Effect of dysprosium and lutetium metal buffer layers on the resistive switching characteristics of Cu–Sn alloy-based conductive-bridge random access memory
- 17 July 2018
- journal article
- research article
- Published by IOP Publishing in Nanotechnology
- Vol. 29 (38) , 385207
Abstract
The conductive-bridge random access memory (CBRAM) has become one of the most suitable candidates for non-volatile memory in next-generation information and communication technology. The resistive switching (RS) mechanism of CBRAM depends on the formation/annihilation of the conductive filament (CF) between the active metal electrode and the inert electrode. However, excessive ion injection from the active electrode into the solid electrolyte reduces the uniformity and reliability of the RS devices. To solve this problem, we investigated the RS characteristics of a CuSn alloy active electrode with different compositions of Cu x –Sn 1–x (0.13 < X < 0.55). The RS characteristics were further improved by inserting a dysprosium (Dy) or lutetium (Lu) buffer layer at the interface of Cu x –Sn 1–x /Al 2 O 3 . Electrical analysis of the optimal Cu 0.4 –Sn 0.73 /Lu-based CBRAM exhibited stable RS behavior with low operation voltage (SET: 0.7 V and RESET: −0.3 V), a high on state/off state resistive ratio (10 6 ), AC cyclic endurance (>10 4 ), and stable retention (85 °C/10 years). To achieve these performance parameters, CFs were locally formed inside the electrolyte using a modified CuSn active electrode, and the amount of Cu-ion injection was reduced by inserting the Dy or Lu buffer layer between the CuSn active electrode and the electrolyte. In particular, conductive-atomic force microscopy results at the Dy or Lu/Al 2 O 3 interface directly showed and defined the diameter of the CF.Keywords
Funding Information
- National Research Foundation of Korea (2015M3A7B7045496, 2017R1A2A2A05022574)
This publication has 37 references indexed in Scilit:
- Current conduction and resistive switching characteristics of Sm2O3 and Lu2O3 thin films for low-power flexible memory applicationsJournal of Applied Physics, 2014
- Switching mechanism and reverse engineering of low-power Cu-based resistive switching devicesNanoscale, 2013
- Microscopy study of the conductive filament in HfO2 resistive switching memory devicesMicroelectronic Engineering, 2013
- Nanoscale resistive switching devices: mechanisms and modelingNanoscale, 2013
- Filament observation in metal-oxide resistive switching devicesApplied Physics Letters, 2013
- A fast, high-endurance and scalable non-volatile memory device made from asymmetric Ta2O5−x/TaO2−x bilayer structuresNature Materials, 2011
- Resistive Switching Characteristics of Solution-Processed Transparent TiO[sub x] for Nonvolatile Memory ApplicationJournal of the Electrochemical Society, 2010
- Resistive switching in transition metal oxidesMaterials Today, 2008
- Nanoionics-based resistive switching memoriesNature Materials, 2007
- Quantized conductance atomic switchNature, 2005