Numerical Study of the Microflow Characteristics in a V-ball Valve
Open Access
- 4 February 2021
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 12 (2) , 155
Abstract
V-ball valves are widely applied in many process industries to regulate fluid flow, and they have advantages of good approximately equal percentage flow characteristics and easy maintenance. However, in some applications, the V-ball valve needs to have good performance under both large and extremely small flow coefficients. In this paper, the improvement of the original V-ball valve is made and the flow characteristics between the original and the improved V-ball valve are compared. Two types of small gaps are added to the original V-ball, namely the gap with an approximately rectangular port and the gap with an approximately triangular port. The effects of the structure and the dimension of the gap on flow characteristics are investigated. Results show that within the gap, the flow coefficient increases but the loss coefficient decreases as the valve opening increases, and the flow coefficient has an approximately linear relationship with the flow cross-area of the added gap. Results also show that under the same flow cross-area, the flow coefficient has a higher value if the distance between the gap and the ball center is greater or if the gap is an approximately rectangular port, while the loss coefficient has an opposite trend.Keywords
This publication has 28 references indexed in Scilit:
- Effects of the geometrical features of flow paths on the flow capacity of a control valve trimJournal of Petroleum Science and Engineering, 2019
- Design and Experimental Research of a Miniature Digital Hydraulic ValveMicromachines, 2018
- Effects of valve needle speed on flow characteristics in control valve for unit pump fuel systemAdvances in Mechanical Engineering, 2018
- Analysis of Flow forces in the initial phase of throttle gap opening in a proportional control valveFlow Measurement and Instrumentation, 2018
- Numerical simulation and experimental research of the flow force and forced vibration in the nozzle-flapper valveMechanical Systems and Signal Processing, 2018
- A Parametric Study of Hydrodynamic Cavitation Inside Globe ValvesJournal of Fluids Engineering, 2017
- Flow-induced vibration and noise in control valveProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2015
- Design of cages in globe valveProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2014
- Flow-induced vibration of a steam control valveJournal of Fluids and Structures, 2012
- Control of Volumetric Flow-Rate of Ball Valve Using V-PortJournal of Fluids Engineering, 2004