David L. Windt
David L. Windt has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
Eric M. Gullikson
Lawrence Berkeley National Laboratory
3 shared publications- Robert Hull
Rensselaer Polytechnic Institute, Troy, NY, USA
3 shared publications Christian Gollwitzer
Physikalisch-Technische Bundesanstalt (PTB)
2 shared publicationsChristian Laubis
Physikalisch-Technische Bundesanstalt (PTB)
2 shared publications- Eric M. Gullikson
Lawrence Berkeley National Laboratory
2 shared publications - James Paul Mason
Johns Hopkins University Applied Physics Laboratory
2 shared publications
Latest Publications
- Open Access
- 16 June 2026
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 29 (8)
X-ray reflection: A FLUKA model and its application in the design of synchrotron light beamlines and CERN’s Future Circular Collider
Relying on atomic-scattering factors from evaluated databases, a new model for the reflectivity of x-rays on solid surfaces has been developed for FLUKA v4-6.0. This model accounts for the variation of reflectivity as a function of the photon energy, its incidence angle, and linear polarization; surface-roughness effects are also taken into account. FLUKA reflectivities agree well with those obtained from state-of-the-art codes used for the characterization of optical devices, both for homogeneous solids and for multilayer mirrors. This new capability renders FLUKA a nearly one-stop shop for synchrotron radiation simulations: emission from bending magnets and wigglers, photon transport and interaction, electromagnetic (and hadronic when applicable) shower development in complex geometries, as well as x-ray reflection at designated solid surfaces, can now all be accounted for in a single FLUKA run. This streamlined FLUKA simulation workflow greatly simplifies the plethora of simulation tools that Monte Carlo practitioners previously needed to rely on. Two application scenarios of this new reflectivity model are showcased: first, the use of a multilayer mirror to deflect x-rays from an optical hutch onto an experimental hall at the MINERVA beamline of the ALBA synchrotron and second, the assessment of the photon flux near the interaction point at CERN’s Future Circular Collider (in its electron-positron stage) as a result of upstream x-ray reflections.
- 16 June 2026
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 29 (8)
Open AccessX-ray reflection: A FLUKA model and its application in the design of synchrotron light beamlines and CERN’s Future Circular Collider
Relying on atomic-scattering factors from evaluated databases, a new model for the reflectivity of x-rays on solid surfaces has been developed for FLUKA v4-6.0. This model accounts for the variation of reflectivity as a function of the photon energy, its incidence angle, and linear polarization; surface-roughness effects are also taken into account. FLUKA reflectivities agree well with those obtained from state-of-the-art codes used for the characterization of optical devices, both for homogeneous solids and for multilayer mirrors. This new capability renders FLUKA a nearly one-stop shop for synchrotron radiation simulations: emission from bending magnets and wigglers, photon transport and interaction, electromagnetic (and hadronic when applicable) shower development in complex geometries, as well as x-ray reflection at designated solid surfaces, can now all be accounted for in a single FLUKA run. This streamlined FLUKA simulation workflow greatly simplifies the plethora of simulation tools that Monte Carlo practitioners previously needed to rely on. Two application scenarios of this new reflectivity model are showcased: first, the use of a multilayer mirror to deflect x-rays from an optical hutch onto an experimental hall at the MINERVA beamline of the ALBA synchrotron and second, the assessment of the photon flux near the interaction point at CERN’s Future Circular Collider (in its electron-positron stage) as a result of upstream x-ray reflections.
- 21 August 2024
- Published by Optica Publishing Group in Applied Optics
- Vol. 63 (25) , 6532-6536
X-ray reflective coatings made of Pt, Al2O3/Pt, and Al2O3/Ni/Pt produced by atomic layer deposition
The X-ray reflectance of Pt-based coatings deposited by atomic layer deposition (ALD) has been measured in support of assessing the feasibility of using this deposition method for the production of X-ray mirror coatings that can achieve high X-ray reflectance without causing unacceptably large degradation of mirror figure as a result of coating stress-driven substrate deformation. Specifically, reflectance measurements of single-layer Pt, Al2O3/Pt bilayer, and Al2O3/Ni/Pt trilayer coatings grown by ALD on flat Si substrates were made using synchrotron radiation at X-ray energies in the range from 0.35 to 10 keV, revealing that the reflectance of the bilayers and trilayers is superior to that of single-layer sputtered Ir below 3.5 keV. Single-layer Pt and Al2O3/Pt bilayer coatings produced using thermal ALD were also deposited onto both the front and back surfaces of thin, figured, sub-arcsecond-quality X-ray telescope mirror segments made of polished, single-crystal Si, without discernible degradation of surface figure. These results, along with the successful implementation of batch-coating of two such mirrors simultaneously with high-reflectance coatings grown by thermal ALD, demonstrate the viability of employing stress-balanced, double-sided ALD coatings to mitigate substrate deformation resulting from film stress in high-reflectance coatings. This approach may thus enable the mass production of high-performance, sub-arcsecond X-ray telescope mirrors.
- 21 August 2024
- Published by Optica Publishing Group in Applied Optics
- Vol. 63 (25) , 6532-6536
X-ray reflective coatings made of Pt, Al2O3/Pt, and Al2O3/Ni/Pt produced by atomic layer deposition
The X-ray reflectance of Pt-based coatings deposited by atomic layer deposition (ALD) has been measured in support of assessing the feasibility of using this deposition method for the production of X-ray mirror coatings that can achieve high X-ray reflectance without causing unacceptably large degradation of mirror figure as a result of coating stress-driven substrate deformation. Specifically, reflectance measurements of single-layer Pt, Al2O3/Pt bilayer, and Al2O3/Ni/Pt trilayer coatings grown by ALD on flat Si substrates were made using synchrotron radiation at X-ray energies in the range from 0.35 to 10 keV, revealing that the reflectance of the bilayers and trilayers is superior to that of single-layer sputtered Ir below 3.5 keV. Single-layer Pt and Al2O3/Pt bilayer coatings produced using thermal ALD were also deposited onto both the front and back surfaces of thin, figured, sub-arcsecond-quality X-ray telescope mirror segments made of polished, single-crystal Si, without discernible degradation of surface figure. These results, along with the successful implementation of batch-coating of two such mirrors simultaneously with high-reflectance coatings grown by thermal ALD, demonstrate the viability of employing stress-balanced, double-sided ALD coatings to mitigate substrate deformation resulting from film stress in high-reflectance coatings. This approach may thus enable the mass production of high-performance, sub-arcsecond X-ray telescope mirrors.
- 11 December 2023
- Published by Optica Publishing Group in Applied Optics
- Vol. 62 (36) , 9568-9576
Bilayer and trilayer X-ray mirror coatings containing W, Pt, or Ir, in combination with C, C/Co, B4C, or B4C/Ni: X-ray reflectance, film stress, and temporal stability
X-ray reflectance and film stress were measured for 12 bilayer and trilayer reflective interference coatings and compared with a single-layer Ir coating. The interference coatings comprise a base layer of W, Pt, or Ir, top layers of either C or B4C, and, in the case of the trilayer coatings, middle layers of either Co or Ni. The coatings were deposited by magnetron sputtering. Film stress was measured using the wafer curvature technique, while X-ray reflectance was measured at grazing incidence over the ∼0.1−10keV energy band using synchrotron radiation. Re-measurements over a period of more than two years of both stress and X-ray reflectance were used to assess temporal stability. The X-ray reflectance of all 12 bilayer and trilayer coatings was found to be both stable over time and substantially higher than single-layer Ir over much of the energy range investigated, particularly below ∼4keV, except near the B and C K-edges, and the Co and Ni L-edges, where we observe sharp, narrow drops in reflectance due to photo-absorption in layers containing these materials. Film stress was found to be substantially smaller than single-layer Ir in all cases as well; however, film stress was also found to change over time for all coatings (including the single-layer Ir coating). The effective area of future X-ray telescopes will be substantially higher if these high reflectance bilayer and/or trilayer coatings are used in place of single-layer coatings. Additionally, the smaller film stresses found in the bilayer and trilayer coatings relative to single-layer Ir will reduce coating-stress-driven mirror deformations. Nevertheless, as all the interference films studied here have stresses that are far from zero (albeit smaller than that of single-layer Ir), methods to mitigate such deformations must be developed in order to construct high-angular-resolution telescopes using thin mirror segments. Furthermore, unless film stress can be sufficiently stabilized over time, perhaps through thermal annealing, any such mitigation methods must also account for the temporal instability of film stress that was found in all coatings investigated here.
- 11 December 2023
- Published by Optica Publishing Group in Applied Optics
- Vol. 62 (36) , 9568-9576
Bilayer and trilayer X-ray mirror coatings containing W, Pt, or Ir, in combination with C, C/Co, B4C, or B4C/Ni: X-ray reflectance, film stress, and temporal stability
X-ray reflectance and film stress were measured for 12 bilayer and trilayer reflective interference coatings and compared with a single-layer Ir coating. The interference coatings comprise a base layer of W, Pt, or Ir, top layers of either C or B4C, and, in the case of the trilayer coatings, middle layers of either Co or Ni. The coatings were deposited by magnetron sputtering. Film stress was measured using the wafer curvature technique, while X-ray reflectance was measured at grazing incidence over the ∼0.1−10keV energy band using synchrotron radiation. Re-measurements over a period of more than two years of both stress and X-ray reflectance were used to assess temporal stability. The X-ray reflectance of all 12 bilayer and trilayer coatings was found to be both stable over time and substantially higher than single-layer Ir over much of the energy range investigated, particularly below ∼4keV, except near the B and C K-edges, and the Co and Ni L-edges, where we observe sharp, narrow drops in reflectance due to photo-absorption in layers containing these materials. Film stress was found to be substantially smaller than single-layer Ir in all cases as well; however, film stress was also found to change over time for all coatings (including the single-layer Ir coating). The effective area of future X-ray telescopes will be substantially higher if these high reflectance bilayer and/or trilayer coatings are used in place of single-layer coatings. Additionally, the smaller film stresses found in the bilayer and trilayer coatings relative to single-layer Ir will reduce coating-stress-driven mirror deformations. Nevertheless, as all the interference films studied here have stresses that are far from zero (albeit smaller than that of single-layer Ir), methods to mitigate such deformations must be developed in order to construct high-angular-resolution telescopes using thin mirror segments. Furthermore, unless film stress can be sufficiently stabilized over time, perhaps through thermal annealing, any such mitigation methods must also account for the temporal instability of film stress that was found in all coatings investigated here.
- 24 August 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11821, 67-86
NExtUP: the Normal-incidence Extreme Ultraviolet Photometer
The Normal-incidence Extreme Ultraviolet Photometer (NExtUP) is a smallsat mission concept designed to measure the EUV radiation conditions of exoplanet host stars, and F-M type stars in general. EUV radiation is absorbed at high altitude in a planetary atmosphere, in the exosphere and upper thermosphere, where the gas can be readily heated to escape temperatures. EUV heating and ionization are the dominant atmospheric loss drivers during most of a planet’s life. There are only a handful of accurately measured EUV stellar fluxes, all dating from Extreme Ultraviolet Explorer (EUVE) observations in the ‘90s. Consequently, current models of stellar EUV emission are uncertain by more than an order of magnitude and dominate uncertainties in planetary atmospheric loss models. NExtUP will use periodic and aperiodic multilayers on off-axis parabolic mirrors and a prime focus microchannel plate detector to image stars in 5 bandpasses between 150 and 900°A down to flux limits two orders of magnitude lower than reached by EUVE. NExtUP may also accomplish a compelling array of secondary science goals, including using line-of-sight absorption measurements to understand the structure of the local interstellar medium, and imaging EUV emission from energetic processes on solar system objects at unprecedented spatial resolution. NExtUP is well within smallsat weight limits, requires no special orbital conditions, and would be flown on a spacecraft supplied by MOOG Industries. It draws on decades of mission heritage expertise at SAO and LASP, including similar instruments successfully launched and operated to observe the Sun.
- 24 August 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11821, 67-86
NExtUP: the Normal-incidence Extreme Ultraviolet Photometer
The Normal-incidence Extreme Ultraviolet Photometer (NExtUP) is a smallsat mission concept designed to measure the EUV radiation conditions of exoplanet host stars, and F-M type stars in general. EUV radiation is absorbed at high altitude in a planetary atmosphere, in the exosphere and upper thermosphere, where the gas can be readily heated to escape temperatures. EUV heating and ionization are the dominant atmospheric loss drivers during most of a planet’s life. There are only a handful of accurately measured EUV stellar fluxes, all dating from Extreme Ultraviolet Explorer (EUVE) observations in the ‘90s. Consequently, current models of stellar EUV emission are uncertain by more than an order of magnitude and dominate uncertainties in planetary atmospheric loss models. NExtUP will use periodic and aperiodic multilayers on off-axis parabolic mirrors and a prime focus microchannel plate detector to image stars in 5 bandpasses between 150 and 900°A down to flux limits two orders of magnitude lower than reached by EUVE. NExtUP may also accomplish a compelling array of secondary science goals, including using line-of-sight absorption measurements to understand the structure of the local interstellar medium, and imaging EUV emission from energetic processes on solar system objects at unprecedented spatial resolution. NExtUP is well within smallsat weight limits, requires no special orbital conditions, and would be flown on a spacecraft supplied by MOOG Industries. It draws on decades of mission heritage expertise at SAO and LASP, including similar instruments successfully launched and operated to observe the Sun.
- Open Access
- 1 March 2021
- Published by EDP Sciences in Journal of Space Weather and Space Climate
- Vol. 11, 20
SunCET: The Sun Coronal Ejection Tracker Concept
The Sun Coronal Ejection Tracker (SunCET) is an extreme ultraviolet imager and spectrograph instrument concept for tracking coronal mass ejections through the region where they experience the majority of their acceleration: the difficult-to-observe middle corona. It contains a wide field of view (0–4 R⊙) imager and a 1 Å spectral-resolution-irradiance spectrograph spanning 170–340 Å. It leverages new detector technology to read out different areas of the detector with different integration times, resulting in what we call “simultaneous high dynamic range”, as opposed to the traditional high dynamic range camera technique of subsequent full-frame images that are then combined in post-processing. This allows us to image the bright solar disk with short integration time, the middle corona with a long integration time, and the spectra with their own, independent integration time. Thus, SunCET does not require the use of an opaque or filtered occulter. SunCET is also compact – ~15 × 15 × 10 cm in volume – making it an ideal instrument for a CubeSat or a small, complementary addition to a larger mission. Indeed, SunCET is presently in a NASA-funded, competitive Phase A as a CubeSat and has also been proposed to NASA as an instrument onboard a 184 kg Mission of Opportunity.
- 1 March 2021
- Published by EDP Sciences in Journal of Space Weather and Space Climate
- Vol. 11, 20
Open AccessSunCET: The Sun Coronal Ejection Tracker Concept
The Sun Coronal Ejection Tracker (SunCET) is an extreme ultraviolet imager and spectrograph instrument concept for tracking coronal mass ejections through the region where they experience the majority of their acceleration: the difficult-to-observe middle corona. It contains a wide field of view (0–4 R⊙) imager and a 1 Å spectral-resolution-irradiance spectrograph spanning 170–340 Å. It leverages new detector technology to read out different areas of the detector with different integration times, resulting in what we call “simultaneous high dynamic range”, as opposed to the traditional high dynamic range camera technique of subsequent full-frame images that are then combined in post-processing. This allows us to image the bright solar disk with short integration time, the middle corona with a long integration time, and the spectra with their own, independent integration time. Thus, SunCET does not require the use of an opaque or filtered occulter. SunCET is also compact – ~15 × 15 × 10 cm in volume – making it an ideal instrument for a CubeSat or a small, complementary addition to a larger mission. Indeed, SunCET is presently in a NASA-funded, competitive Phase A as a CubeSat and has also been proposed to NASA as an instrument onboard a 184 kg Mission of Opportunity.
- 1 August 2018
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 89 (8) , 083702
Monochromatic mammography using scanning multilayer X-ray mirrors
A prototype system for breast imaging using monochromatic X-rays has been developed using a scanning multilayer X-ray mirror in combination with a conventional mammography tube and an imaging detector. The X-ray mirror produces a monochromatic fan beam tuned near 19 keV, with an energy bandpass of approximately 1.5 keV. Rotating the mirror about the tube’s focal spot in synchronization with the X-ray generator and detector enables the acquisition of monochromatic X-ray images over large areas. The X-ray mirror also can be rotated completely out of the beam so that conventional polychromatic images can be acquired using a K-edge filter, facilitating direct comparison between the two modes of operation. The system was used to image synthetic, tissue-equivalent breast phantoms in order to experimentally quantify the improvements in image quality and dose that can be realized using monochromatic radiation. Nine custom phantoms spanning a range of thicknesses and glandular/adipose ratios, each containing both glandular- and calcification-equivalent features, were used to measure the contrast and signal-difference-to-noise ratio (SDNR). Mean glandular dose (MGD) was computed from measured entrance exposure, and a figure-of-merit (FOM) was computed as FOM = SDNR2/MGD in each case. Monochromatic MGD ranges from 0.606 to 0.134 of polychromatic MGD for images having comparable glandular SDNR, depending on breast thickness and glandularity; relative monochromatic dose decreases with increasing glandularity for all thicknesses. Monochromatic FOM values are higher than the corresponding polychromatic FOM values in all but one case. Additionally, the monochromatic contrast for glandular features is higher than the polychromatic contrast in all but one case as well. These results represent important steps toward the realization of clinically practical monochromatic X-ray breast imaging systems having lower dose and better image quality, including those for digital mammography, digital breast tomosynthesis, contrast-enhanced spectral mammography and other modalities, for safer, more accurate breast cancer detection, diagnosis and staging.
- 1 August 2018
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 89 (8) , 083702
Monochromatic mammography using scanning multilayer X-ray mirrors
A prototype system for breast imaging using monochromatic X-rays has been developed using a scanning multilayer X-ray mirror in combination with a conventional mammography tube and an imaging detector. The X-ray mirror produces a monochromatic fan beam tuned near 19 keV, with an energy bandpass of approximately 1.5 keV. Rotating the mirror about the tube’s focal spot in synchronization with the X-ray generator and detector enables the acquisition of monochromatic X-ray images over large areas. The X-ray mirror also can be rotated completely out of the beam so that conventional polychromatic images can be acquired using a K-edge filter, facilitating direct comparison between the two modes of operation. The system was used to image synthetic, tissue-equivalent breast phantoms in order to experimentally quantify the improvements in image quality and dose that can be realized using monochromatic radiation. Nine custom phantoms spanning a range of thicknesses and glandular/adipose ratios, each containing both glandular- and calcification-equivalent features, were used to measure the contrast and signal-difference-to-noise ratio (SDNR). Mean glandular dose (MGD) was computed from measured entrance exposure, and a figure-of-merit (FOM) was computed as FOM = SDNR2/MGD in each case. Monochromatic MGD ranges from 0.606 to 0.134 of polychromatic MGD for images having comparable glandular SDNR, depending on breast thickness and glandularity; relative monochromatic dose decreases with increasing glandularity for all thicknesses. Monochromatic FOM values are higher than the corresponding polychromatic FOM values in all but one case. Additionally, the monochromatic contrast for glandular features is higher than the polychromatic contrast in all but one case as well. These results represent important steps toward the realization of clinically practical monochromatic X-ray breast imaging systems having lower dose and better image quality, including those for digital mammography, digital breast tomosynthesis, contrast-enhanced spectral mammography and other modalities, for safer, more accurate breast cancer detection, diagnosis and staging.
- Open Access
- 29 August 2017
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10397, 21
The rocket experiment demonstration of a soft x-ray polarimeter (REDSoX Polarimeter)
The Rocket Experiment Demonstration of a Soft X-ray Polarimeter (REDSoX Polarimeter) is a sounding rocket instrument that can make the first measurement of the linear X-ray polarization of an extragalactic source in the 0.2-0.8 keV band as low as 10%. We employ multilayer-coated mirrors as Bragg reflectors at the Brewster angle. By matching the dispersion of a spectrometer using replicated optics from MSFC and critical angle transmission gratings from MIT to three laterally graded multilayer mirrors (LGMLs), we achieve polarization modulation factors over 90%. We present a novel arrangement of gratings, designed optimally for the purpose of polarimetry with a converging beam. The entrance aperture is divided into six equal sectors; pairs of blazed gratings from opposite sectors are oriented to disperse to the same LGML. The LGML position angles are 120 degrees to each other. CCD detectors then measure the intensities of the dispersed spectra after reflection and polarizing by the LGMLs, giving the three Stokes parameters needed to determine a source’s linear polarization fraction and orientation. A current grant is funding further development to improve the LGMLs. Sample gratings for the project have been fabricated at MIT and the development team continues to improve them under separate funding. Our technological approach is the basis for a possible orbital mission
- 29 August 2017
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10397, 21
Open AccessThe rocket experiment demonstration of a soft x-ray polarimeter (REDSoX Polarimeter)
The Rocket Experiment Demonstration of a Soft X-ray Polarimeter (REDSoX Polarimeter) is a sounding rocket instrument that can make the first measurement of the linear X-ray polarization of an extragalactic source in the 0.2-0.8 keV band as low as 10%. We employ multilayer-coated mirrors as Bragg reflectors at the Brewster angle. By matching the dispersion of a spectrometer using replicated optics from MSFC and critical angle transmission gratings from MIT to three laterally graded multilayer mirrors (LGMLs), we achieve polarization modulation factors over 90%. We present a novel arrangement of gratings, designed optimally for the purpose of polarimetry with a converging beam. The entrance aperture is divided into six equal sectors; pairs of blazed gratings from opposite sectors are oriented to disperse to the same LGML. The LGML position angles are 120 degrees to each other. CCD detectors then measure the intensities of the dispersed spectra after reflection and polarizing by the LGMLs, giving the three Stokes parameters needed to determine a source’s linear polarization fraction and orientation. A current grant is funding further development to improve the LGMLs. Sample gratings for the project have been fabricated at MIT and the development team continues to improve them under separate funding. Our technological approach is the basis for a possible orbital mission
- 19 June 2015
- Published by Optica Publishing Group in Applied Optics
- Vol. 54 (18) , 5850-5860
Pd/B_4C/Y multilayer coatings for extreme ultraviolet applications near 10 nm wavelength
A new extreme ultraviolet (EUV) multilayer coating has been developed comprising Pd and Y layers with thin B4C barrier layers at each interface, for normal incidence applications near 10 nm wavelength. Periodic, nonperiodic, and dual-stack coatings have been investigated and compared with similar structures comprising either Mo/Y or Pd/B4C bilayers. We find that Pd/B4C/Y multilayers provide higher reflectance than either Mo/Y or Pd/B4C, with much lower film stress than Pd/B4C. We have also investigated the performance of periodic multilayers comprising repetitions of Pd/Y, Ru/Y, or Ru/B4C/Y, as well as Pd/B4C multilayers deposited using reactive sputtering with an Ar:N2 gas mixture in order to reduce stress: these material combinations were all found to provide poor EUV performance. The temporal stability of a periodic Pd/B4C/Y multilayer stored in air was investigated over a period of 16 months, and a slight reduction in peak reflectance was observed. Periodic Pd/B4C/Y multilayers were also found to be thermally stable up to 100°C; at higher temperatures (200°C and 300°C) we observe a slight reduction in peak reflectance and a slight increase in multilayer period. High-resolution transmission electron microscopy and selected area diffraction of an as-deposited Pd/B4C/Y film indicates a fully amorphous structure, with interfaces that are both smoother and more abrupt than those observed in a comparable Pd/B4C multilayer in which the Pd layers are polycrystalline. The new Pd/B4C/Y multilayers are suitable for normal-incidence imaging and spectroscopy applications, including solar physics, plasma physics, high-brightness EUV light sources, and others.
- 19 June 2015
- Published by Optica Publishing Group in Applied Optics
- Vol. 54 (18) , 5850-5860
Pd/B_4C/Y multilayer coatings for extreme ultraviolet applications near 10 nm wavelength
A new extreme ultraviolet (EUV) multilayer coating has been developed comprising Pd and Y layers with thin B4C barrier layers at each interface, for normal incidence applications near 10 nm wavelength. Periodic, nonperiodic, and dual-stack coatings have been investigated and compared with similar structures comprising either Mo/Y or Pd/B4C bilayers. We find that Pd/B4C/Y multilayers provide higher reflectance than either Mo/Y or Pd/B4C, with much lower film stress than Pd/B4C. We have also investigated the performance of periodic multilayers comprising repetitions of Pd/Y, Ru/Y, or Ru/B4C/Y, as well as Pd/B4C multilayers deposited using reactive sputtering with an Ar:N2 gas mixture in order to reduce stress: these material combinations were all found to provide poor EUV performance. The temporal stability of a periodic Pd/B4C/Y multilayer stored in air was investigated over a period of 16 months, and a slight reduction in peak reflectance was observed. Periodic Pd/B4C/Y multilayers were also found to be thermally stable up to 100°C; at higher temperatures (200°C and 300°C) we observe a slight reduction in peak reflectance and a slight increase in multilayer period. High-resolution transmission electron microscopy and selected area diffraction of an as-deposited Pd/B4C/Y film indicates a fully amorphous structure, with interfaces that are both smoother and more abrupt than those observed in a comparable Pd/B4C multilayer in which the Pd layers are polycrystalline. The new Pd/B4C/Y multilayers are suitable for normal-incidence imaging and spectroscopy applications, including solar physics, plasma physics, high-brightness EUV light sources, and others.
- 1 October 2009
- Published by Optica Publishing Group in Applied Optics
- Vol. 48 (29) , 5502-5508
Performance optimization of Si/Gd extreme ultraviolet multilayers
We compare the performance, stability and microstructure of Si/Gd multilayers containing thin barrier layers of W, , or , and determine that multilayers containing thick W barrier layers at each interface provide the best compromise between high peak reflectance in the extreme ultraviolet near and good stability upon heating. The Si/W/Gd films have sharper interfaces and also show vastly superior thermal stability relative to Si/Gd multilayers without barrier layers. We find that these structures have relatively small compressive film stresses, and show good temporal stability thus far. We measured a peak reflectance of 29.7% at , and a spectral bandpass of (FWHM), for an optimized Si/W/Gd multilayer having a period .- 1 October 2009
- Published by Optica Publishing Group in Applied Optics
- Vol. 48 (29) , 5502-5508
Performance optimization of Si/Gd extreme ultraviolet multilayers
We compare the performance, stability and microstructure of Si/Gd multilayers containing thin barrier layers of W, , or , and determine that multilayers containing thick W barrier layers at each interface provide the best compromise between high peak reflectance in the extreme ultraviolet near and good stability upon heating. The Si/W/Gd films have sharper interfaces and also show vastly superior thermal stability relative to Si/Gd multilayers without barrier layers. We find that these structures have relatively small compressive film stresses, and show good temporal stability thus far. We measured a peak reflectance of 29.7% at , and a spectral bandpass of (FWHM), for an optimized Si/W/Gd multilayer having a period .- 1 September 2009
- Published by Optica Publishing Group in Applied Optics
- Vol. 48 (26) , 4932-4941
Performance, structure, and stability of SiC/Al multilayer films for extreme ultraviolet applications
We report on the performance, structure and stability of periodic multilayer films containing silicon carbide (SiC) and aluminum (Al) layers designed for use as reflective coatings in the extreme ultraviolet (EUV). We find that SiC/Al multilayers prepared by magnetron sputtering have low stress, good temporal and thermal stability, and provide good performance in the EUV, particularly for applications requiring a narrow spectral bandpass, such as monochromatic solar imaging. Transmission electron microscopy reveals amorphous SiC layers and polycrystalline Al layers having a strong texture, and relatively large roughness associated with the Al crystallites. Fits to EUV reflectance measurements also indicate large interface widths, consistent with the electron microscopy results. SiC/Al multilayers deposited by reactive sputtering with nitrogen comprise Al layers that are nearly amorphous and consid erably smoother than films deposited nonreactively, but no improvements in EUV reflectance were obtained.- 1 September 2009
- Published by Optica Publishing Group in Applied Optics
- Vol. 48 (26) , 4932-4941
Performance, structure, and stability of SiC/Al multilayer films for extreme ultraviolet applications
We report on the performance, structure and stability of periodic multilayer films containing silicon carbide (SiC) and aluminum (Al) layers designed for use as reflective coatings in the extreme ultraviolet (EUV). We find that SiC/Al multilayers prepared by magnetron sputtering have low stress, good temporal and thermal stability, and provide good performance in the EUV, particularly for applications requiring a narrow spectral bandpass, such as monochromatic solar imaging. Transmission electron microscopy reveals amorphous SiC layers and polycrystalline Al layers having a strong texture, and relatively large roughness associated with the Al crystallites. Fits to EUV reflectance measurements also indicate large interface widths, consistent with the electron microscopy results. SiC/Al multilayers deposited by reactive sputtering with nitrogen comprise Al layers that are nearly amorphous and consid erably smoother than films deposited nonreactively, but no improvements in EUV reflectance were obtained.