Three-Legged Compliant Parallel Mechanisms: Fundamental Design Criteria to Achieve Fully Decoupled Motion Characteristics and a State-of-the-Art Review
Open Access
- 22 April 2022
- journal article
- review article
- Published by MDPI AG in Mathematics
- Vol. 10 (9) , 1414
Abstract
A three-legged compliant parallel mechanism (3L-CPM) achieves fully decoupled motions when its theoretical 6 × 6 stiffness/compliance matrix is a diagonal matrix, which only contains diagonal components, while all non-diagonal components are zeros. Because the motion decoupling capability of 3L-CPMs is essential in the precision engineering field, this paper presents the fundamental criteria for designing 3L-CPMs with fully decoupled motions, regardless of degrees-of-freedom and the types of flexure element. The 6 × 6 stiffness matrix of a general 3L-CPM is derived based on the orientation of each flexure element, e.g., thin/slender beam and notch hinge, etc., and its relative position to the moving platform. Based on an analytical solution, several requirements for the flexure elements were identified and needed to be satisfied in order to design a 3L-CPM with a diagonal stiffness/compliance matrix. In addition, the developed design criteria were used to analyze the decoupled-motion capability of some existing 3L-CPM designs and shown to provide insight into the motion characteristics of any 3L-CPM.Keywords
Funding Information
- Vietnam National University HoChiMinh City (VNU-HCM) (C2020-20-01)
This publication has 57 references indexed in Scilit:
- Optimal Design, Fabrication, and Control of an $XY$ Micropositioning Stage Driven by Electromagnetic ActuatorsIEEE Transactions on Industrial Electronics, 2012
- Optimal design of a 3-PUPU parallel robot with compliant hinges for micromanipulation in a cubic workspaceRobotics and Computer-Integrated Manufacturing, 2011
- Six-DOF micro-manipulator based on compliant parallel mechanism with integrated force sensorRobotics and Computer-Integrated Manufacturing, 2011
- Kinetostatic modeling of 3-RRR compliant micro-motion stages with flexure hingesMechanism and Machine Theory, 2009
- A SOI-MEMS-based 3-DOF planar parallel-kinematics nanopositioning stageSensors and Actuators A: Physical, 2008
- Kinematic design of large displacement precision XY positioning stage by using cross strip flexure joints and over-constrained mechanismMechanism and Machine Theory, 2008
- Input coupling analysis and optimal design of a 3-DOF compliant micro-positioning stageMechanism and Machine Theory, 2008
- A three‐DOF compliant micromotion stage with flexure hingesIndustrial Robot: the international journal of robotics research and application, 2004
- Design and experiment of a 3-dof parallel micromechanism utilizing flexure hingesIEEE Transactions on Robotics and Automation, 2003
- A three-degrees-of-freedom micromotion in-parallel actuated manipulatorIEEE Transactions on Robotics and Automation, 1991