SYSong Huat Yeo

Song Huat Yeo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Song Huat Yeo has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimization of Desired Multiple Resonant Modes of Compliant Parallel Mechanism Using Specific Frequency Range and Targeted Ratios

    by Vin Low, Song Huat Yeo, Minh Tuan Pham

    In this paper, a dynamic optimization method capable of optimizing the dynamic responses of a compliant parallel mechanism (CPM), in terms of its multiple primary resonant modes, is presented. A novel two-term objective function is formulated based on the specific frequency range and targeted ratios. The first term of the function is used to optimize the first resonant mode of the CPM, within a specific frequency range. The obtained frequency value of the first mode is used in the second term to define the remaining resonant modes to be optimized in terms of targeted ratios. Using the proposed objective function, the resonant modes of a CPM can be customized for a specific purpose, overcoming the limitations of existing methods. A 6-degree-of-freedom (DoF) CPM with decoupled motion is synthesized, monolithically prototyped, and investigated experimentally to demonstrate the effectiveness of the proposed function. The experimental results showed that the objective function is capable of optimizing the six resonant modes within the desired frequency range and the targeted ratios. The highest deviation between the experimental results and the predictions among the six resonant modes is found to be 9.42%, while the highest deviation in the compliances is 10.77%. The ranges of motions are found to be 10.0 mm in the translations, and 10.8° in the rotations.

  • Open Access

    Synthesis of Compliant Parallel Mechanisms Using an Improved Beam-Based Method with the Optimization of Multiple Resonant Modes

    by Vin Low, Song Huat Yeo, Minh Tuan Pham

    This paper proposes an improved beam-based method to synthesize a compliant parallel mechanism (CPM) with multiple degrees of freedom (DoFs). The proposed method utilizes a structural optimization technique to synthesize a three-legged CPM with a single-beam structure constructed by two perpendicular segments in each leg to achieve the desired DoFs and fully decoupled motion. In addition, an objective function is proposed to optimize the primary resonant frequencies in actuating directions to targeted values to achieve the desired dynamic behaviors. A 4-DoF CPM, with one translation and three rotations, is synthesized using the improved beam-based method and all of the primary resonant frequencies are optimized to the targeted values. The 4-DoF CPM prototype is fabricated monolithically and evaluated experimentally in terms of its mechanical characteristics, workspace, and resonant modes. The obtained results show that the experimental stiffness and dynamic properties agree with the predictions. In particular, the prototype has good motion decoupling capability, as reflected by the high stiffness ratios of more than 500 between the non-actuating and actuating directions; the large workspaces of up to 4.0 mm and 7.2° for the translation and rotations, respectively; and the resonant frequencies being close to the targeted ones. In addition, the highest deviations between the predicted and experimental results are 9.49% and 9.13% for the stiffness and dynamic behaviors, respectively, demonstrating the correctness and effectiveness of the proposed method.


  • Open Access

    Three-Legged Compliant Parallel Mechanisms: Fundamental Design Criteria to Achieve Fully Decoupled Motion Characteristics and a State-of-the-Art Review

    by Minh Tuan Pham, Song Huat Yeo, Tat Joo Teo

    A three-legged compliant parallel mechanism (3L-CPM) achieves fully decoupled motions when its theoretical 6 × 6 stiffness/compliance matrix is a diagonal matrix, which only contains diagonal components, while all non-diagonal components are zeros. Because the motion decoupling capability of 3L-CPMs is essential in the precision engineering field, this paper presents the fundamental criteria for designing 3L-CPMs with fully decoupled motions, regardless of degrees-of-freedom and the types of flexure element. The 6 × 6 stiffness matrix of a general 3L-CPM is derived based on the orientation of each flexure element, e.g., thin/slender beam and notch hinge, etc., and its relative position to the moving platform. Based on an analytical solution, several requirements for the flexure elements were identified and needed to be satisfied in order to design a 3L-CPM with a diagonal stiffness/compliance matrix. In addition, the developed design criteria were used to analyze the decoupled-motion capability of some existing 3L-CPM designs and shown to provide insight into the motion characteristics of any 3L-CPM.


  • Open Access

    A Decoupled 6-DOF Compliant Parallel Mechanism with Optimized Dynamic Characteristics Using Cellular Structure

    by Minh Tuan Pham, Song Huat Yeo, Tat Joo Teo, Pan Wang, Mui Ling Sharon Nai

    This paper presents a novel six degrees-of-freedom (DOF) compliant parallel mechanism (CPM) with decoupled output motions, large workspace of ≥6 mm for translations and ≥12° for rotations, optimized stiffness, and dynamic properties. The working range and the motion decoupling capability of the six-DOF CPM are experimentally verified, and the mechanical properties are shown to be predictable. The proposed CPM is synthesized by applying the beam-based structural optimization method together with the criteria for achieving motion decoupling capability. In order to improve the dynamic behaviors for the CPM, cellular structure is used to design its end effector. The obtained results show that the dynamic performance of the CPM with cellular end effector is significantly enhanced with the increase of 33% of the first resonance frequency as compared to the initial design. Performances of the three-dimensional (3D)-printed prototype are experimentally evaluated in terms of mechanical characteristics and decoupled motions. The obtained results show that the actual stiffness and dynamic properties agree with the predictions with the highest deviation of ~10.5%. The motion decoupling capability of the CPM is also demonstrated since almost input energy (>99.5%) generates the desired output motions while the energy causes parasitic motions is only minor (<0.5%).


  • Design of Robots Used as Education Companion and Tutor

    by Albert Causo, Giang Truong Vo, I-Ming Chen, Song Huat Yeo


  • Cable-Driven Robots

    by Shabbir Kurbanhusen Mustafa, Wen Bin Lim, Guilin Yang, Song Huat Yeo, Wei Lin, Sunil Kumar Agrawal


  • Cable-Driven Robots

    by Shabbir Kurbanhusen Mustafa, Wen Bin Lim, Guilin Yang, Song Huat Yeo, Wei Lin, Sunil Kumar Agrawal


  • Self-Identification of the Joint Centre of a Cable-Driven Shoulder Rehabilitator

    by Shabbir Kurbanhusen Mustafa, Guilin Yang, Song Huat Yeo, Wei Lin

    This paper presents the joint centre self-identification of a novel cable-driven anthropocentric shoulder rehabilitator. For such a wearable rehabilitator, identification of joint centre is critical for kinematic modeling, path planning and motion control. However, the shoulder joint centre location is unknown when a user wears this rehabilitator and it differs among users. These complicate the initial patient preparatory. A joint centre self-identification model is formulated based on the differential change in the cable end-point distance. A computationally effective algorithm is employed to identify the shoulder joint centre. It does not require any external measurement devices because of the redundant actuation scheme in the cable-driven shoulder rehabilitator. In order to verify the effectiveness and robustness of the proposed algorithm, we conducted computer simulation studies. In the simulation example, although large errors (up to plusmn50mm) had been injected into the initial estimates, the joint centre was always accurately identified within four to five iterations.


  • Development of a Bio-Inspired Wrist Prosthesis

    by Shabbir Kurbanhusen Mustafa, Guilin Yang, Song Huat Yeo, Wei Lin, Cong Bang Pham

    This paper presents a novel mechanical design of a 3-DOF wrist prosthesis. Mimicking biological solutions from the human arm anatomy, the wrist prosthesis is designed to have a parallel structure and is cable-driven. This results in a much lighter prosthesis, with higher loading capacity as compared to a rigid-linked, serial structured design. Based on the wrist joint capabilities, this paper focuses on the cable tension, stiffness and workspace analyses. This is to develop a comprehensive framework to optimize the wrist prosthesis design. Finally, a prototype is fabricated based on the optimization results