Jianbin Liang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jianbin Liang has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Ali Emadi
Department of Electrical and Computer Engineering and McMaster Automotive Resource Centre (MARC), McMaster University, Hamilton, ON L8S 4L8, Canada
11 shared publications - Berker Bilgin
McMaster Automotive Resource Centre (MARC), McMaster University, Hamilton, ON L8S 4L8, Canada
11 shared publications - Alan Dorneles Callegaro
McMaster Automotive Resource Centre, McMaster University, Hamilton, ON, Canada
5 shared publications - James Weisheng Jiang
McMaster Automotive Resource Centre
4 shared publications - Brock Howey
McMaster Automotive Resource Centre, McMaster University, Hamilton, ON, Canada
3 shared publications - Jianning Dong
DC System, Energy Conversion and Storage (DCES) Group, Faculty of Electrical Engineering, Mathematics and Computer Science (EEMCS), Delft University of Technology, Delft, CP, The Netherlands
3 shared publications
Latest Publications
- Open Access
- 6 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Industry Applications
- Vol. 2, 70-81
Analytical Calculation of Temporal and Circumferential Orders of Radial Force Density Harmonics in External-Rotor and Internal-Rotor Switched Reluctance Machines
This paper presents an analytical method to calculate the temporal and circumferential orders of the radial force density harmonics in switched reluctance machines(SRMs) without running the electromagnetic finite element analysis (FEA). The characteristics of the radial force density harmonics in several SRM topologies are investigated, including the 6/4, 24/16, and 6/14 internal-rotor (IR) SRMs, and 12/16 and 18/24 external-rotor(ER) SRM. The study shows that the temporal and circumferential orders of the radial force density harmonics depend on the pole configuration, the rotational directions of the rotor, the phase excitation sequence, and the rotor or stator radial force density waveform. The acoustic noise of a four-phase 8/6 internal-rotor SRM and a three-phase 12/16 external-rotor SRM was experimentally measured to validate the calculation of the temporal and circumferential orders of the radial force density harmonics. The proposed analytical method helps locate the possible radial force density harmonics of a given SRM configuration. In order to determine the dominant radial force harmonics, the proposed method should be complemented by analyzing the natural frequencies of the motor structure and the forcing frequencies of the radial force harmonics.
- 6 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Industry Applications
- Vol. 2, 70-81
Open AccessAnalytical Calculation of Temporal and Circumferential Orders of Radial Force Density Harmonics in External-Rotor and Internal-Rotor Switched Reluctance Machines
This paper presents an analytical method to calculate the temporal and circumferential orders of the radial force density harmonics in switched reluctance machines(SRMs) without running the electromagnetic finite element analysis (FEA). The characteristics of the radial force density harmonics in several SRM topologies are investigated, including the 6/4, 24/16, and 6/14 internal-rotor (IR) SRMs, and 12/16 and 18/24 external-rotor(ER) SRM. The study shows that the temporal and circumferential orders of the radial force density harmonics depend on the pole configuration, the rotational directions of the rotor, the phase excitation sequence, and the rotor or stator radial force density waveform. The acoustic noise of a four-phase 8/6 internal-rotor SRM and a three-phase 12/16 external-rotor SRM was experimentally measured to validate the calculation of the temporal and circumferential orders of the radial force density harmonics. The proposed analytical method helps locate the possible radial force density harmonics of a given SRM configuration. In order to determine the dominant radial force harmonics, the proposed method should be complemented by analyzing the natural frequencies of the motor structure and the forcing frequencies of the radial force harmonics.
- 12 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 36 (3) , 2099-2109
A Novel Three-Dimensional Analytical Approach for Acoustic Noise Modeling in Switched Reluctance Machines
Acoustic noise modeling, analysis, and reduction are critical in the design of switched reluctance machines for noise-sensitive applications. Although the analytical method can provide a fast simulation of the acoustic noise, it is generally less accurate compared to the numerical method. In order to improve the simulation accuracy, a novel analytical method is presented in this paper. The proposed method considers the excitation of the high-axial-order vibration modes to simulate the vibration behavior and the acoustic noise in the three-dimensional (3D) domain. Methods of obtaining the input data for the 3D analytical simulations are presented. The acoustic noise results obtained from the numerical simulations and experiments from an 8/6 switched reluctance motor drive are used to validate the analytical method presented in this paper.
- 12 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 36 (3) , 2099-2109
A Novel Three-Dimensional Analytical Approach for Acoustic Noise Modeling in Switched Reluctance Machines
Acoustic noise modeling, analysis, and reduction are critical in the design of switched reluctance machines for noise-sensitive applications. Although the analytical method can provide a fast simulation of the acoustic noise, it is generally less accurate compared to the numerical method. In order to improve the simulation accuracy, a novel analytical method is presented in this paper. The proposed method considers the excitation of the high-axial-order vibration modes to simulate the vibration behavior and the acoustic noise in the three-dimensional (3D) domain. Methods of obtaining the input data for the 3D analytical simulations are presented. The acoustic noise results obtained from the numerical simulations and experiments from an 8/6 switched reluctance motor drive are used to validate the analytical method presented in this paper.
- 4 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 7 (3) , 1548-1560
Design of Multilayer Concentric Ferrite-Magnet Machines for a Traction Application
This paper proposes two different interior permanent magnet (IPM) motor-generator designs for a hybrid electric vehicle application. The paper shows the trade-offs, merits, and demerits of two feasible designs of ferrite-magnet machines for such an application. Both designs use multilayer concentric ferrite magnets. They use different winding topologies: 48-slot 8-pole (48/8) integral-slot and 60/8 fractional-slot topologies. The width, length, and location of the embedded rotor magnets, in addition to the shape of the flux barriers, are optimized to achieve the required performance within the given constraints. The torque ripple of both designs is kept below 5 % at the base-speed operating point without applying skewing. The electromagnetic performance characteristics of both designs at the base-speed and maximum-speed operating points are presented. The efficiency maps of both designs throughout the entire speed range are also investigated. Moreover, the paper presents an irreversible demagnetization analysis of the utilized ferrite magnets at different operating conditions. Spin analysis is performed to study the structural integrity of the proposed designs. Experimental results of both machines are provided for validation.
- 4 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 7 (3) , 1548-1560
Design of Multilayer Concentric Ferrite-Magnet Machines for a Traction Application
This paper proposes two different interior permanent magnet (IPM) motor-generator designs for a hybrid electric vehicle application. The paper shows the trade-offs, merits, and demerits of two feasible designs of ferrite-magnet machines for such an application. Both designs use multilayer concentric ferrite magnets. They use different winding topologies: 48-slot 8-pole (48/8) integral-slot and 60/8 fractional-slot topologies. The width, length, and location of the embedded rotor magnets, in addition to the shape of the flux barriers, are optimized to achieve the required performance within the given constraints. The torque ripple of both designs is kept below 5 % at the base-speed operating point without applying skewing. The electromagnetic performance characteristics of both designs at the base-speed and maximum-speed operating points are presented. The efficiency maps of both designs throughout the entire speed range are also investigated. Moreover, the paper presents an irreversible demagnetization analysis of the utilized ferrite magnets at different operating conditions. Spin analysis is performed to study the structural integrity of the proposed designs. Experimental results of both machines are provided for validation.
- Open Access
- 23 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Industry Applications
- Vol. 1, 63-73
Source of Acoustic Noise in a 12/16 External-Rotor Switched Reluctance Motor: Stator Tangential Vibration and Rotor Radial Vibration
Compared with internal-rotor switched reluctance motors (SRMs), external-rotor (ER) SRMs can show different vibration and acoustic noise behavior due to the differences in the designs, e.g. thinner rotor back iron to achieve smaller inertia, and longer stator pole height to improve the electromagnetic performance. This paper presents the considerations in the modeling and analysis of the acoustic noise sources of an ER SRM stator and rotor. The harmonic components of the stator tangential force density and rotor radial force density are analyzed and compared. The vibration modes, the vibration behavior, and acoustic noise of the stator and rotor are also compared. A 12/16 external-rotor SRM designed for a direct-drive E-bike application is used for the modeling, analysis, and experimental validation of vibration and acoustic noise. It is concluded that both the stator tangential vibration and the rotor radial vibration can be sources of the acoustic noise in an ER SRM.
- 23 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Industry Applications
- Vol. 1, 63-73
Open AccessSource of Acoustic Noise in a 12/16 External-Rotor Switched Reluctance Motor: Stator Tangential Vibration and Rotor Radial Vibration
Compared with internal-rotor switched reluctance motors (SRMs), external-rotor (ER) SRMs can show different vibration and acoustic noise behavior due to the differences in the designs, e.g. thinner rotor back iron to achieve smaller inertia, and longer stator pole height to improve the electromagnetic performance. This paper presents the considerations in the modeling and analysis of the acoustic noise sources of an ER SRM stator and rotor. The harmonic components of the stator tangential force density and rotor radial force density are analyzed and compared. The vibration modes, the vibration behavior, and acoustic noise of the stator and rotor are also compared. A 12/16 external-rotor SRM designed for a direct-drive E-bike application is used for the modeling, analysis, and experimental validation of vibration and acoustic noise. It is concluded that both the stator tangential vibration and the rotor radial vibration can be sources of the acoustic noise in an ER SRM.
- 1 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1147-1152
Study on the Effect of Dynamic Eccentricity on Acoustic Noise of an Interior Permanent Magnet Traction Motor
The modeling of acoustic noise is an important step in the design of traction motors for noise-sensitive applications. Eccentricity, which is a common type of manufacturing imperfection, can be a source of acoustic noise in traction motors. This paper presents a comprehensive analysis of the effect of dynamic eccentricity on the acoustic noise in a 48/8 interior permanent magnet traction motor. After considering the dynamic eccentricity, the extra dominant radial force harmonics are identified. The acoustic noise simulation is conducted based on a fast-numerical method, which can significantly reduce the computation cost without sacrificing the accuracy. The effect of dynamic eccentricity on the acoustic noise performance of the motor is discussed. Results show that a higher Sound Pressure Level (SPL) appears in a wider speed range when dynamic eccentricity is considered.
- 1 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1147-1152
Study on the Effect of Dynamic Eccentricity on Acoustic Noise of an Interior Permanent Magnet Traction Motor
The modeling of acoustic noise is an important step in the design of traction motors for noise-sensitive applications. Eccentricity, which is a common type of manufacturing imperfection, can be a source of acoustic noise in traction motors. This paper presents a comprehensive analysis of the effect of dynamic eccentricity on the acoustic noise in a 48/8 interior permanent magnet traction motor. After considering the dynamic eccentricity, the extra dominant radial force harmonics are identified. The acoustic noise simulation is conducted based on a fast-numerical method, which can significantly reduce the computation cost without sacrificing the accuracy. The effect of dynamic eccentricity on the acoustic noise performance of the motor is discussed. Results show that a higher Sound Pressure Level (SPL) appears in a wider speed range when dynamic eccentricity is considered.
- 11 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 69 (7) , 7172-7186
Making the Case for Switched Reluctance Motors for Propulsion Applications
This paper makes the case that Switched Reluctance Motor (SRM) is an exceptionally attractive technology to respond to the increasing demand in propulsion applications for high-efficiency, high-performance, and low-cost motors with a more secure supply chain. The paper also presents methods to effectively reduce torque ripple and acoustic noise, which have been the major issues impeding the widespread use of SRMs. Finally, SRM designs for two propulsion motors, one for an e-bike and the other for a hybrid electric vehicle application, are presented which have been proposed to replace permanent magnet machines.
- 11 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 69 (7) , 7172-7186
Making the Case for Switched Reluctance Motors for Propulsion Applications
This paper makes the case that Switched Reluctance Motor (SRM) is an exceptionally attractive technology to respond to the increasing demand in propulsion applications for high-efficiency, high-performance, and low-cost motors with a more secure supply chain. The paper also presents methods to effectively reduce torque ripple and acoustic noise, which have been the major issues impeding the widespread use of SRMs. Finally, SRM designs for two propulsion motors, one for an e-bike and the other for a hybrid electric vehicle application, are presented which have been proposed to replace permanent magnet machines.
- Open Access
- 1 March 2020
- Published by Institution of Engineering and Technology (IET) in IET Electrical Systems in Transportation
- Vol. 10 (1) , 35-43
Prediction of acoustic noise and vibration of a 24/16 traction switched reluctance machine
This study presents a numerical modelling approach for the prediction of vibration and acoustic noise for a 24/16 traction switched reluctance machine (SRM). The numerical modelling includes the simulation of electromagnetic force in JMAG, the calculation of natural frequencies and the simulation of vibration and acoustic noise in ACTRAN. Considerations in the modelling of geometries, meshing and contacts of the 24/16 SRM are discussed to ensure the accuracy of the numerical simulation. Two‐dimensional fast Fourier transform (FFT) is applied to the radial nodal force at the stator pole tip to analyse the dominant harmonics. FFT is also applied to the simulated surface displacement of the housing and the sound pressure at 2000 rpm to analyse their dominant frequency components. The dominant harmonics for the vibration and acoustic noise at 2000 rpm are confirmed. The numerical modelling method presented in this study can also be applied to the other SRMs and electric machines to predict the vibration behaviour and the radiated acoustic noise.
- 1 March 2020
- Published by Institution of Engineering and Technology (IET) in IET Electrical Systems in Transportation
- Vol. 10 (1) , 35-43
Open AccessPrediction of acoustic noise and vibration of a 24/16 traction switched reluctance machine
This study presents a numerical modelling approach for the prediction of vibration and acoustic noise for a 24/16 traction switched reluctance machine (SRM). The numerical modelling includes the simulation of electromagnetic force in JMAG, the calculation of natural frequencies and the simulation of vibration and acoustic noise in ACTRAN. Considerations in the modelling of geometries, meshing and contacts of the 24/16 SRM are discussed to ensure the accuracy of the numerical simulation. Two‐dimensional fast Fourier transform (FFT) is applied to the radial nodal force at the stator pole tip to analyse the dominant harmonics. FFT is also applied to the simulated surface displacement of the housing and the sound pressure at 2000 rpm to analyse their dominant frequency components. The dominant harmonics for the vibration and acoustic noise at 2000 rpm are confirmed. The numerical modelling method presented in this study can also be applied to the other SRMs and electric machines to predict the vibration behaviour and the radiated acoustic noise.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 3845-3851
A Comprehensive Analysis of the Acoustic Noise in an Interior Permanent Magnet Traction Motor
Modeling and analysis of acoustic noise is one of the important design phases for a traction motor in the noise-sensitive applications, such as hybrid electric vehicles. This paper presents a comprehensive analysis on the acoustic noise and the radial force density harmonics in a 48/8 interior permanent magnet (IPM) traction motor designed for an electrified powertrain. Detailed acoustic modeling and analysis based on the numerical method is presented. The techniques on improving the simulation accuracy and reducing the computation cost of the numerical modeling is also analyzed. The effect of the two-step skewed rotor on the radial force density harmonics is discussed. The sound pressure level waterfall diagram and the analysis of the radial force density harmonics confirm the dominant vibration mode and the dominant harmonics of the radial force density. The acoustic noise analysis process presented in this paper develops the basis for the acoustic noise reduction by optimizing the rotor stepped skew angles.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 3845-3851
A Comprehensive Analysis of the Acoustic Noise in an Interior Permanent Magnet Traction Motor
Modeling and analysis of acoustic noise is one of the important design phases for a traction motor in the noise-sensitive applications, such as hybrid electric vehicles. This paper presents a comprehensive analysis on the acoustic noise and the radial force density harmonics in a 48/8 interior permanent magnet (IPM) traction motor designed for an electrified powertrain. Detailed acoustic modeling and analysis based on the numerical method is presented. The techniques on improving the simulation accuracy and reducing the computation cost of the numerical modeling is also analyzed. The effect of the two-step skewed rotor on the radial force density harmonics is discussed. The sound pressure level waterfall diagram and the analysis of the radial force density harmonics confirm the dominant vibration mode and the dominant harmonics of the radial force density. The acoustic noise analysis process presented in this paper develops the basis for the acoustic noise reduction by optimizing the rotor stepped skew angles.
- 25 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 5 (3) , 602-617
Modeling and Analysis of Electric Motors: State-of-the-Art Review
This paper presents a comprehensive state-of-the-art review of the modeling and analysis methods for the multidisciplinary design of electric motors for various applications including vehicular power and propulsion systems and electrified powertrains. It covers the important aspects of different engineering domains, such as dynamic modeling, loss calculations, demagnetization analysis, thermal modeling, acoustic noise and vibration analysis, and mechanical stress modeling. This paper intends to guide the electric motor designers through examples and results on how to apply different analysis techniques on electric motors.
- 25 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 5 (3) , 602-617
Modeling and Analysis of Electric Motors: State-of-the-Art Review
This paper presents a comprehensive state-of-the-art review of the modeling and analysis methods for the multidisciplinary design of electric motors for various applications including vehicular power and propulsion systems and electrified powertrains. It covers the important aspects of different engineering domains, such as dynamic modeling, loss calculations, demagnetization analysis, thermal modeling, acoustic noise and vibration analysis, and mechanical stress modeling. This paper intends to guide the electric motor designers through examples and results on how to apply different analysis techniques on electric motors.
- 18 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 5 (1) , 93-106
Radial Force Density Analysis of Switched Reluctance Machines: The Source of Acoustic Noise
- 18 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 5 (1) , 93-106
Radial Force Density Analysis of Switched Reluctance Machines: The Source of Acoustic Noise