Abstract
This study investigates the feasibility of using Inconel 600 wire mesh as an inlet absorber in open cavity receivers for solar tower applications. The effects of surface temperature gradients and fluid flow conditions on the thermo-mechanical behavior of the absorber are analyzed using a combined numerical and experimental approach. A semi-analytical model coupled with CFD simulations is employed to evaluate the temperature distribution and its dependence on mass flow rate and incident radiation. The results indicate that the ratio between mass flow and incident radiation is a key parameter governing thermal stability, with reduced values leading to localized hot spots. Post-experimental analysis, including optical microscopy, SEM, and XRD, reveals that degradation of the first mesh layer is primarily driven by stress-assisted oxidation. Local overheating, particularly in regions of non-uniform irradiation, promotes oxide scale formation and spallation, resulting in material damage.,The study further demonstrates that woven mesh structures exhibit two inherent limitations: non-uniform irradiation at wire intersections and local stress concentrations due to bending. These factors contribute to accelerated degradation under high-temperature conditions. It is therefore concluded that conventional woven wire mesh is not suitable for operation near the critical temperature limits of Inconel 600, and alternative configurations, such as straight-wire arrangements, are proposed as a promising design direction.

This publication has 19 references indexed in Scilit: