A comparative study on potentiodynamic and potentiostatic critical pitting temperature of austenitic stainless steels
- 16 August 2017
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 69 (1) , 44-52
Abstract
Temperature and potential effect on pitting occurrence of four austenitic stainless steels in 1 M sodium chloride solution are plotted, then the influence of scan rate and chloride concentration on potentiodynamic critical pitting temperature (CPT) are investigated. Basing on the independence and reliability analysis, the potentiodynamic CPT and potentiostatic CPT are compared. To improve the reproducibility of potentiostatic CPT, an elevated potential should be applied. On the other hand, crevice corrosion induced by transpassive etching is clarified, indicating the upper limit of applied potential in potentiostatic test. Consequently, a potential of 800 or 850 mV(SCE) is recommended for austenitic stainless steels. Additionally, regression analysis is carried out to confirm the linear relationship between potentiodynamic CPT and pitting resistance equivalent.Keywords
Funding Information
- National Natural Science Foundation of China (51371053, 51501041, 51671059)
This publication has 26 references indexed in Scilit:
- Effect of annealing temperature on the pitting corrosion resistance of super duplex stainless steel UNS S32750Materials Characterization, 2009
- Evaluation of localized corrosion in duplex stainless steel aged at 850°C with critical pitting temperature measurementElectrochimica Acta, 2009
- Understanding localized corrosionMaterials Today, 2008
- Influence of pH and Chloride Concentration on the Pitting and Crevice Corrosion Behavior of High-Alloy Stainless SteelsCorrosion, 2000
- Effects of Temperature and Thiosulfate on Chloride Pitting of Austenitic Stainless SteelsCorrosion, 1999
- Critical Pitting Temperatures in Sodium Chloride and Ferric Chloride Solutions - Determined Using the 'Avesta Cell'Materials Science Forum, 1998
- Pitting Corrosion of Metals: A Review of the Critical FactorsJournal of the Electrochemical Society, 1998
- Application of the Pitting Resistance Equivalent Concept to Some Highly Alloyed Austenitic Stainless SteelsCorrosion, 1998
- Investigation of the Applicability of some Pre Expressions for Austenitic Stainless SteelsMaterials Science Forum, 1992
- Pitting Resistance of 18% Cr Ferritic Stainless Steels Containing MolybdenumJournal of the Electrochemical Society, 1974