Microstructure and Elements Concentration of Inconel 713LC during Laser Powder Bed Fusion through a Modified Cellular Automaton Model
Authors:
Open Access
Abstract
In this study, a hybrid finite element (FE) and cellular automaton (CA) model is developed to explore crystallization behavior and alloying of Inconel713LC during Laser powder bed fusion. A cellular automaton model is considering the surface nucleation, equiaxed bulk nucleation, and grain growth kinetics. In addition, the equation for solute diffusion is coupled with a cellular automaton model to simulate the IN713LC elements segregation. During the phase change, the non-equilibrium segregation model is applied to insert the effect of ultra-fast solidification happening during LPBF. It is found that, during LPBF processing of IN713LC, the micro segregation of Nb, Ti, and C is accrued at the grain boundaries. It is further shown that the micro segregation intensity depends on the solidification speed, which is determined in turn by the laser heat input. In particular, a lower laser heat input increases the solidification speed and results in a more uniform solid phase, thereby reducing the risk of crack formation. Finally, using a comparison between simulation results and experimental observation, it was shown that the proposed model successfully predicts the bulk element concentration of IN713LC after laser melting.Keywords
Funding Information
- The Ministry of Science and Technology of Taiwan under (MOST 108-2218-E-006-026)
This publication has 39 references indexed in Scilit:
- Casting defects and high temperature fatigue life of IN 713LC superalloyInternational Journal of Fatigue, 2012
- Determination of thermophysical properties of high temperature alloy IN713LC by thermal analysisJournal of Thermal Analysis and Calorimetry, 2012
- The microstructure and mechanical properties of deposited-IN718 by selective laser meltingJournal of Alloys and Compounds, 2012
- Numerical simulation of solidification morphologies of Cu-0.6Cr casting alloy using modified cellular automaton modelTransactions of Nonferrous Metals Society of China, 2010
- The Prediction of the Emissivity and Thermal Conductivity of Powder BedsParticulate Science and Technology, 2004
- Laser cladding of turbine bladesSurface and Coatings Technology, 2000
- Dendrite growth at the limit of stability: tip radius and spacingActa Metallurgica, 1981
- Morphological stability of a solid particle growing from a binary alloy meltJournal of Crystal Growth, 1980
- An arbitrary Lagrangian-Eulerian computing method for all flow speedsJournal of Computational Physics, 1974
- The Beer-Lambert LawJournal of Chemical Education, 1962