Pd/B_4C/Y multilayer coatings for extreme ultraviolet applications near 10 nm wavelength
Authors:
- 19 June 2015
- journal article
- Published by Optica Publishing Group in Applied Optics
- Vol. 54 (18) , 5850-5860
Abstract
A new extreme ultraviolet (EUV) multilayer coating has been developed comprising Pd and Y layers with thin B4C barrier layers at each interface, for normal incidence applications near 10 nm wavelength. Periodic, nonperiodic, and dual-stack coatings have been investigated and compared with similar structures comprising either Mo/Y or Pd/B4C bilayers. We find that Pd/B4C/Y multilayers provide higher reflectance than either Mo/Y or Pd/B4C, with much lower film stress than Pd/B4C. We have also investigated the performance of periodic multilayers comprising repetitions of Pd/Y, Ru/Y, or Ru/B4C/Y, as well as Pd/B4C multilayers deposited using reactive sputtering with an Ar:N2 gas mixture in order to reduce stress: these material combinations were all found to provide poor EUV performance. The temporal stability of a periodic Pd/B4C/Y multilayer stored in air was investigated over a period of 16 months, and a slight reduction in peak reflectance was observed. Periodic Pd/B4C/Y multilayers were also found to be thermally stable up to 100°C; at higher temperatures (200°C and 300°C) we observe a slight reduction in peak reflectance and a slight increase in multilayer period. High-resolution transmission electron microscopy and selected area diffraction of an as-deposited Pd/B4C/Y film indicates a fully amorphous structure, with interfaces that are both smoother and more abrupt than those observed in a comparable Pd/B4C multilayer in which the Pd layers are polycrystalline. The new Pd/B4C/Y multilayers are suitable for normal-incidence imaging and spectroscopy applications, including solar physics, plasma physics, high-brightness EUV light sources, and others.Keywords
Funding Information
- National Aeronautics and Space Administration (NASA) (NNG14PN04P, NNX13CM20P, NNX14AH64G)
This publication has 19 references indexed in Scilit:
- The High-Resolution Coronal Imager (Hi-C)Solar Physics, 2014
- Multisegmented, multilayer-coated mirrors for the Solar Ultraviolet ImagerOptical Engineering, 2013
- Extreme ultraviolet multilayer for the FERMI@Elettra free electron laser beam transport systemOptics Express, 2012
- The Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO)Solar Physics, 2011
- Structural characterization and lifetime stability of Mo/Y extreme-ultraviolet multilayer mirrorsApplied Optics, 2004
- Molybdenum–strontium multilayer mirrors for the 8–12-nm extreme-ultraviolet wavelength regionOptics Letters, 2001
- Survey of Ti-, B-, and Y-based soft x-ray–extreme ultraviolet multilayer mirrors for the 2- to 12-nm wavelength regionApplied Optics, 1996
- Fabrication of high-reflectance Mo–Si multilayer mirrors by planar-magnetron sputteringJournal of Vacuum Science & Technology A, 1991
- Normal-incidence x-ray mirror for 7 nmOptics Letters, 1991
- Solar-flare emission lines in the range from 66 to 171 A; transitions in highly ionized iron.The Astrophysical Journal, 1974