mitigate these reliability risks, we propose a resource augmentation strategy with investments in generation, storage, and/or transmission. Our results indicate that hurricane-related reliability risks in PJM can be mitigated by constructing up to 210 MW of peaker capacity (in the most conservative scenario), which is approximately 0.1% of PJM's installed capacity, at a cost several orders of magnitude below PJM's annual capacity market revenues. Our findings highlight the need for strategic investments to maintain system reliability as OSW deployment grows in hurricane-prone regions, emphasizing the importance of system planners and policymakers to account for extreme-weather-driven outages in long-term capacity planning.
- 27 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 62 (3) , 5182-5191
High-Fidelity Resource Adequacy Study Considering Hurricane-Driven Offshore Wind Outages: A PJM Case Study
We propose a method to quantify the impact of hurricane-driven outages of offshore wind (OSW) generators on resource adequacy (RA). This method is applied to the PJM market, which is geographically exposed to hurricanes and includes approximately half of the 30 GW of OSW planned for installation in the Atlantic Ocean by 2030. While PJM has extensive reliability planning processes, detailed information on hurricane-specific hardening measures for OSW assets is not yet available given the limited existing deployment. Using NREL's probabilistic resource adequacy tool (PRAS), we develop a high fidelity reliability model of PJM that incorporates storage and individual transmission lines in addition to generators. We estimate forced outage rates and durations by explicitly modeling hurricane-induced preventive shutdowns and post-hurricane inspections and repairs. Multiple scenarios are considered to capture the probabilities and severities of hurricane-driven damage to OSW turbines, based on wind speeds extracted from a catalog of 100,000 years of simulated Atlantic hurricanes. To cost effectively mitigate these reliability risks, we propose a resource augmentation strategy with investments in generation, storage, and/or transmission. Our results indicate that hurricane-related reliability risks in PJM can be mitigated by constructing up to 210 MW of peaker capacity (in the most conservative scenario), which is approximately 0.1% of PJM's installed capacity, at a cost several orders of magnitude below PJM's annual capacity market revenues. Our findings highlight the need for strategic investments to maintain system reliability as OSW deployment grows in hurricane-prone regions, emphasizing the importance of system planners and policymakers to account for extreme-weather-driven outages in long-term capacity planning.
- 1 January 2023
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 15 (1)
Determination of minimum-cost synthetic mooring systems for large floating wind turbines deployed in intermediate water depths
As the wind industry develops larger turbines for offshore deployment, the problems with station keeping systems are exacerbated. As turbines increase in size, so do the loads on the turbine. Meanwhile, many offshore sites available for leasing occur in intermediate water depths (55–85 m), which will appear ever smaller relative to the increasing platform size of floating offshore wind turbines. This complicates the process of designing mooring systems for these larger systems and emphasizes the importance of having a good methodology for automating this process. In this paper, a routine is developed that will map objectives for a multi-objective genetic algorithm to obtain mooring radius-lowest cost designs over a range of radii simultaneously. This work will implement and expand on a tiered-constraint evaluation scheme that was developed in the previous work by West et al. [Modelling 2, 728–752 (2021)]. New components and constraints are added to the optimization problem to allow the optimizer to find realistically deployable designs with reasonably accurate cost estimates. These techniques will then be used to find the most economic mooring designs for a 15-MW floating offshore wind turbine with a hybrid mooring system.
- 1 January 2023
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 15 (1)
Determination of minimum-cost synthetic mooring systems for large floating wind turbines deployed in intermediate water depths
As the wind industry develops larger turbines for offshore deployment, the problems with station keeping systems are exacerbated. As turbines increase in size, so do the loads on the turbine. Meanwhile, many offshore sites available for leasing occur in intermediate water depths (55–85 m), which will appear ever smaller relative to the increasing platform size of floating offshore wind turbines. This complicates the process of designing mooring systems for these larger systems and emphasizes the importance of having a good methodology for automating this process. In this paper, a routine is developed that will map objectives for a multi-objective genetic algorithm to obtain mooring radius-lowest cost designs over a range of radii simultaneously. This work will implement and expand on a tiered-constraint evaluation scheme that was developed in the previous work by West et al. [Modelling 2, 728–752 (2021)]. New components and constraints are added to the optimization problem to allow the optimizer to find realistically deployable designs with reasonably accurate cost estimates. These techniques will then be used to find the most economic mooring designs for a 15-MW floating offshore wind turbine with a hybrid mooring system.
- 9 August 2021
- Published by ASME International in ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B. Mechanical Engineering
- Vol. 7 (4)
Optimizing the Cost and Reliability of Shared Anchors in an Array of Floating Offshore Wind Turbines
Commercial floating offshore wind projects are expected to emerge in the U.S. by the end of this decade. Currently, however, high costs for the technology limit its commercial viability, and a lack of data regarding system reliability heightens project risk. This work presents an optimization algorithm to examine the tradeoffs between cost and reliability for a floating offshore wind array that uses shared anchoring. Combining a multivariable genetic algorithm with elements of Bayesian optimization, the optimization algorithm selectively increases anchor strengths to minimize the added costs of failure for a large floating wind farm in the Gulf of Maine under survival load conditions. The algorithm uses an evaluation function that computes the probability of mooring system failure, then calculates the expected maintenance costs of a failure via a Monte Carlo method. A cost sensitivity analysis is also performed to compare results for a range of maintenance cost profiles. The results indicate that virtually all of the farm's anchors are strengthened in the minimum cost solution. Anchor strength is increased between 5 and 35% depending on farm location, with anchor strength nearest the export cable being increased the most. The optimal solutions maintain a failure probability of 1.25%, demonstrating the tradeoff point between cost and reliability. System reliability was found to be particularly sensitive to changes in turbine costs and downtime, suggesting further research into floating offshore wind turbine failure modes in extreme loading conditions could be particularly impactful in reducing project uncertainty.
- 9 August 2021
- Published by ASME International in ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B. Mechanical Engineering
- Vol. 7 (4)
Optimizing the Cost and Reliability of Shared Anchors in an Array of Floating Offshore Wind Turbines
Commercial floating offshore wind projects are expected to emerge in the U.S. by the end of this decade. Currently, however, high costs for the technology limit its commercial viability, and a lack of data regarding system reliability heightens project risk. This work presents an optimization algorithm to examine the tradeoffs between cost and reliability for a floating offshore wind array that uses shared anchoring. Combining a multivariable genetic algorithm with elements of Bayesian optimization, the optimization algorithm selectively increases anchor strengths to minimize the added costs of failure for a large floating wind farm in the Gulf of Maine under survival load conditions. The algorithm uses an evaluation function that computes the probability of mooring system failure, then calculates the expected maintenance costs of a failure via a Monte Carlo method. A cost sensitivity analysis is also performed to compare results for a range of maintenance cost profiles. The results indicate that virtually all of the farm's anchors are strengthened in the minimum cost solution. Anchor strength is increased between 5 and 35% depending on farm location, with anchor strength nearest the export cable being increased the most. The optimal solutions maintain a failure probability of 1.25%, demonstrating the tradeoff point between cost and reliability. System reliability was found to be particularly sensitive to changes in turbine costs and downtime, suggesting further research into floating offshore wind turbine failure modes in extreme loading conditions could be particularly impactful in reducing project uncertainty.