Design of Multilayer Concentric Ferrite-Magnet Machines for a Traction Application
- 4 December 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 7 (3) , 1548-1560
Abstract
This paper proposes two different interior permanent magnet (IPM) motor-generator designs for a hybrid electric vehicle application. The paper shows the trade-offs, merits, and demerits of two feasible designs of ferrite-magnet machines for such an application. Both designs use multilayer concentric ferrite magnets. They use different winding topologies: 48-slot 8-pole (48/8) integral-slot and 60/8 fractional-slot topologies. The width, length, and location of the embedded rotor magnets, in addition to the shape of the flux barriers, are optimized to achieve the required performance within the given constraints. The torque ripple of both designs is kept below 5 % at the base-speed operating point without applying skewing. The electromagnetic performance characteristics of both designs at the base-speed and maximum-speed operating points are presented. The efficiency maps of both designs throughout the entire speed range are also investigated. Moreover, the paper presents an irreversible demagnetization analysis of the utilized ferrite magnets at different operating conditions. Spin analysis is performed to study the structural integrity of the proposed designs. Experimental results of both machines are provided for validation.Keywords
Funding Information
- Canada Excellence Research Chairs Program
- Natural Sciences and Engineering Research Council of Canada
- Automotive Partnership Canada (APC) Initiative
- Fiat-Chrysler Automobiles
This publication has 23 references indexed in Scilit:
- Optimal Design of an Inset PM Motor With Assisted Barriers and Magnet Shifting for Improvement of Torque CharacteristicsIEEE Transactions on Magnetics, 2017
- Efficient Utilization of Rare Earth Permanent-Magnet Materials and Torque Ripple Reduction in Interior Permanent-Magnet MachinesIEEE Transactions on Industry Applications, 2017
- Design and Comparison of Interior Permanent Magnet Motor Topologies for Traction ApplicationsIEEE Transactions on Transportation Electrification, 2016
- Large-Scale Design Optimization of PM Machines Over a Target Operating CycleIEEE Transactions on Industry Applications, 2016
- Next generation chevy volt electric machines; design, optimization and control for performance and rare-earth mitigation2015
- Low-Cost Ferrite PM-Assisted Synchronous Reluctance Machine for Electric VehiclesIEEE Transactions on Industrial Electronics, 2014
- Investigation and Experimental Verification of a Novel Spoke-Type Ferrite-Magnet Motor for Electric-Vehicle Traction Drive ApplicationsIEEE Transactions on Industrial Electronics, 2014
- Experimental Evaluation of a Rare-Earth-Free PMASynRM With Ferrite Magnets for Automotive ApplicationsIEEE Transactions on Industrial Electronics, 2014
- Interior PM machines using Ferrite to substitute rare-earth surface PM machines2012
- Novel Double-Barrier Rotor Designs in Interior-PM Motor for Reducing Torque PulsationIEEE Transactions on Magnetics, 2010