Sujaya Kumar Vishwanath
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sujaya Kumar Vishwanath has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
Hyunsuk Woo
Korea University, Sejongro, Sejong, Korea (the Republic of)
5 shared publications- Sanghun Jeon
School of Electrical Engineering Korea Advanced Institute of Science and Technology Daejeon Republic of Korea
5 shared publications - Anil Kanwat
Nanyang Technological University X-Frontier Block, Level 5, 50 Nanyang Drive
2 shared publications - Jihoon Kim
Division of Advanced Materials Engineering, Kongju National University, Chungnam 31080, Republic of Korea
2 shared publications - Nripan Mathews
School of Materials Science and Engineering Nanyang Technological University Singapore Singapore
2 shared publications Sanghun Jeon
2 shared publications
Latest Publications
- Open Access
- 1 December 2025
- Published by IOP Publishing in Neuromorphic Computing and Engineering
- Vol. 5 (4) , 042001
Retinomorphic devices beyond silicon for dynamic machine vision
The human visual system can effectively sense optical information through the retina and process it at the visual cortex. Compared with conventional machine vision, it demonstrates superiority in terms of energy efficiency, adaptability, and accuracy. The retina-inspired machine vision systems can process information near or within the sensors at the front end, thereby compressing the raw sensory data and optimising the input to back-end processor for high-level computing tasks. In recent years, amid surge of interest in artificial intelligence technology, research in retinomorphic devices has achieved breakthroughs in both academic and industrial settings. Herein, we present a comprehensive review of this emerging field -based on several materials classes, such as halide perovskites, two-dimensional materials, organic materials and metal oxides. We discuss the steps taken towards achieving not only static pattern recognition, but also dynamic motion tracking and we identify the key challenges that need to be addressed by the community to push this technology forward.
- 1 December 2025
- Published by IOP Publishing in Neuromorphic Computing and Engineering
- Vol. 5 (4) , 042001
Open AccessRetinomorphic devices beyond silicon for dynamic machine vision
The human visual system can effectively sense optical information through the retina and process it at the visual cortex. Compared with conventional machine vision, it demonstrates superiority in terms of energy efficiency, adaptability, and accuracy. The retina-inspired machine vision systems can process information near or within the sensors at the front end, thereby compressing the raw sensory data and optimising the input to back-end processor for high-level computing tasks. In recent years, amid surge of interest in artificial intelligence technology, research in retinomorphic devices has achieved breakthroughs in both academic and industrial settings. Herein, we present a comprehensive review of this emerging field -based on several materials classes, such as halide perovskites, two-dimensional materials, organic materials and metal oxides. We discuss the steps taken towards achieving not only static pattern recognition, but also dynamic motion tracking and we identify the key challenges that need to be addressed by the community to push this technology forward.
- 7 April 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (5) , 2193-2202
Lead-Free Cs3Bi2I9 Perovskite Memristors for Energy-Efficient Neuromorphic Computing
- 7 April 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (5) , 2193-2202
Lead-Free Cs3Bi2I9 Perovskite Memristors for Energy-Efficient Neuromorphic Computing
- 24 December 2024
- Published by Wiley in Laser & Photonics Reviews
- Vol. 19 (6)
Unconventional Photo‐Control of Structural Features Using Elliptically Polarized Light
The holographic interference of either same‐handed or orthogonal polarized beams is commonly employed in the fabrication of optical elements as it enables the development of an ideal sinusoidal surface modulation by inducing the mass migration of photochromic polymer. However, this approach encounters challenges in producing multiplexed optical elements with a complex surface topography, primarily due to only sinusoidal surface topography which limits control over the feature's shape and size. Here, a versatile approach is demonstrated for fabricating spatially multiplexed optical elements using ellipticity‐controlled orthogonally elliptically polarized (OEP) beams that offer distorted square‐like and rhombus‐like pillars on the azopolymer layer by asymmetric azopolymer migration driven by spatially varying ellipticity and azimuth angle of interference beam. These multiplexed distorted shapes enable selective energy transfer during light diffraction and also induce a phase‐shift to polarization states. Ellipticity control of both writing and interference beams provides an additional degree of freedom for structuring the surface topography of optical elements. Furthermore, a quantitative analysis of the multiplexed OEP surface relief is performed to achieve distinct diffraction properties, thereby rendering its suitability for fabricating complex optical elements.
- 24 December 2024
- Published by Wiley in Laser & Photonics Reviews
- Vol. 19 (6)
Unconventional Photo‐Control of Structural Features Using Elliptically Polarized Light
The holographic interference of either same‐handed or orthogonal polarized beams is commonly employed in the fabrication of optical elements as it enables the development of an ideal sinusoidal surface modulation by inducing the mass migration of photochromic polymer. However, this approach encounters challenges in producing multiplexed optical elements with a complex surface topography, primarily due to only sinusoidal surface topography which limits control over the feature's shape and size. Here, a versatile approach is demonstrated for fabricating spatially multiplexed optical elements using ellipticity‐controlled orthogonally elliptically polarized (OEP) beams that offer distorted square‐like and rhombus‐like pillars on the azopolymer layer by asymmetric azopolymer migration driven by spatially varying ellipticity and azimuth angle of interference beam. These multiplexed distorted shapes enable selective energy transfer during light diffraction and also induce a phase‐shift to polarization states. Ellipticity control of both writing and interference beams provides an additional degree of freedom for structuring the surface topography of optical elements. Furthermore, a quantitative analysis of the multiplexed OEP surface relief is performed to achieve distinct diffraction properties, thereby rendering its suitability for fabricating complex optical elements.
- 28 September 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 12 (39) , 9569-9578
One-Pot Synthesis and Structural Evolution of Colloidal Cesium Lead Halide–Lead Sulfide Heterostructure Nanocrystals for Optoelectronic Applications
Heterostructures, combining perovskite nanocrystals (PNC) and chalcogenide quantum dots, could pave a path to optoelectronic device applications by enabling absorption in the near-infrared region, tailorable electronic properties, and stable crystal structures. Ideally, the heterostructure host material requires a similar lattice constant as the guest which is also constrained by the synthesis protocol and materials selectivity. Herein, we present an efficient one-pot hot-injection method to synthesize colloidal all-inorganic cesium lead halide–lead sulfide (CsPbX3 (X = Cl, Br, I)–PbS) heterostructure nanocrystals (HNCs) via the epitaxial growth of the perovskite onto the presynthesized PbS nanocrystals (NCs). Optical and structural characterization evidenced the formation of heterostructures. The embedding of PbS NCs into CsPbX3 perovskite allows the tuning of the absorption and emission from 400 to 1100 nm by tuning the size and composition of perovskite HNCs. The CsPbI3–PbS HNCs show enhanced stability in ambient conditions. The stability, tunable optical properties, and variable band alignments accessible in this system would have implications in the design of novel optoelectronic applications such as light-emitting diodes, photodetectors, photocatalysis, and photovoltaics.
- 28 September 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 12 (39) , 9569-9578
One-Pot Synthesis and Structural Evolution of Colloidal Cesium Lead Halide–Lead Sulfide Heterostructure Nanocrystals for Optoelectronic Applications
Heterostructures, combining perovskite nanocrystals (PNC) and chalcogenide quantum dots, could pave a path to optoelectronic device applications by enabling absorption in the near-infrared region, tailorable electronic properties, and stable crystal structures. Ideally, the heterostructure host material requires a similar lattice constant as the guest which is also constrained by the synthesis protocol and materials selectivity. Herein, we present an efficient one-pot hot-injection method to synthesize colloidal all-inorganic cesium lead halide–lead sulfide (CsPbX3 (X = Cl, Br, I)–PbS) heterostructure nanocrystals (HNCs) via the epitaxial growth of the perovskite onto the presynthesized PbS nanocrystals (NCs). Optical and structural characterization evidenced the formation of heterostructures. The embedding of PbS NCs into CsPbX3 perovskite allows the tuning of the absorption and emission from 400 to 1100 nm by tuning the size and composition of perovskite HNCs. The CsPbI3–PbS HNCs show enhanced stability in ambient conditions. The stability, tunable optical properties, and variable band alignments accessible in this system would have implications in the design of novel optoelectronic applications such as light-emitting diodes, photodetectors, photocatalysis, and photovoltaics.
- Open Access
- 29 May 2021
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 6 (23) , 14734-14747
Grape Seed Extract Assisted Synthesis of Dual-Functional Anatase TiO2 Decorated Reduced Graphene Oxide Composite for Supercapacitor Electrode Material and Visible Light Photocatalytic Degradation of Bromophenol Blue Dye
- 29 May 2021
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 6 (23) , 14734-14747
Open AccessGrape Seed Extract Assisted Synthesis of Dual-Functional Anatase TiO2 Decorated Reduced Graphene Oxide Composite for Supercapacitor Electrode Material and Visible Light Photocatalytic Degradation of Bromophenol Blue Dye
- Open Access
- 12 August 2020
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-12
Self healable neuromorphic memtransistor elements for decentralized sensory signal processing in robotics
Sensory information processing in robot skins currently rely on a centralized approach where signal transduction (on the body) is separated from centralized computation and decision-making, requiring the transfer of large amounts of data from periphery to central processors, at the cost of wiring, latency, fault tolerance and robustness. We envision a decentralized approach where intelligence is embedded in the sensing nodes, using a unique neuromorphic methodology to extract relevant information in robotic skins. Here we specifically address pain perception and the association of nociception with tactile perception to trigger the escape reflex in a sensorized robotic arm. The proposed system comprises self-healable materials and memtransistors as enabling technologies for the implementation of neuromorphic nociceptors, spiking local associative learning and communication. Configuring memtransistors as gated-threshold and -memristive switches, the demonstrated system features in-memory edge computing with minimal hardware circuitry and wiring, and enhanced fault tolerance and robustness.
- 12 August 2020
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-12
Open AccessSelf healable neuromorphic memtransistor elements for decentralized sensory signal processing in robotics
Sensory information processing in robot skins currently rely on a centralized approach where signal transduction (on the body) is separated from centralized computation and decision-making, requiring the transfer of large amounts of data from periphery to central processors, at the cost of wiring, latency, fault tolerance and robustness. We envision a decentralized approach where intelligence is embedded in the sensing nodes, using a unique neuromorphic methodology to extract relevant information in robotic skins. Here we specifically address pain perception and the association of nociception with tactile perception to trigger the escape reflex in a sensorized robotic arm. The proposed system comprises self-healable materials and memtransistors as enabling technologies for the implementation of neuromorphic nociceptors, spiking local associative learning and communication. Configuring memtransistors as gated-threshold and -memristive switches, the demonstrated system features in-memory edge computing with minimal hardware circuitry and wiring, and enhanced fault tolerance and robustness.
- 5 November 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (47) , 26893-26904
Engineering Rhynchostylis retusa-like heterostructured α-nickel molybdate with enhanced redox properties for high-performance rechargeable asymmetric supercapacitors
Rhynchostylis retusa-like α-NiMoO4 was synthesized using a simple, single-step, and cost-effective wet-chemistry approach, and it exhibited the superior electrochemical properties.
- 5 November 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (47) , 26893-26904
Engineering Rhynchostylis retusa-like heterostructured α-nickel molybdate with enhanced redox properties for high-performance rechargeable asymmetric supercapacitors
Rhynchostylis retusa-like α-NiMoO4 was synthesized using a simple, single-step, and cost-effective wet-chemistry approach, and it exhibited the superior electrochemical properties.
- Open Access
- 1 October 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-11
Transparent and Flexible Mayan-Pyramid-based Pressure Sensor using Facile-Transferred Indium tin Oxide for Bimodal Sensor Applications
Transparent and conducting flexible electrodes have been successfully developed over the last few decades due to their potential applications in optoelectronics. However, recent developments in smart electronics, such as a direct human-machine interface, health-monitoring devices, motion-tracking sensors, and artificially electronic skin also require materials with multifunctional properties such as transparency, flexibility and good portability. In such devices, there remains room to develop transparent and flexible devices such as pressure sensors or temperature sensors. Herein, we demonstrate a fully transparent and flexible bimodal sensor using indium tin oxide (ITO), which is embedded in a plastic substrate. For the proposed pressure sensor, the embedded ITO is detached from its Mayan-pyramid-structured silicon mold by an environmentally friendly method which utilizes water-soluble sacrificial layers. The Mayan-pyramid-based pressure sensor is capable of six different pressure sensations with excellent sensitivity in the range of 100 Pa-10 kPa, high endurance of 105 cycles, and good pulse detection and tactile sensing data processing capabilities through machine learning (ML) algorithms for different surface textures. A 5 × 5-pixel pressure-temperature-based bimodal sensor array with a zigzag-shaped ITO temperature sensor on top of it is also demonstrated without a noticeable interface effect. This work demonstrates the potential to develop transparent bimodal sensors that can be employed for electronic skin (E-skin) applications.
- 1 October 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-11
Open AccessTransparent and Flexible Mayan-Pyramid-based Pressure Sensor using Facile-Transferred Indium tin Oxide for Bimodal Sensor Applications
Transparent and conducting flexible electrodes have been successfully developed over the last few decades due to their potential applications in optoelectronics. However, recent developments in smart electronics, such as a direct human-machine interface, health-monitoring devices, motion-tracking sensors, and artificially electronic skin also require materials with multifunctional properties such as transparency, flexibility and good portability. In such devices, there remains room to develop transparent and flexible devices such as pressure sensors or temperature sensors. Herein, we demonstrate a fully transparent and flexible bimodal sensor using indium tin oxide (ITO), which is embedded in a plastic substrate. For the proposed pressure sensor, the embedded ITO is detached from its Mayan-pyramid-structured silicon mold by an environmentally friendly method which utilizes water-soluble sacrificial layers. The Mayan-pyramid-based pressure sensor is capable of six different pressure sensations with excellent sensitivity in the range of 100 Pa-10 kPa, high endurance of 105 cycles, and good pulse detection and tactile sensing data processing capabilities through machine learning (ML) algorithms for different surface textures. A 5 × 5-pixel pressure-temperature-based bimodal sensor array with a zigzag-shaped ITO temperature sensor on top of it is also demonstrated without a noticeable interface effect. This work demonstrates the potential to develop transparent bimodal sensors that can be employed for electronic skin (E-skin) applications.
- 17 July 2018
- Published by IOP Publishing in Nanotechnology
- Vol. 29 (38) , 385207
Effect of dysprosium and lutetium metal buffer layers on the resistive switching characteristics of Cu–Sn alloy-based conductive-bridge random access memory
The conductive-bridge random access memory (CBRAM) has become one of the most suitable candidates for non-volatile memory in next-generation information and communication technology. The resistive switching (RS) mechanism of CBRAM depends on the formation/annihilation of the conductive filament (CF) between the active metal electrode and the inert electrode. However, excessive ion injection from the active electrode into the solid electrolyte reduces the uniformity and reliability of the RS devices. To solve this problem, we investigated the RS characteristics of a CuSn alloy active electrode with different compositions of Cu x –Sn 1–x (0.13 < X < 0.55). The RS characteristics were further improved by inserting a dysprosium (Dy) or lutetium (Lu) buffer layer at the interface of Cu x –Sn 1–x /Al 2 O 3 . Electrical analysis of the optimal Cu 0.4 –Sn 0.73 /Lu-based CBRAM exhibited stable RS behavior with low operation voltage (SET: 0.7 V and RESET: −0.3 V), a high on state/off state resistive ratio (10 6 ), AC cyclic endurance (>10 4 ), and stable retention (85 °C/10 years). To achieve these performance parameters, CFs were locally formed inside the electrolyte using a modified CuSn active electrode, and the amount of Cu-ion injection was reduced by inserting the Dy or Lu buffer layer between the CuSn active electrode and the electrolyte. In particular, conductive-atomic force microscopy results at the Dy or Lu/Al 2 O 3 interface directly showed and defined the diameter of the CF.
- 17 July 2018
- Published by IOP Publishing in Nanotechnology
- Vol. 29 (38) , 385207
Effect of dysprosium and lutetium metal buffer layers on the resistive switching characteristics of Cu–Sn alloy-based conductive-bridge random access memory
The conductive-bridge random access memory (CBRAM) has become one of the most suitable candidates for non-volatile memory in next-generation information and communication technology. The resistive switching (RS) mechanism of CBRAM depends on the formation/annihilation of the conductive filament (CF) between the active metal electrode and the inert electrode. However, excessive ion injection from the active electrode into the solid electrolyte reduces the uniformity and reliability of the RS devices. To solve this problem, we investigated the RS characteristics of a CuSn alloy active electrode with different compositions of Cu x –Sn 1–x (0.13 < X < 0.55). The RS characteristics were further improved by inserting a dysprosium (Dy) or lutetium (Lu) buffer layer at the interface of Cu x –Sn 1–x /Al 2 O 3 . Electrical analysis of the optimal Cu 0.4 –Sn 0.73 /Lu-based CBRAM exhibited stable RS behavior with low operation voltage (SET: 0.7 V and RESET: −0.3 V), a high on state/off state resistive ratio (10 6 ), AC cyclic endurance (>10 4 ), and stable retention (85 °C/10 years). To achieve these performance parameters, CFs were locally formed inside the electrolyte using a modified CuSn active electrode, and the amount of Cu-ion injection was reduced by inserting the Dy or Lu buffer layer between the CuSn active electrode and the electrolyte. In particular, conductive-atomic force microscopy results at the Dy or Lu/Al 2 O 3 interface directly showed and defined the diameter of the CF.
- 1 July 2018
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 753, 551-557
Resistive switching characteristics of a modified active electrode and Ti buffer layer in Cu Se-based atomic switch
- 1 July 2018
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 753, 551-557
Resistive switching characteristics of a modified active electrode and Ti buffer layer in Cu Se-based atomic switch